6ES7350-1AH03-0AE0 SIMATIC S7-300, COUNTER MODULE

0 reviews | Write a review

Product Code: 6ES7350-1AH03-0AE0

Availability: In Stock

Price: $250.71

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7350-1AH03-0AE0


Supply voltage
Aux. voltage 1L+, load voltage 2L+
● Rated value (DC)		24 V
Permissible range (ripple included)
— dynamic, lower limit (DC)		18.5 V
— dynamic, upper limit (DC)		30.2 V
— static, lower limit (DC)		20.4 V
— static, upper limit (DC)		28.8 V
non-periodic skip
— Duration		500 ms
— Recovery time		50 s
— Value		35 V
Input current
from load voltage 1L+ (without load), max.		40 mA
from backplane bus 5 V DC, max.		160 mA
Encoder supply
5 V encoder supply
● 5 V		Yes; 5.2 V +/-2%
● Output current, max.		300 mA
24 V encoder supply
● 24 V		Yes; 1L+ (-3 V)
● Output current, max.		400 mA
Power losses
Power loss, typ.		4.5 W
Digital inputs
Number of digital inputs		3
Functions		1 for gate start, 1 for gate stop, 1 for setting the counter
Input voltage
● for signal "0"		-28,8 ... +5 V
● for signal "1"		+11 to +28.8 V
Input current
● for signal "1", typ.		9 mA
Digital outputs
Number of digital outputs		2
short-circuit protection		Yes; Clocked electronically
Limitation of inductive shutdown voltage to		2L+ (-39 V)
Output voltage
● for signal "0", max.		3 V
● for signal "1", min.		2L+ (-1,5 V)
Output current
● for signal "1" rated value		0.5 A
● for signal "1" permissible range for 0 to 60 °C, min.		5 mA
● for signal "1" permissible range for 0 to 60 °C, max.		0.6 A
Output delay with resistive load
● "0" to "1", max.		300 µs
Encoder
Connectable encoders
● Incremental encoder (symmetrical)		Yes; With 2 pulse trains offset by 90°
● Incremental encoder (asymmetrical)		Yes
● 24 V initiator		Yes
● 24 V directional element		Yes; 1 pulse train, 1 direction level
Counter
Number of counter inputs		1
Counting range, description		32 bit or +/-31 bit
Minimum pulse width, adjustable		Yes; 2.5 or 25 µs
Counter input 5 V
● Type		RS 422
● Terminating resistor		220 Ω
● Differential input voltage		1,3 V
● Counting frequency, max.		500 kHz
Counter input 24 V
● Input voltage, for signal "0"		-28,8 ... +5 V
● Input voltage, for signal "1"		+11 to +28.8 V
● Input current, for signal "1", typ.		9 mA
● Counting frequency, max.		200 kHz
● Minimum pulse width		2.5 µs
Parameter
Remark		assigned binary addresses: 16 bytes
Galvanic isolation
Galvanic isolation digital inputs
● between the channels and the backplane bus		Yes; Optocoupler
Galvanic isolation digital outputs
● between the channels and the backplane bus		Yes; Optocoupler
Galvanic isolation counter
● between the channels and the backplane bus		Yes; Optocoupler
Permissible potential difference
between different circuits		75 VDC / 60 VAC
Isolation
Isolation checked with		500 V
Connection method
required front connector		1x 20-pin
Dimensions
Width		40 mm
Height		125 mm
Depth		120 mm
Weights
Weight, approx.		250 g
last modified:		25.09.2014