| Product type designation |
CP 343-1 ERPC |
|
COMMUNICATIONSPROCESSOR CP343-1 ERPC FOR CONNECTING SIMATIC S7-300 CPU TO INDUSTRIAL ETHERNET AND TO VARIOUS DATABASES. FUNCTIONS: TCP/UDP, S7-COMM, OPEN COMM. WITH AND WITHOUT RFC 1006, MULTICAST, WEBSERVER, TIME VIA SIMATIC PROCESS OR NTP, ACCESS PROTECTION VIA IP-ACCESS LIST, SNMP, DHCP, C-PLUG, GIGABIT-SS 1X RJ45 (10/100/1000 MBIT); |
| Transmission rate |
| Transfer rate |
|
| ● at the 1st interface |
10 ... 1000 Mbit/s |
| Interfaces |
| Number of interfaces / acc. to Industrial Ethernet |
1 |
| Number of electrical connections |
|
| ● at the 1st interface / acc. to Industrial Ethernet |
1 |
| ● for power supply |
1 |
| Design of the electrical connection |
|
| ● at the 1st interface / acc. to Industrial Ethernet |
RJ45 port |
| ● for power supply |
2-pole plugable terminal block |
| design of the removable storage / C-PLUG |
Yes |
| Supply voltage, current consumption, power loss |
| Type of voltage / of the supply voltage |
DC |
| Supply voltage / 1 / from backplane bus |
5 V |
| Supply voltage / external |
24 V |
| Relative positive tolerance / for DC / at 24 V |
20 % |
| Relative negative tolerance / for DC / at 24 V |
15 % |
| Consumed current |
|
| ● from backplane bus / for DC / at 5 V / typical |
0.3 A |
| ● from external supply voltage / for DC / at 24 V / typical |
0.16 A |
| ● from external supply voltage / for DC / at 24 V / maximum |
0.6 A |
| Active power loss |
14.7 W |
| Permitted ambient conditions |
| Ambient temperature |
|
| ● for vertical installation / during operation |
0 ... 40 °C |
| ● for horizontally arranged busbars / during operation |
0 ... 60 °C |
| ● during storage |
-40 ... +70 °C |
| ● during transport |
-40 ... +70 °C |
| Relative humidity / at 25 °C / without condensation / during operation / maximum |
95 % |
| Protection class IP |
IP20 |
| Design, dimensions and weight |
| Module format |
Compact module S7-300 double width |
| Width |
80 mm |
| Height |
125 mm |
| Depth |
120 mm |
| Net weight |
0.8 kg |
| Mounting type |
|
| ● S7-300 rail mounting |
Yes |
| Performance data |
| Performance data / open communication |
| Number of possible connections / for open communication / by means of SEND/RECEIVE blocks |
|
| ● maximum |
8 |
| Amount of data |
|
| ● as user data per ISO on TCP connection / for open communication / by means of SEND/RECEIVE blocks / maximum |
8 Kibyte |
| ● as user data per TCP connection / for open communication / by means of SEND/RECEIVE blocks / maximum |
8 Kibyte |
| ● as user data per UDP connection / for open IE communication / by means of SEND/RECEIVE blocks / maximum |
2 Kibyte |
| Number of Multicast stations |
8 |
| Performance data / S7 communication |
| Number of possible connections / for S7 communication |
|
| ● maximum |
8 |
| ● Note |
also 2 PG/OP connections and 1 diagnostics connection |
| Performance data / multi-protocol mode |
| Number of active connections / with multi-protocol mode |
32 |
| Performance data / IT functions |
| Number of possible connections |
|
| ● as server / by means of HTTP / maximum |
4 |
| Number of possible write cycles / of the flash memory cells |
100000 |
| Performance data / ERPC functions |
| Number of possible connections / for communication with ERP or MES stations / maximum |
8 |
| Number of possible logical triggers / per CP / maximum |
8 |
| Number of configurable ERPC symbols for database access |
|
| ● per CPU / maximum |
2000 |
| ● per logical trigger / maximum |
255 |
| Amount of data / as user data and header information per logical trigger |
8 Kibyte |
| Performance data / telecontrol |
| Protocol / is supported |
|
| ● TCP/IP |
Yes |
| Product functions / management, configuration |
| Product function / MIB support |
Yes |
| Protocol / is supported |
|
| ● SNMP v1 |
Yes |
| ● DCP |
Yes |
| ● LLDP |
Yes |
| Configuration software |
|
| ● required |
STEP 7 V5.4 SP5 + HSP or higher |
| Identification & maintenance function |
|
| ● I&M0 - device-specific information |
Yes |
| ● I&M1 – higher-level designation/location designation |
Yes |
| Product functions / Diagnosis |
| Product function / Web-based diagnostics |
Yes |
| Product functions / switch |
| Product feature / Switch |
No |
| Product functions / Redundancy |
| Product function |
|
| ● Ring redundancy |
No |
| Product functions / Security |
| Product function |
|
| ● password protection for Web applications |
No |
| ● ACL - IP-based |
Yes |
| ● ACL - IP-based for PLC/routing |
No |
| ● switch-off of non-required services |
Yes |
| ● Blocking of communication via physical ports |
Yes |
| ● log file for unauthorized access |
No |
| Product functions / Time |
| Product function / SICLOCK support |
Yes |
| Product function / pass on time synchronization |
Yes |
| Protocol / is supported / NTP |
Yes |
| Further Information / Internet Links |
| Internet-Link |
|
| ● to website: Selector SIMATIC NET SELECTION TOOL |
http://www.siemens.com/snst |
| ● to website: Industrial communication |
http://www.siemens.com/simatic-net |
| ● to website: Information and Download Center |
http://www.siemens.com/automation/net/catalog |
| ● to website: Image database |
http://automation.siemens.com/bilddb |
| ● to website: CAx Download Manager |
http://www.siemens.com/cax |
| ● to website: Industry Online Support |
http://support.automation.siemens.com |
| last modified: |
03.11.2014 |
Date
03.11.2014 |
Changes preserved
© Copyright Siemens AG 2014 |
