6GK6091-0AT1.-.... RUGGEDCOM RS910NC

Product Code: 6GK6091-0AT1.-....

Availability: In Stock

Price: $100,000,000,000.00
Qty:
Add to Wish List
Add to Compare
Artikelnummer 6GK6091-0AT1.-....
Product type designation RUGGEDCOM RS910NC
Product description serial device server with an integrated fully managed Ethernet switch, 56-bit Encryption, 2 serial ports (RS485/RS422/RS232) and/or up to 3 Ethernet ports (copper or fiber). Multimode, Singlemode, Multiple connector types (ST, MTRJ, LC, SC)
THE RUGGEDCOM RS910NC IS AN INDUSTRIALLY HARDENED SERIAL DEVICE SERVER WITH AN INTEGRATED, FULLY MANAGED, ETHERNET SWITCH, DESIGNED TO OPERATE RELIABLY IN ELECTRICALLY HARSH AND CLIMATICALLY DEMANDING ENVIRONMENTS. 56-BIT ENCRYPTION; 2 SERIAL PORTS (RS485/ RS422/RS232) AND/OR UP TO 3 ETHERNET PORTS (COPPER OR FIBER). MULTIMODE, SINGLEMODE; MULTIPLE CONNECTOR TYPES (ST, MTRJ, LC, SC)
Transmission rate
Transfer rate 10 Mbit/s, 100 Mbit/s
● acc. to RS 232 300 bit/s ... 115200 bit/s
● acc. to RS 422/485 300 bit/s ... 115200 bit/s
Interfaces
Number of electrical/optical connections
● for network components or terminal equipment / maximum 3
Number of electrical connections
● for network components or terminal equipment 3
● for network components or terminal equipment / maximum 3
● for serial interfaces / acc. to RS 232/RS 422/RS 485 / maximum 2
● for signaling contact 1
● for power supply 1
● for redundant voltage supply 1
Design of the electrical connection
● for network components or terminal equipment RJ45-Port, SUB-D 9 pin
● for signaling contact 3-pole terminal block
● for power supply 3-pole terminal block
Number of optical interfaces
● for network components or terminal equipment / maximum 3
● for fiber optic cable / at 10 Mbit/s 3
● for fiber optic cable / at 100 Mbit/s 3
Design of the optical interface / for fiber optic cable
● at 10 Mbit/s ST-Port (BFOC-Port)
● at 100 Mbit/s ST-/SC-/MTRJ-/LC-Port
Range / at the optical interface / depending on the optical fiber used
● minimum 2 km
● maximum 90 km
Signal-Inputs/outputs
Relay design Form-C contact relay
Operating voltage / of the signaling contacts
● for DC / Rated value 30 V
Operating current / of the signaling contacts
● for DC / maximum 1 A
● for DC / at 30 V / maximum 1 A
Supply voltage, current consumption, power loss
product options / wide range power supply Yes
Supply voltage / 1 / Rated value 24 V
● Supply voltage / 1 / Rated value 18 ... 36 V
● Type of voltage / 1 / of the supply voltage DC
● Consumed current / 1 / at rated supply voltage / maximum 0.4 A
Supply voltage / 2 / Rated value 48 V
● Supply voltage / 2 / Rated value 36 ... 59 V
● Type of voltage / 2 / of the supply voltage DC
● Consumed current / 2 / at rated supply voltage / maximum 0.2 A
Supply voltage / 3 / Rated value 110 V
● Supply voltage / 3 / Rated value 88 ... 300 V
● Type of voltage / 3 / of the supply voltage DC
Supply voltage / 4 / Rated value
● Supply voltage / 4 / Rated value 85 ... 265 V
● Type of voltage / 4 / of the supply voltage AC
Product component / fusing at power supply input Yes
Active power loss
● maximum 10 W
Permitted ambient conditions
Ambient temperature
● during operation -40 ... +85 °C
● during storage -40 ... +85 °C
● during transport -40 ... +85 °C
● Note A maximum operating temperature of +85 °C is permissible for a duration of 16 hours
Relative humidity / at 25 °C / without condensation / during operation / maximum 95 %
Coating conformal coating optional
Operating condition / fanless operation Yes
Protection class IP IP40
Design, dimensions and weight
Design compact
Width 66 mm
Height 188 mm
Depth 127 mm
Net weight 1.22 kg
Material / of the enclosure 20 AWG galvanized steel enclosure
Mounting type
● 35 mm DIN rail mounting Yes
● S7-300 rail mounting No
● 19-inch installation No
● wall mounting Yes
Product properties, functions, components / general
Product component / Integrated / Ethernet switch Yes
Product function
● DNP 3.0 to DNP conversion via UDP/TCP Yes
● Modbus RTU to Modbus TCP conversion Yes
● RAW socket mode for any serial protocols Yes
Protocol / is supported
● DNP3 Yes
● GVRP Yes
● HTTP Yes
● Modbus TCP Yes
● TFTP Yes
Number of priority channels 4
Operating mode
● multi-point Yes
● Point-to-point Yes
Adjustable port-rate-limitation 128 kbit/s ... 8 Mbit/s
Product function / port-rate-limiting Yes
Product property
● no head-off-line-blocking Yes
● Store & Forward switching method Yes
Protocol / is supported
● PPP Yes
● TIN Yes
Storage capacity
● of the MAC-address table 16 Kibyte
● of message buffer / maximum 1 Mibyte
Switch latency period 8 µs
Transfer rate / of the switch 1.8 Gbit/s
Product functions / management, configuration
Product function
● CLI Yes
● RMON Yes
● web-based management Yes
Protocol / is supported / Telnet Yes
Product functions / Diagnosis
Protocol / is supported
● SNMP v1 Yes
● SNMP v2c Yes
● SNMP v3 Yes
Product function
● MIB support Yes
● for MIB support
— by BRIDGE-MIB RFC1493
— by IF-MIB RFC2863
— by RMON-MIB RFC2819
— by RSTP-MIB draft-ietf-bridge-bridgemib-smiv2-03
— by SNMPv2-MIB RFC1907
— by SNMPv2-SMI RFC2578
— by SNMPv2-TC RFC2579
— by TCP-MIB RFC2012
— by UDP-MIB RFC2013
Product functions / VLAN
Number of VLANs / maximum 255
Product function / VLAN - port based Yes
VLAN identification number 1 ... 4094
Product functions / DHCP
Product function
● DHCP Option 82 Yes
Product functions / Redundancy
Product function
● redundancy procedure MSTP Yes
● redundancy procedure RSTP Yes
● eRSTP Yes
Protocol / is supported
● MSTP Yes
● RSTP Yes
Product functions / Security
Product function
● RADIUS client Yes
Protocol / is supported
● SSL No
● RADIUS Yes
● TACACS+ Yes
Key length
● with RSA 1024 bit
Product functions / Time
Protocol / is supported
● NTP No
● SNTP Yes
Standards, specifications, approvals
Standard
● for EMC FCC Part 15 (Class A), EN55022 (CISPR22 Class A)
● for safety / from CSA and UL UL 60950-1, CSA C22.2 no. 60950-7
● for hazardous zone / from CSA and UL Hazardous Locations: Class 1 Division 2
● for emitted interference EN 61000-6-4 (Class A)
● for interference immunity EN 61000-6-2
Laser protection class Complies with 21 CFR Chapter 1, Subchapter J
Certificate of suitability EN 61000-6-2, EN 61000-6-10
● relating to NEMA TS 2
● CE marking Yes
● C-Tick No
● IEC 61850-3 Yes
● IEEE 1613 Yes
● product conformity / acc. to IEEE 802.3-10BaseT Yes
● product conformity / acc. to IEEE 802.3u-100BaseTX Yes
● product conformity / acc. to IEEE 802.1x-port based Network Access Control Yes
● product conformity / acc. to IEEE 802.3u-100BaseFX Yes
● product conformity / acc. to IEEE 802.3x-Flow Control Yes
● product conformity / acc. to IEEE 802.3z-1000BaseLX Yes
● product conformity / acc. to IEEE 802.3ab-1000BaseT Yes
● product conformity / acc. to IEEE 802.3ad-Link Aggregation Yes
● product conformity / acc. to IEEE 802.1d-MAC Bridges Yes
● product conformity / acc. to IEEE 802.1d-STP Yes
● product conformity / acc. to IEEE 802.1p-class of service Yes
● product conformity / acc. to IEEE 802.1Q-VLAN tagging Yes
● product conformity / acc. to IEEE 802.1w-RRST Yes
● product conformity / RFC768-UDP Yes
● product conformity / RFC783-TFTP Yes
● product conformity / RFC791-IP Yes
● product conformity / RFC792-ICMP Yes
● product conformity / RFC793-TCP Yes
● product conformity / RFC826-ARP Yes
● product conformity / RFC854-Telnet Yes
● product conformity / RFC894-IP over Ethernet Yes
● product conformity / RFC1112-IGMPv1 Yes
● product conformity / RFC1519-CIDR Yes
● product conformity / RFC2030-SNTP Yes
● product conformity / RFC2068-HTTP Yes
● product conformity / RFC2236-IGMPv2 Yes
● product conformity / RFC2284-EAP Yes
● product conformity / RFC2475-Differentiated Service Yes
● product conformity / RFC2865-RADIUS Yes
● product conformity / RFC3414-SNMPv3-USM Yes
● product conformity / RFC3415-SNMPv3-VACM Yes
● product conformity / RFC1541-DHCP (client) Yes
● Product function / Transmission of serial data via IP-Networks Yes
Further Information / Internet Links
Internet-Link
● to website: Industry Mall/RUGGEDCOM selector http://ruggedcom-selector.automation.siemens.com
● to website: Siemens RUGGEDCOM http://siemens.com/ruggedcom
● to website: Selector for cables and connectors http://www.siemens.com/snst
● to website: Industrial communication http://www.siemens.com/simatic-net
● to website: Industry Mall http://www.siemens.com/industrial-controls/mall
● to website: Information and Download Center http://www.siemens.com/automation/net/catalog
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx Download Manager http://www.siemens.com/cax
● to website: Industry Online Support http://support.automation.siemens.com
Security information
Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4)
last modified: 27.10.2014
Date
30.10.2014		 Changes preserved
© Copyright Siemens AG 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue