6ES7154-4AB10-0AB0 ET200PRO, IM 154-4 PN HF

0 reviews | Write a review

Product Code: 6ES7154-4AB10-0AB0

Availability: In Stock

Price: $260.30

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7154-4AB10-0AB0

		SIMATIC DP, PROFINET INTERFACE MODULE IM154-4 PN, HIGH FEATURE FOR ET 200PRO, INTEGRATED SWITCH, INCLUSIVE TERMINATING MODULE, CONNECTING MODULE IM PN 6ES7194-4A.00-0AA0 MUST BE ORDERED SEPARATELY
General information
Vendor identification (VendorID)		0x002A
Device identifier (DeviceID)		0x0305
Supply voltage
24 V DC		Yes
permissible range, lower limit (DC)		20.4 V; Unit [V]
permissible range, upper limit (DC)		28.8 V; Unit [V]
Load voltage 1L+
● Rated value (DC)		24 V
● short-circuit protection		Yes; Fuse in lower part is exchangeable, the fuse on the IM-LP is not
● Reverse polarity protection		Yes; against destruction
Input current
from supply voltage 1L+, max.		400 mA; Dependent on terminal module, typ. maximum value for FO connection method, full load on RWB and 20.4 V input voltage
Power losses
Power loss, typ.		6 W; Dependent on terminal module, typ. maximum value for CU connection method, full load on RWB, for FO the value is approx. 0.7 W higher
Memory
Micro Memory Card		No; Internal memory medium
Address area
Addressing volume
● Inputs		256 byte
● Outputs		256 byte
Interfaces
PROFINET IO
● Automatic detection of transmission speed		Yes
● Transmission rate, max.		100 Mbit/s
● Services		ARP, PING, SNMP
Protocols
PROFINET IO		Yes
Interrupts/diagnostics/status information
Diagnostics indication LED
● Bus fault BF (red)		Yes; Additional LEDs (MAINT, P1/2 LINK, P1/2 RX/TX) available
● Group error SF (red)		Yes
● Monitoring 24 V voltage supply ON (green)		Yes
● Load voltage monitoring DC 24 V (green)		Yes
Parameter
Diagnostic alarm		1
Hardware interrupt		1
Swapping interrupt		1
identifier-related diagnostic data		1
Module status		1
Channel-related diagnostics		1
Startup if setpoint not equal to actual configuration		1
Hot swapping of modules		1
Galvanic isolation
between backplane bus and electronics		No
Isolation
Isolation checked with		500 V DC
Degree and class of protection
IP65		Yes
IP66		Yes
IP67		Yes
Ambient conditions
Operating temperature
● Min.		-25 °C
● max.		55 °C
Storage/transport temperature
● Min.		-40 °C
● max.		70 °C
Dimensions
Width		135 mm
Height		130 mm
Depth		59.3 mm
Weights
Weight, approx.		490 g
last modified:		08.09.2014