6ES7143-3BH10-0XA0 ET200ECO, BM143, 8DI/8DA, 1.3A

0 reviews | Write a review

Product Code: 6ES7143-3BH10-0XA0

Availability: In Stock

Price: $132.55

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7143-3BH10-0XA0


Supply voltage
Load voltage 1L+
● Rated value (DC)		24 V
● Reverse polarity protection		Yes
Load voltage 2L+
● Rated value (DC)		24 V
● Reverse polarity protection		Yes
Input current
from load voltage 2L+ (without load), max.		60 mA
from supply voltage 1L+, max.		70 mA
Encoder supply
Number of outputs		8
short-circuit protection		Yes
Output current
● Rated value		1 A
Power losses
Power loss, typ.		5 W
Digital inputs
Number of digital inputs		8
Input characteristic curve in accordance with IEC 61131, type 1		Yes
Number of simultaneously controllable inputs
● Number of simultaneously controllable inputs		8
Input voltage
● Rated value, DC		24 V
Input current
● for signal "1", typ.		7 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max.		3 ms
— at "1" to "0", max.		3 ms
Digital outputs
Number of digital outputs		8
short-circuit protection		Yes
Controlling a digital input		Yes
Switching capacity of the outputs
● Lamp load, max.		10 W
Load resistance range
● lower limit		12 Ω
● upper limit		4 kΩ
Output current
● for signal "1" rated value		1.3 A
● for signal "1" permissible range for 0 to 55 °C, min.		5 mA
● for signal "1" permissible range for 0 to 55 °C, max.		1.8 A
● for signal "0" residual current, max.		0.5 mA
Parallel switching of 2 outputs
● for increased power		No
● for redundant control of a load		Yes
Switching frequency
● with resistive load, max.		100 Hz
● with inductive load, max.		0.5 Hz
● on lamp load, max.		1 Hz
Aggregate current of outputs (per group)
all mounting positions
— up to 55 °C, max.		5.2 A
Cable length
● Cable length unshielded, max.		30 m
Encoder
Connectable encoders
● 2-wire sensor		Yes
— Permissible quiescent current (2-wire sensor), max.		1.5 mA
Interfaces
PROFIBUS DP
● Transmission rate, max.		12 Mbit/s
Protocols
PROFIBUS DP		Yes
Interrupts/diagnostics/status information
Status indicator		Yes
Alarms
● Alarms		No
Diagnostic messages
● Diagnostics		Yes
Diagnostics indication LED
● Group error SF (red)		Yes
● Status indicator digital output (green)		Yes
● Status indicator digital input (green)		Yes
● Channel error indicator F (red)		No
Galvanic isolation
between PROFIBUS DP and all other circuit components		Yes
Galvanic isolation digital inputs
● between the channels		No
Galvanic isolation digital outputs
● between the channels		No
Dimensions
Width		60 mm
Height		210 mm
Depth		28 mm
Weights
Weight, approx.		210 g
last modified:		16.09.2014