6GK5788-2ST00-2AB6 SCALANCE W788-2PRO (USA)

6GK5788-2ST00-2AB6 SCALANCE W788-2PRO (USA)

Product Code: 6GK5788-2ST00-2AB6

Availability: In Stock

Price: $883.65
Qty:
Add to Wish List
Add to Compare
Artikelnummer 6GK5788-2ST00-2AB6
Product type designation SCALANCE W788-2PRO
Product description
IWLAN DUAL ACCESS POINT SCALANCE W788-2PRO, ONLY FOR USE IN USA, 2 RADIO INTERFACES, IEEE 802.11B/G/A/H, INDUSTRIAL WIRELESS LAN (IWLAN) 2.4/5 GHZ, UP TO 54 MBIT/S, WPA2/802.11I/11E, NOTE NATIONAL APPROVAL, POE, IP65 (-20-+60 DGR C), EN50155, SCOPE OF SUPPLY:2X ANT 795-4MR, IP67 HYBRID PLUG CONNECTOR, MOUNTING ACCESSORIES, MANUALS ON CD-ROM GER/ENG;
Transmission rate
Transfer rate
● with WLAN / maximum 54 Mbit/s
● for Industrial Ethernet 10 Mbit/s, 100 Mbit/s
● Note Due to the simultaneous use of several radio channels, a transmission rate of 108 Mbit/s is possible (turbo mode)
Interfaces
Number of electrical connections
● for network components or terminal equipment 1
● for power supply 1
● for redundant voltage supply 1
Design of the electrical connection
● for network components or terminal equipment Hybrid socket, RJ45 integrated
● for power supply M12 interface (4-pole, A-coded), hybrid socket, PoE
design of the removable storage
● C-PLUG Yes
● KEY-PLUG No
Interfaces / wireless
Number of radio cards / permanently installed 2
Number of electrical connections / for external antenna(s) 4
Design of the electrical connection / for external antenna(s) R-SMA (socket)
Product property / external antenna can be mounted directly on device Yes
Supply voltage, current consumption, power loss
Type of voltage / of the supply voltage DC
Supply voltage / 1
● from M12 Power Connector (A-coded) for redundant power supply 24 V
● from IE Hybrid Cable 2x2 + 4x0.34 24 V
Supply voltage / 2
● from M12 Power Connector (A-coded) for redundant power supply 48 V
● from IE Hybrid Cable 2x2 + 4x0.34 48 V
Supply voltage
● from Power-over-Ethernet acc. to IEEE802.3at for type 1 and IEEE802.3af 48 V
Permitted ambient conditions
Ambient temperature
● during operation -20 ... +60 °C
● during storage -40 ... +70 °C
● during transport -40 ... +70 °C
Relative humidity / at 25 °C / without condensation / during operation / maximum 100 %
Ambient condition / for operation When used under hazardous conditions (Zone 2), the SCALANCE W788-xPRO/RR or W74x-1PRO/RR product must be installed in an enclosure. To comply with EN 50021, this enclosure must meet the requirements of at least IP 54 in compliance with EN 60529.
Protection class IP IP65
Design, dimensions and weight
Width / of the enclosure / without antenna 125 mm
Height / of the enclosure / without antenna 88 mm
Depth / of the enclosure / without antenna 108 mm
Net weight 1.05 kg
Mounting type
● S7-300 rail mounting Yes
● S7-1500 rail mounting No
● wall mounting Yes
Wireless frequencies
Radio frequency
● for WLAN in 2.4 GHz frequency band 2.41 ... 2.48 GHz
● for WLAN in 5 GHz frequency band 4.9 ... 5.8 GHz
Product properties, functions, components / general
Product function / Access Point Mode Yes
Product function / Client Mode Yes
Number of SSIDs 16
Product function
● Dual Client No
● iHOP No
● iPCF Access Point No
● iPCF client No
● iPCF-MC Access Point No
● iPCF-MC client No
Number of iPCF-capable radio modules 0
Product functions / management, configuration
Number of manageable IP addresses / in client 8
Product function
● CLI Yes
● web-based management Yes
● MIB support Yes
● TRAPs via email Yes
● Configuration with STEP 7 No
● configuration with STEP 7 in the TIA Portal No
● operation with IWLAN controller No
● operation with Enterasys WLAN controller No
● iQoS Yes
● forced roaming with IWLAN Yes
● WDS Yes
Protocol / is supported
● Address Resolution Protocol (ARP) Yes
● ICMP Yes
● Telnet Yes
● HTTP Yes
● HTTPS Yes
● TFTP Yes
● DCP Yes
● LLDP No
Identification & maintenance function
● I&M0 - device-specific information No
● I&M1 – higher-level designation/location designation No
Product functions / Diagnosis
Product function
● PROFINET IO diagnosis Yes
● Link Check Yes
● connection monitoring IP-Alive Yes
● localization via Aeroscout No
● SysLog Yes
Protocol / is supported
● SNMP v1 Yes
● SNMP v2 Yes
● SNMP v3 Yes
Product functions / VLAN
Product function
● function VLAN with IWLAN No
Product functions / DHCP
Product function
● DHCP client Yes
● in Client Mode / DHCP server via LAN Yes
Product functions / Redundancy
Protocol / is supported
● STP/RSTP Yes
Product functions / Security
Product function
● ACL - MAC-based Yes
● Management security, ACL-IP based No
● IEEE 802.1x (radius) Yes
● NAT/NAPT Yes
● access protection according to IEEE802.11i Yes
● WPA/WPA2 Yes
● TKIP/AES Yes
Protocol / is supported
● SSH Yes
Product functions / Time
Protocol / is supported
● SNTP Yes
● SIMATIC Time No
Standards, specifications, approvals
Standard
● for FM FM 3611: Class I, Division 2, Groups A,B,C,D, T4 / Class 1, Zone 2, Group IIC, T4
● for hazardous zone EN 60079-15:2005, EN 60079-0:2006, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
● for safety / from CSA and UL UL 60950-1 CSA C22.2 No. 60950-1
● for hazardous zone / from CSA and UL ISA 12.12.01-2000, CSA C22.2 No. 213-M1987, CL. 1, Div. 2, GP. A,B,C,D, T4 / CL. 1, Zone 2, GP IIC, T4 / CL. 1, Zone 2, AEx nC IIC, T4
Certificate of suitability
● EC declaration of conformity Yes
● CE marking Yes
● C-Tick Yes
● E1 approval No
● Railway application in accordance with EN 50155 No
● NEMA4X No
● Power-over-Ethernet according IEEE802.3at for type 1 and IEEE802.3af Yes
Standard for wireless communication
● IEEE 802.11a Yes
● IEEE 802.11b Yes
● IEEE 802.11e Yes
● IEEE 802.11g Yes
● IEEE 802.11h Yes
● IEEE 802.11i Yes
● IEEE 802.11n No
Wireless approval For operation in the USA, you can find more detailed information at: www.siemens.com/simatic-net/ik-info
Accessories
accessories 2 antennas, hybrid connector included in scope of delivery
Further Information / Internet Links
Internet-Link
● to website: TIA Selection Tool http://www.siemens.com/tia-selection-tool
● to the website: IWLAN http://www.siemens.com/iwlan
● to website: Industry Mall https://mall.industry.siemens.com
● to website: Information and Download Center http://www.siemens.com/automation/net/catalog
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx Download Manager http://www.siemens.com/cax
● to website: Industry Online Support http://support.automation.siemens.com
Security information
Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4)
last modified: 04.11.2014
Date
07.11.2014		 Changes preserved
© Copyright Siemens AG 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue