6GK7243-1PX30-0XE0 COMMUNICATION PROCESSOR CP 1243-1 IEC

6GK7243-1PX30-0XE0 COMMUNICATION PROCESSOR CP 1243-1 IEC

Product Code: 6GK7243-1PX30-0XE0

Availability: In Stock

Price: $284.28
Qty:
Add to Wish List
Add to Compare
Artikelnummer 6GK7243-1PX30-0XE0
Product type designation CP 1243-1 IEC
COMMUNICATIONS PROCESSOR CP 1243-1 IEC FOR CONNECTING SIMATIC S7-1200 TO CONTROL CENTER W. PROTOCOL IEC60870-5-104
Transmission rate
Transfer rate
● at the 1st interface 10 ... 100 Mbit/s
Interfaces
Number of interfaces / acc. to Industrial Ethernet 1
Number of electrical connections
● at the 1st interface / acc. to Industrial Ethernet 1
● for power supply 0
Design of the electrical connection
● at the 1st interface / acc. to Industrial Ethernet RJ45 port
Supply voltage, current consumption, power loss
Type of voltage / of the supply voltage DC
Supply voltage / 1 / from backplane bus 5 V
Consumed current
● from backplane bus / for DC / at 5 V / typical 0.25 A
Active power loss 1.25 W
Permitted ambient conditions
Ambient temperature
● for vertical installation / during operation -20 ... +60 °C
● for horizontally arranged busbars / during operation -20 ... +70 °C
● during storage -40 ... +70 °C
● during transport -40 ... +70 °C
Relative humidity / at 25 °C / without condensation / during operation / maximum 95 %
Protection class IP IP20
Design, dimensions and weight
Module format Compact module S7-1200 single width
Width 30 mm
Height 110 mm
Depth 75 mm
Net weight 0.122 kg
Mounting type
● 35 mm DIN rail mounting Yes
● wall mounting Yes
Product properties, functions, components / general
Number of units
● per CPU / maximum 3
Performance data
Performance data / S7 communication
Number of possible connections / for S7 communication
● Note like CPU
Performance data / telecontrol
Suitability for use
● Node station No
● substation Yes
● TIM control center No
Connection to the control center control center with IEC 60870-5 function
Connection to the control center / by means of a permanent connection supported
Connection to the control center / Note Connection to Scada system using IEC 60870-5
Protocol / is supported
● DNP3 No
● IEC 60870-5 Yes
Product function / data buffering if connection is aborted Yes
● Note 64,000 values
Number of data points per station / maximum 200
Performance data / Teleservice
Diagnostics function / online diagnostics with SIMATIC STEP 7 Yes
Product function
● program download with SIMATIC STEP 7 Yes
● Remote firmware update Yes
Product functions / management, configuration
Configuration software
● required STEP 7 Basic/Professional V13 (TIA Portal) or higher
Product functions / Time
Protocol / is supported / NTP No
Further Information / Internet Links
Internet-Link
● to website: Selector SIMATIC NET SELECTION TOOL http://www.siemens.com/snst
● to website: Industrial communication http://www.siemens.com/simatic-net
● to website: Information and Download Center http://www.siemens.com/automation/net/catalog
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx Download Manager http://www.siemens.com/cax
● to website: Industry Online Support http://support.automation.siemens.com
last modified: 03.11.2014
Date
03.11.2014		 Changes preserved
© Copyright Siemens AG 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue