6GK6002-0AC0.-.... RUGGEDCOM RMC20

Product Code: 6GK6002-0AC0.-....

Availability: In Stock

Price: $100,000,000,000.00
Qty:
Add to Wish List
Add to Compare
Artikelnummer 6GK6002-0AC0.-....
Product type designation RUGGEDCOM RMC20
Product description 2-Port media converter serial-to-fiber and serial standards, convert RS232 to either RS485 or RS422 serial standards
RUGGEDCOM RMC20 MEDIA CONVERTER IS A UTILITY-GRADE, PROTOCOL-INDEPENDENT, SERIAL-TO-FIBER AND SERIAL STANDARDS CONVERTER FOR ALL YOUR SERIAL COMMUNICATION REQUIREMENTS. THE RMC20 ALLOWS RS485, RS422, OR RS232 DEVICES OR NETWORKS TO COMMUNICATE OVER SECURE, NOISE IMMUNE, OPTICALLY ISOLATED, FIBER OPTIC CABLING ATEXTENDED DISTANCES AS WELL CONVERT RS232 TO EITHER RS485 OR RS422 SERIAL STANDARDS.
● acc. to RS 232 300 bit/s ... 115200 bit/s
● acc. to RS 422/485 300 bit/s ... 115200 bit/s
Interfaces
Number of electrical connections
● for network components or terminal equipment / maximum 1
● for serial interfaces / acc. to RS 232/RS 422/RS 485 / maximum 2
● for power supply 1
● for redundant voltage supply 0
Design of the electrical connection
● for network components or terminal equipment 7-pole terminal block
● for power supply 3-pole terminal block
Number of optical interfaces
● for network components or terminal equipment / maximum 1
● for fiber optic cable / in serial operation 1
Design of the optical interface / for fiber optic cable
● at 10 Mbit/s ST-Port (BFOC-Port)
Range / at the optical interface / depending on the optical fiber used
● minimum 2 km
● maximum 2 km
Supply voltage, current consumption, power loss
product options / wide range power supply Yes
Supply voltage / 1 / Rated value 24 V
● Supply voltage / 1 / Rated value 18 ... 36 V
● Type of voltage / 1 / of the supply voltage DC
Supply voltage / 2 / Rated value 48 V
● Supply voltage / 2 / Rated value 36 ... 59 V
● Type of voltage / 2 / of the supply voltage DC
Supply voltage / 3 / Rated value 110 V
● Supply voltage / 3 / Rated value 88 ... 300 V
● Type of voltage / 3 / of the supply voltage DC
Supply voltage / 4 / Rated value
● Supply voltage / 4 / Rated value 85 ... 265 V
● Type of voltage / 4 / of the supply voltage AC
Product component / fusing at power supply input Yes
Active power loss
● maximum 2 W
Permitted ambient conditions
Ambient temperature
● during operation -40 ... +85 °C
● during storage -40 ... +85 °C
● during transport -40 ... +85 °C
● Note A maximum operating temperature of +85 °C is permissible for a duration of 16 hours
Relative humidity / at 25 °C / without condensation / during operation / maximum 95 %
Coating conformal coating optional
Operating condition / fanless operation Yes
Protection class IP IP40
Design, dimensions and weight
Design compact
Width 58 mm
Height 109 mm
Depth 94 mm
Net weight 0.68 kg
Material / of the enclosure 21 AWG galvanized steel enclosure
Mounting type
● 35 mm DIN rail mounting Yes
● S7-300 rail mounting No
● 19-inch installation No
● wall mounting Yes
Product properties, functions, components / general
Product component / Integrated / Ethernet switch No
Product function
● DNP 3.0 to DNP conversion via UDP/TCP No
● Modbus RTU to Modbus TCP conversion No
● RAW socket mode for any serial protocols No
Protocol / is supported
● DNP3 No
● GVRP No
● HTTP No
● Modbus TCP No
● TFTP No
Product functions / management, configuration
Product function
● CLI No
● RMON No
● web-based management No
Protocol / is supported / Telnet No
Product functions / Diagnosis
Protocol / is supported
● SNMP v1 No
● SNMP v3 No
Product function
● MIB support No
Product functions / VLAN
Product function / VLAN - port based No
Product functions / DHCP
Product function
● DHCP client No
● DHCP Option 82 No
Product functions / Redundancy
Product function
● redundancy procedure MSTP No
● redundancy procedure RSTP No
● eRSTP No
Protocol / is supported
● MSTP No
● RSTP No
Product functions / Security
Product function
● IEEE 802.1x (radius) No
Protocol / is supported
● SSL No
Product functions / Time
Protocol / is supported
● NTP No
● SNTP No
Standards, specifications, approvals
Standard
● for EMC FCC Part 15 (Class A), EN55022 (CISPR22 Class A)
● for safety / from CSA and UL UL 60950-1, CSA C22.2 no. 60950-7
● for hazardous zone / from CSA and UL Hazardous Locations: Class 1 Division 2
● for emitted interference EN 61000-6-4 (Class A)
● for interference immunity EN 61000-6-2
Laser protection class Complies with 21 CFR Chapter 1, Subchapter J
Certificate of suitability EN 61000-6-2, EN 61000-6-10
● relating to NEMA TS 2
● CE marking Yes
● C-Tick No
● IEC 61850-3 Yes
● IEEE 1613 Yes
Further Information / Internet Links
Internet-Link
● to website: Industry Mall/RUGGEDCOM selector http://ruggedcom-selector.automation.siemens.com
● to website: Siemens RUGGEDCOM http://siemens.com/ruggedcom
● to website: Selector for cables and connectors http://www.siemens.com/snst
● to website: Industrial communication http://www.siemens.com/simatic-net
● to website: Industry Mall http://www.siemens.com/industrial-controls/mall
● to website: Information and Download Center http://www.siemens.com/automation/net/catalog
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx Download Manager http://www.siemens.com/cax
● to website: Industry Online Support http://support.automation.siemens.com
Security information
Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4)
last modified: 27.10.2014
Date
30.10.2014		 Changes preserved
© Copyright Siemens AG 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue