- |
SIMATIC S7-400, FM 452 ELECTRONIC CAM CONTROLLER INCL. CONFIG. PACKAGE ON CD |
|
Supply voltage |
24 V DC |
Yes |
Input current |
Current consumption, max. |
500 mA |
Encoder supply |
5 V encoder supply |
5 V |
Yes |
Output current, max. |
300 mA |
Cable length, max. |
32 m |
24 V encoder supply |
24 V |
Yes |
Output current, max. |
300 mA |
Cable length, max. |
100 m |
Digital inputs |
Number of digital inputs |
11 |
Functions |
Reference point switch, flying actual value setting/length measurement, brake release, enable track output no. 3 to 10 |
Input voltage |
Rated value, DC |
24 V |
for signal "0" |
-28,8 bis +5 V |
for signal "1" |
11 to 28.8 V |
Input current |
for signal "0", max. (permissible quiescent current) |
2 mA |
for 2-wire sensor |
for signal "1", typ. |
9 mA |
Digital outputs |
Number of digital outputs |
16 |
Functions |
Cam track |
Short-circuit protection |
Yes |
Output voltage |
Rated value (DC) |
24 V |
for signal "1", min. |
UP - 0.8 V |
Output current |
for signal "1" permissible range for 0 to 55 °C, max. |
600 mA; with UPmax |
for signal "0" residual current, max. |
0.5 mA |
Encoder |
Connectable encoders |
Incremental encoder (symmetrical) |
Yes |
Incremental encoder (asymmetrical) |
Yes |
Absolute encoder (SSI) |
Yes |
2-wire sensor |
Yes |
Encoder signals, incremental encoder (symmetrical) |
Trace mark signals |
A, notA, B, notB |
Zero mark signal |
N, notN |
Input signal |
5 V difference signal (phys. RS 422) |
Input frequency, max. |
1 MHz |
Encoder signals, incremental encoder (asymmetrical) |
Trace mark signals |
A, B |
Zero mark signal |
N |
Input voltage |
24 V |
Input frequency, max. |
50 kHz; 50 kHz for 25 m cable length; 25 kHz for 100 m cable length |
Encoder signals, absolute encoder (SSI) |
Input signal |
5 V difference signal (phys. RS 422) |
Data signal |
DATA, notDATA |
Clock signal |
CL, notCL |
Message frame length, parameterizable |
13 or 25 bit serial |
Clock frequency, max. |
1 MHz |
Gray code |
1 |
Cable length, shielded, max. |
300 m; at max. 125 kHz |
Galvanic isolation |
Galvanic isolation digital inputs |
Galvanic isolation digital inputs |
No |
Galvanic isolation digital outputs |
Galvanic isolation digital outputs |
No |
Degree and class of protection |
IP20 |
Yes |
Ambient conditions |
Operating temperature |
Min. |
0 °C |
max. |
55 °C |
Storage/transport temperature |
Min. |
-40 °C |
max. |
70 °C |
Relative humidity |
Humidity class F |
Yes |
Connection method |
required front connector |
1x 48-pin |
Dimensions |
Width |
25 mm |
Height |
290 mm |
Depth |
210 mm |
Weights |
Weight, approx. |
650 g |
Status |
Jun 16, 2014 |
|