6ES7141-1BF00-0AB0 SIMATIC DP, DISTRIBUTED I/O

Product Code: 6ES7141-1BF00-0AB0

Availability: In Stock

Price: $444.57
Qty:
Add to Wish List
Add to Compare
  
 
SIMATIC DP, DISTRIBUTED I/O ET200X:BASIC MOD. BM141/ECOFAST 8 DE DC 24V, 5-PIN M12, WITH SINGLE-CHANNEL PORT, HYBRID FIELD BUS INTERFACE (RS485), IDENT CONNECTOR, IP67 IDENT CONNECTOR, IP67
Supply voltage
Load voltage 1L+
Rated value (DC) 24 V
Reverse polarity protection No
Load voltage 2L+
Rated value (DC) 24 V
Reverse polarity protection No
Input current
from load voltage 1L+ (unswitched voltage) 180 mA
from load circuit 1 (unswitched voltage/supply voltage) up to 40 °C 10 A
from load circuit 1 (unswitched voltage/supply voltage) up to 55 °C 8 A
from load circuit 2 (unswitched voltage/supply voltage) up to 40 °C 10 A
from load circuit 2 (unswitched voltage/supply voltage) up to 55 °C 8 A
Power losses
Power loss, typ. 3.5 W
Hardware configuration
Expansion modules
Number of expansion modules, max. 7
of which motor starters/frequency converters, max. 6
of which, pneumatic interfaces, max. 6
Digital inputs
Number of digital inputs 8
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input voltage
Rated value, DC 24 V
for signal "0" -3 to +5 V
for signal "1" 13 to 30 V
Input current
for signal "1", typ. 7 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", min. 1.2 ms
at "0" to "1", max. 4.8 ms
Cable length
Cable length unshielded, max. 30 m
Encoder
Connectable encoders
2-wire sensor Yes
Permissible quiescent current (2-wire sensor), max. 1.5 mA
1st interface
Functionality
DP slave Yes
DP slave
Transmission rate, min. 9.6 kbit/s
Transmission rate, max. 12 Mbit/s
Services
Direct data exchange (slave-to-slave communication) Yes
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes
Diagnostics indication LED
Group error SF (red) Yes
Galvanic isolation
Galvanic isolation No electrical isolation between the load voltages and between the load voltages and all the other circuit components
Galvanic isolation digital inputs
between the channels No
between the channels and the backplane bus No
Degree and class of protection
IP67 Yes
Dimensions
Width 175 mm
Height 180 mm
Depth 110 mm
Status May 23, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue