6ES7223-1HF22-0XA0 SIMATIC S7-200, DIGITAL I/O

6ES7223-1HF22-0XA0 SIMATIC S7-200, DIGITAL I/O

Product Code: 6ES7223-1HF22-0XA0

Availability: In Stock

Price: $69.87
Qty:
Add to Wish List
Add to Compare
  
 
EM 223 digital input/output module

-
SIMATIC S7-200, DIGITAL I/O EM 223, FOR S7-22X CPU ONLY, 4 DI / 4 DO RELAY, 5-30 V DC, 250 V AC
Supply voltage
Load voltage L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 5 V
permissible range, upper limit (DC) 30 V
Load voltage L1
Rated value (AC) 230 V; 24 V AC to 230 V AC
permissible range, lower limit (AC) 5 V
permissible range, upper limit (AC) 250 V
Input current
from backplane bus 5 V DC, max. 40 mA
from coil current, max. 9 mA; for each output on signal "1"
from sensor current supply or external current supply (24 V DC), max. 72 mA
Power losses
Power loss, typ. 2 W
Digital inputs
Number of digital inputs 4
Input voltage
Type of input voltage AC/DC
Rated value, DC 24 V
for signal "0" 0 to 5 V
for signal "1" 15 to 30 VDC
Input current
for signal "1", typ. 4 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", max. 4.5 ms
Digital outputs
Number of digital outputs 4; Relays
Short-circuit protection No
Output voltage
for signal "0", max. 0.1 V; with 10 kOhm load
for signal "1", min. L+/L1
Output current
for signal "1" rated value 2000 mA
Aggregate current of outputs (per group)
all mounting positions
maximum current per conductor/group 8 A
Relay outputs
Number of operating cycles, max. 10000000; mechanically 10 million, at rated load voltage 100,000
Switching capacity of contacts
with inductive load, max. 0.75 A; per output
on lamp load, max. 200 W; 30 W with DC, 200 W with AC
with resistive load, max. 0.75 A; per output
Cable length
Cable length, shielded, max. 500 m
Cable length unshielded, max. 150 m
Encoder
Connectable encoders
2-wire sensor Yes
Permissible quiescent current (2-wire sensor), max. 1 mA
Galvanic isolation
Galvanic isolation digital inputs
Galvanic isolation digital inputs Yes; Optocoupler
between the channels, in groups of 4
Galvanic isolation digital outputs
Galvanic isolation digital outputs Yes; Relays
between the channels, in groups of 4
Isolation
Isolation checked with 500 V AC
Connection method
Plug-in I/O terminals Yes
Dimensions
Width 46 mm
Height 80 mm
Depth 62 mm
Weights
Weight, approx. 160 g
Status Jun 6, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue