6ES7142-6BG00-0AB0 ET200ECO PN, 8DO, DC24V/1,3A, 8XM12

6ES7142-6BG00-0AB0 ET200ECO PN, 8DO, DC24V/1,3A, 8XM12

Product Code: 6ES7142-6BG00-0AB0

Availability: In Stock

Price: $218.52
Qty:
Add to Wish List
Add to Compare
  
 
ET 200eco PN, 16DO

-
SIMATIC DP, ET 200ECO PN, 8 DO 24V DC/1,3A; 8 X M12, DEGREE OF PROTECTION IP67
General information
Vendor identification (VendorID) 002AH
Device identifier (DeviceID) 0306H
Supply voltage
Load voltage 1L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Load voltage 2L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
from load voltage 1L+ (unswitched voltage) 4 A
from load voltage 2L+, max. 4 A
Power losses
Power loss, typ. 5.5 W
Digital outputs
Number of digital outputs 8
In groups of 4
Short-circuit protection Yes
Response threshold, typ. 1,8 A
Limitation of inductive shutdown voltage to Typ. (L1+, L2+) -47 V
Controlling a digital input Yes
Switching capacity of the outputs
on lamp load, max. 5 W
Output current
for signal "1" rated value 1.3 A; Maximum
for signal "0" residual current, max. 1.5 mA
Parallel switching of 2 outputs
for increased power No
for redundant control of a load Yes
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 0.5 Hz
on lamp load, max. 1 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 60 °C, max. 3.9 A
Cable length
Cable length unshielded, max. 30 m
Interfaces
Transmission procedure 100BASE-TX
Transmission rate, max. 100 Mbit/s
Supports protocol for PROFINET IO
Number of PROFINET interfaces 1
Autocrossing Yes
Automatic detection of transmission speed Yes
Integrated switch Yes
PROFINET IO Device
IRT with the option "high flexibility" supported Yes
Prioritized startup Yes
Protocols
Supports protocol for PROFINET IO Yes
PROFINET CBA No
Supports protocol for PROFIsafe No
Protocols (Ethernet)
SNMP Yes
DCP Yes
LLDP Yes
ping Yes
ARP Yes
Interrupts/diagnostics/status information
Status indicator Yes; Green LED
Alarms
Diagnostic alarm Yes
Diagnostic messages
Diagnostic functions Yes
Diagnostic information readable Yes
Monitoring the supply voltage Yes; Green "ON" LED
Wire break in actuator cable Yes
Short circuit Yes
Group error Yes; Red/yellow "SF/MT" LED
Galvanic isolation
between the load voltages Yes
between load voltage and all other switching components No
between Ethernet and electronics Yes
Galvanic isolation digital outputs
between the channels No
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
tested with
24 V DC circuits 500 V
Interface 1500 V; According to IEEE 802.3
Degree and class of protection
IP65 Yes
IP66 Yes
IP67 Yes
Connection method
M12 Yes
Dimensions
Width 60 mm
Height 175 mm
Depth 49 mm
Weights
Weight (without packaging) 910 g
Status Jun 6, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue