6GK7542-5DX00-0XE0 COMMUNICATION MODULE CM 1542-5

6GK7542-5DX00-0XE0 COMMUNICATION MODULE CM 1542-5

Product Code: 6GK7542-5DX00-0XE0

Availability: In Stock

Price: $100,000,000,000.00
Qty:
Add to Wish List
Add to Compare
Artikelnummer 6GK7542-5DX00-0XE0
Product type designation CM 1542-5
COMMUNICATION MODULE CM 1542-5 FOR CONNECTING S7-1500 TO PROFIBUS DP AS DP-MASTER OR DP-SLAVE: S7- AND PG/OP- COMMUNICATION, CLOCK SYNCHRONISATION, DIAGNOSIS
Transmission rate
Transfer rate
● at the 1st interface / acc. to PROFIBUS 9.6 kbit/s ... 12 Mbit/s
Interfaces
Number of interfaces / acc. to Industrial Ethernet 0
Number of electrical connections
● at the 1st interface / acc. to PROFIBUS 1
Design of the electrical connection
● at the 1st interface / acc. to PROFIBUS 9-pin Sub-D socket (RS485)
Supply voltage, current consumption, power loss
Type of voltage / of the supply voltage DC
Supply voltage / 1 / from backplane bus 15 V
Relative symmetrical tolerance / for DC
● at 15 V 3 %
Consumed current
● from backplane bus / for DC / at 15 V / typical 0.2 A
Active power loss 3 W
Permitted ambient conditions
Ambient temperature
● for vertical installation / during operation 0 ... 40 °C
● for horizontally arranged busbars / during operation 0 ... 60 °C
● during storage -40 ... +70 °C
● during transport -40 ... +70 °C
Relative humidity / at 25 °C / without condensation / during operation / maximum 95 %
Protection class IP IP20
Design, dimensions and weight
Module format Compact module S7-1500 single width
Width 35 mm
Height 142 mm
Depth 129 mm
Net weight 0.4 kg
Mounting type
● S7-1500 rail mounting Yes
Product properties, functions, components / general
Number of units
● per CPU / maximum 8
● Note depending on CPU type
Performance data
Performance data / PROFIBUS DP
Service / as DP master
● DPV1 Yes
Number of DP slaves / on DP master / usable 125
Amount of data
● of the address area of the inputs / as DP master / total 8192 byte
● of the address area of the outputs / as DP master / total 8192 byte
● of the address area of the inputs / per DP slave 244 byte
● of the address area of the outputs / per DP slave 244 byte
Service / as DP slave
● DPV0 Yes
● DPV1 Yes
Amount of data
● of the address area of the inputs / as DP slave / total 240 byte
● of the address area of the outputs / as DP slave / total 240 byte
Performance data / S7 communication
Number of possible connections / for S7 communication
● maximum 40
● Note depending on the system upper limit
Performance data / multi-protocol mode
Number of active connections / with multi-protocol mode 40
Performance data / telecontrol
Protocol / is supported
● TCP/IP No
Product functions / management, configuration
Configuration software
● required STEP 7 Professional V12 (TIA Portal) or higher
Identification & maintenance function
● I&M0 - device-specific information Yes
● I&M1 – higher-level designation/location designation Yes
Product functions / Diagnosis
Product function / Web-based diagnostics Yes; yes, via S7-1500 CPU
Product functions / Time
Product function / pass on time synchronization Yes
Further Information / Internet Links
Internet-Link
● to website: Selector SIMATIC NET SELECTION TOOL http://www.siemens.com/snst
● to website: Industrial communication http://www.siemens.com/simatic-net
● to website: Information and Download Center http://www.siemens.com/automation/net/catalog
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx Download Manager http://www.siemens.com/cax
● to website: Industry Online Support http://support.automation.siemens.com
last modified: 03.11.2014
Date
04.11.2014		 Changes preserved
© Copyright Siemens AG 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue