6ES7143-1BF30-0XB0 ET200X, BM143/DESINA, 8DI/DO

6ES7143-1BF30-0XB0 ET200X, BM143/DESINA, 8DI/DO

Product Code: 6ES7143-1BF30-0XB0

Availability: In Stock

Price: $210.30
Qty:
Add to Wish List
Add to Compare
  
 
Digital expansion module EM 143/DESINA

-
SIMATIC DP, DISTRIBUTED I/O ET200X:EXT.MODULE BM143/DESINA 8DI/DO CONFIGURABLE,ADD.DIAG- INPUTS, IP67
Input current
from backplane bus 5 V DC, max. 40 mA
Encoder supply
Output current
up to 40 °C, max. 1 A
up to 55 °C, max. 0.8 A
Power losses
Power loss, typ. 1.5 W
Digital inputs
Number of digital inputs 8; 8 function inputs (diagnostic inputs or inputs with opener function)
Input characteristic curve in accordance with IEC 61131, type 2 Yes
Number of simultaneously controllable inputs 8
Input voltage
Rated value, DC 24 V; Input voltage for parameterized DI (Pin 4) / Input voltage for function input (Pin 2)
for signal "0" -30 to +5 V
for signal "1" 13 to 30 V
Input current
for signal "1", typ. 5 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", min. 1.2 ms
at "0" to "1", max. 4.8 ms
Cable length
Cable length unshielded, max. 30 m; for signal lines
Digital outputs
Number of digital outputs 8; 8 process channels, parameterization as DI/DO; 8 function channels, parameter assignment as diagnostics/NC input
Short-circuit protection Yes; Electronic
Response threshold, typ. 1,8 A
Output current
for signal "1" rated value 1.2 A
for signal "1" permissible range for 0 to 60 °C, min. 5 mA
for signal "1" permissible range for 0 to 60 °C, max. 1.3 A
for signal "0" residual current, max. 0.5 mA
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 2 Hz
on lamp load, max. 1 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 60 °C, max. 50 %
Cable length
Cable length unshielded, max. 30 m; for signal lines
Encoder
Connectable encoders
2-wire sensor Yes
Permissible quiescent current (2-wire sensor), max. 1.5 mA
Interrupts/diagnostics/status information
Diagnostics indication LED
Status indicator per channel (yellow) Yes
Indicator function input per channel (yellow/red) Yes
Galvanic isolation
Galvanic isolation digital inputs
between the channels and the backplane bus No
Galvanic isolation digital outputs
between the channels and the backplane bus No
Dimensions
Width 87 mm; Width module 60 mm
Height 180 mm
Depth 55 mm
Status Jun 16, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue