6ES7222-1HF30-0XB0 DIGITAL OUTPUT SM 1222, 8 DO, RELAY

6ES7222-1HF30-0XB0 DIGITAL OUTPUT SM 1222, 8 DO, RELAY

Product Code: 6ES7222-1HF30-0XB0

Availability: In Stock

Price: $58.23
Qty:
Add to Wish List
Add to Compare
  
 
SM 1222 RLY

-
SIMATIC S7-1200, DIGITAL OUTPUT SM 1222, 8 DO, RELAY 2A
Supply voltage
permissible range, lower limit (DC) 5 V
permissible range, upper limit (DC) 30 V
Input current
from backplane bus 5 V DC, max. 120 mA
Digital inputs
from load voltage L+ (without load), max. 11 mA/relay coil
Power loss
Power loss, typ. 4.5 W
Digital inputs
Number of digital inputs 0
Digital outputs
Number of digital outputs 8
in groups of 2
Short-circuit protection No; to be provided externally
Switching capacity of the outputs
with resistive load, max. 2 A
on lamp load, max. 30 W with DC, 200 W with AC
Output voltage
Rated value (AC) 5 V AC to 250 V AC
Rated value (DC) 5 V DC to 30 V DC
Output current
for signal "1" permissible range, max. 2 A
Output delay with resistive load
"0" to "1", max. 10 ms
"1" to "0", max. 10 ms
Total current of the outputs (per group)
horizontal installation
up to 50 °C, max. 10 A; Current per mass
Relay outputs
Number of relay outputs 8
Rated supply voltage of relay coil L+ (DC) 24 V
Number of operating cycles, max. mechanically 10 million, at rated load voltage 100,000
Switching capacity of contacts
with inductive load, max. 2 A
on lamp load, max. 30 W with DC, 200 W with AC
with resistive load, max. 2 A
Cable length
Cable length, shielded, max. 500 m
Cable length unshielded, max. 150 m
Interrupts/diagnostics/status information
Alarms
Alarms Yes
Diagnostic alarm Yes
Diagnostic messages
Diagnostic functions Yes
Diagnostics indication LED
for status of the outputs Yes
for maintenance Yes
Status indicator digital output (green) Yes
Galvanic isolation
Galvanic isolation digital outputs
between the channels Relays
between the channels, in groups of 2
between the channels and the backplane bus 1500 V AC for 1 minute
Permissible potential difference
between different circuits 750 V AC for 1 minute
Degree and class of protection
IP20 Yes
Standards, approvals, certificates
CE mark Yes
RCM (former C-TICK) Yes
FM approval Yes
Climatic and mechanical conditions for storage and transport
Climatic conditions for storage and transport
Free fall
Drop height, max. (in packaging) 0.3 m; five times, in dispatch package
Temperature
permissible temperature range -40 °C to +70 °C
Air pressure acc. to IEC 60068-2-13
permissible air pressure 1080 to 660 hPa
Relative humidity
permissible range (without condensation) at 25 °C 95 %
Mechanical and climatic conditions during operation
Climatic conditions in operation
Temperature
permissible temperature range 0 °C to 55 °C horizontal installation, 0 °C to 45 °C vertical installation
permissible temperature change 5°C to 55°C, 3°C / minute
Connection method
required front connector Yes
Mechanics/material
Type of housing (front)
Plastic Yes
Dimensions
Width 45 mm
Height 100 mm
Depth 75 mm
Weights
Weight, approx. 190 g
Status Aug 25, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue