6ES7143-3BH10-0XA0 ET200ECO, BM143, 8DI/8DA, 1.3A

6ES7143-3BH10-0XA0 ET200ECO, BM143, 8DI/8DA, 1.3A

Product Code: 6ES7143-3BH10-0XA0

Availability: In Stock

Price: $132.55
Qty:
Add to Wish List
Add to Compare
  
 
Artikelnummer 6ES7143-3BH10-0XA0
Supply voltage
Load voltage 1L+
● Rated value (DC) 24 V
● Reverse polarity protection Yes
Load voltage 2L+
● Rated value (DC) 24 V
● Reverse polarity protection Yes
Input current
from load voltage 2L+ (without load), max. 60 mA
from supply voltage 1L+, max. 70 mA
Encoder supply
Number of outputs 8
short-circuit protection Yes
Output current
● Rated value 1 A
Power losses
Power loss, typ. 5 W
Digital inputs
Number of digital inputs 8
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Number of simultaneously controllable inputs
● Number of simultaneously controllable inputs 8
Input voltage
● Rated value, DC 24 V
Input current
● for signal "1", typ. 7 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max. 3 ms
— at "1" to "0", max. 3 ms
Digital outputs
Number of digital outputs 8
short-circuit protection Yes
Controlling a digital input Yes
Switching capacity of the outputs
● Lamp load, max. 10 W
Load resistance range
● lower limit 12 Ω
● upper limit 4 kΩ
Output current
● for signal "1" rated value 1.3 A
● for signal "1" permissible range for 0 to 55 °C, min. 5 mA
● for signal "1" permissible range for 0 to 55 °C, max. 1.8 A
● for signal "0" residual current, max. 0.5 mA
Parallel switching of 2 outputs
● for increased power No
● for redundant control of a load Yes
Switching frequency
● with resistive load, max. 100 Hz
● with inductive load, max. 0.5 Hz
● on lamp load, max. 1 Hz
Aggregate current of outputs (per group)
all mounting positions
— up to 55 °C, max. 5.2 A
Cable length
● Cable length unshielded, max. 30 m
Encoder
Connectable encoders
● 2-wire sensor Yes
— Permissible quiescent current (2-wire sensor), max. 1.5 mA
Interfaces
PROFIBUS DP
● Transmission rate, max. 12 Mbit/s
Protocols
PROFIBUS DP Yes
Interrupts/diagnostics/status information
Status indicator Yes
Alarms
● Alarms No
Diagnostic messages
● Diagnostics Yes
Diagnostics indication LED
● Group error SF (red) Yes
● Status indicator digital output (green) Yes
● Status indicator digital input (green) Yes
● Channel error indicator F (red) No
Galvanic isolation
between PROFIBUS DP and all other circuit components Yes
Galvanic isolation digital inputs
● between the channels No
Galvanic isolation digital outputs
● between the channels No
Dimensions
Width 60 mm
Height 210 mm
Depth 28 mm
Weights
Weight, approx. 210 g
last modified: 16.09.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue
Fatal Error: Can't alloc dataspace in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617 Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12 Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14 Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16 Warning: alloc datasize:976632435 in /www/wwwroot/www.kollewin.com/system/secache/secache.php on line 617 Warning: fopen(/www/wwwroot/www.kollewin.com/system/logs/error.txt): failed to open stream: Permission denied in /www/wwwroot/www.kollewin.com/system/library/log.php on line 12 Warning: fwrite() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 14 Warning: fclose() expects parameter 1 to be resource, boolean given in /www/wwwroot/www.kollewin.com/system/library/log.php on line 16