6ES7143-1BF00-0XB0 ET200X, BM143/DESINA, 8DI/DO

6ES7143-1BF00-0XB0 ET200X, BM143/DESINA, 8DI/DO

Product Code: 6ES7143-1BF00-0XB0

Availability: In Stock

Price: $432.92
Qty:
Add to Wish List
Add to Compare
  
 
Basic module BM 143/DESINA

-
SIMATIC DP, DISTRIBUTED I/O ET200X:BASICMODULE BM143/DESINA 8 DI/DO CONFIGURABLE, ADD. DIAG-INPUTS, HYBRID FIELD BUS INTERF. (FO), IDENT CONNECTOR, IP67
Supply voltage
Load voltage 1L+
Rated value (DC) 24 V
Reverse polarity protection No
Load voltage 2L+
Rated value (DC) 24 V
Reverse polarity protection No
Input current
from load voltage 1L+ (unswitched voltage) 180 mA
from load circuit 1 (unswitched voltage/supply voltage) up to 40 °C 10 A
from load circuit 1 (unswitched voltage/supply voltage) up to 55 °C 8 A
from load circuit 2 (unswitched voltage/supply voltage) up to 40 °C 10 A
from load circuit 2 (unswitched voltage/supply voltage) up to 55 °C 8 A
Power losses
Power loss, typ. 3.5 W
Hardware configuration
Expansion modules
Number of expansion modules, max. 7
of which motor starters/frequency converters, max. 6
of which, pneumatic interfaces, max. 6
Digital inputs
Number of digital inputs 8; 8 process channels, parameterization as DI/DO; 8 function channels, parameter assignment as diagnostics/NC input
Input characteristic curve in accordance with IEC 61131, type 2 Yes
Number of simultaneously controllable inputs
all mounting positions
up to 60 °C, max. 8
Input voltage
Rated value, DC 24 V; Input voltage for parameterized DI (Pin 4): Rated value 24 VDC, for signal "1": 13 to 30 V, for signal "0": -30 to +5 V: Input voltage for input functionality (Pin 2): Rated value 24 VDC, for signal "1": 13 to 30 VDC, for signal "0": -30 to +2 V
for signal "0" -3 to +5 V
for signal "1" 13 to 30 V
Input current
for signal "1", typ. 5 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", min. 1.2 ms
at "0" to "1", max. 4.8 ms
Cable length
Cable length unshielded, max. 30 m
Digital outputs
Number of digital outputs 8; 8 process channels, parameterization as DI/DO; 8 function channels, parameter assignment as diagnostics/NC input
Short-circuit protection Yes; Electronic
Response threshold, typ. 1,8 A
Switching capacity of the outputs
Lamp load, max. 10 W
Output current
for signal "1" rated value 1.2 A
for signal "1" permissible range for 0 to 60 °C, min. 5 mA
for signal "1" permissible range for 0 to 60 °C, max. 1.3 A
for signal "0" residual current, max. 0.5 mA
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 2 Hz
on lamp load, max. 1 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 60 °C, max. Simultaneity factor 50%
Cable length
Cable length unshielded, max. 30 m
Encoder
Connectable encoders
2-wire sensor Yes
Permissible quiescent current (2-wire sensor), max. 1.5 mA
1st interface
Functionality
DP slave Yes
DP slave
Transmission rate, min. 9.6 kbit/s
Transmission rate, max. 12 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 12 Mbit/s
Services
Direct data exchange (slave-to-slave communication) Yes; Sender
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes
Diagnostic messages
Diagnostics Yes; complying with DESINA
Diagnostics indication LED
Group error SF (red) Yes
Galvanic isolation
Galvanic isolation No electrical isolation between the load voltages and between the load voltages and all the other circuit components
between PROFIBUS DP and all other circuit components Yes
Galvanic isolation digital inputs
between the channels No
between the channels and the backplane bus No
Degree and class of protection
IP67 Yes
Dimensions
Width 175 mm; 180 when screw mounted
Height 180 mm; 174 when screw mounted
Depth 110 mm; 90 when screw mounted
Status May 23, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue