6ES7223-1BL22-0XA0 SIMATIC S7-200, DIGITAL I/O

Product Code: 6ES7223-1BL22-0XA0

Availability: In Stock

Price: $229.00
  
 
EM 223 digital input/output module

-
SIMATIC S7-200, DIGITAL I/O EM 223, FOR S7-22X CPU ONLY, 16DI 24V DC, SINK/SOURCE, 16DO 24V DC, 0.75A/POINT,SOURCE
Supply voltage
Load voltage L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
from backplane bus 5 V DC, max. 160 mA
Power losses
Power loss, typ. 6 W
Digital inputs
Number of digital inputs 16
Input voltage
Type of input voltage DC
Rated value, DC 24 V
for signal "0" 0 to 5 V
for signal "1" 15 to 30 VDC
Input current
for signal "1", typ. 4 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", max. 4.5 ms
Digital outputs
Number of digital outputs 16
Short-circuit protection No
Limitation of inductive shutdown voltage to L+ (-48 V)
Output voltage
for signal "0", max. 0.1 V
for signal "1", min. 20 V
Output current
for signal "1" rated value 750 mA
Aggregate current of outputs (per group)
all mounting positions
maximum current per conductor/group 3 A; 3 / 3 / 6
Relay outputs
Switching capacity of contacts
with inductive load, max. 0.75 A; per output
on lamp load, max. 5 W
with resistive load, max. 0.75 A; per output
Cable length
Cable length, shielded, max. 500 m
Cable length unshielded, max. 150 m
Encoder
Connectable encoders
2-wire sensor Yes
Permissible quiescent current (2-wire sensor), max. 1 mA
Galvanic isolation
Galvanic isolation digital inputs
Galvanic isolation digital inputs Yes; Optocoupler
between the channels, in groups of 4
Galvanic isolation digital outputs
Galvanic isolation digital outputs Yes; Optocoupler
between the channels, in groups of 4; 4 / 4 / 8
Isolation
Isolation checked with 500 V AC
Connection method
Plug-in I/O terminals Yes
Dimensions
Width 137.5 mm
Height 80 mm
Depth 62 mm
Weights
Weight, approx. 360 g
Status Jun 16, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: