6ES7326-2BF10-0AB0 SM326, F-DO10XDC24V/2A PP, FAILSAFE

6ES7326-2BF10-0AB0 SM326, F-DO10XDC24V/2A PP, FAILSAFE

Product Code: 6ES7326-2BF10-0AB0

Availability: In Stock

Price: $100,000,000,000.00
Qty:
Add to Wish List
Add to Compare
Artikelnummer 6ES7326-2BF10-0AB0
SIMATIC S7, DIGITAL OUTPUT SM326, F-DO10 X DC24V/2A PP, FAILSAFE DIGITAL OUTPUTS FOR SIMATIC S7F SYSTEMS WITH DIAGNOST. INTERRUPT, LVV, UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1 X 40 PIN
Supply voltage
Load voltage L+
● Rated value (DC) 24 V; 1L+, 2L+, 3L+
Input current
from load voltage1L+, max. 100 mA; from supply voltage
from load voltage 2L+ (without load), max. 100 mA
from load voltage 3L+ (without load), max. 100 mA
from backplane bus 5 V DC, max. 100 mA
Power losses
Power loss, typ. 6 W
Digital outputs
Number of digital outputs 10
short-circuit protection Yes
Switching capacity of the outputs
● Lamp load, max. 5 W
Output current
● for signal "1" rated value 2 A
● for signal "1" permissible range for 0 to 40 °C, min. 7 mA
● for signal "1" permissible range for 0 to 40 °C, max. 2.4 A
● for signal "1" permissible range for 40 to 60 °C, min. 7 mA
● for signal "1" permissible range for 40 to 60 °C, max. 2.4 A
● for signal "0" residual current, max. 0.5 mA
Switching frequency
● with resistive load, max. 25 Hz
● with inductive load, max. 25 Hz
● on lamp load, max. 10 Hz
Aggregate current of outputs (per group)
horizontal installation
— up to 40 °C, max. 10 A
— up to 60 °C, max. 6 A
vertical installation
— up to 40 °C, max. 5 A
Cable length
● Cable length, shielded, max. 1 000 m
● Cable length unshielded, max. 600 m
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm Yes
Diagnostic messages
● Diagnostic information readable Yes
Diagnostics indication LED
● Fail-safe operation Yes
● Group error SF (red) Yes
Galvanic isolation
Galvanic isolation digital outputs
● between the channels Yes
● between the channels, in groups of 5
● between the channels and the backplane bus Yes
● between the channels and the power supply of the electronics Yes
Isolation
Isolation checked with 370V for 1 min
Standards, approvals, certificates
Highest safety class achievable in safety mode
● acc. to DIN VDE 0801 AK 5 and 6
● acc. to EN 954 Cat. 4
● SIL according to IEC 61508:2010 SIL 3
Connection method
required front connector 40-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 330 g
last modified: 13.10.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue