6ES7141-3BF00-0XA0 ET200ECO, BM141, 8DI, 24V DC

0 reviews | Write a review

Product Code: 6ES7141-3BF00-0XA0

Availability: In Stock

Price: $104.81

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7141-3BF00-0XA0

		SIMATIC DP, BASIC MODULE BM141 ET 200ECO: 8DI 24V DC; 8 X M12, SINGLE-ASSIGNEMENT, DEGREE OF PROTECTION IP65/67; CONNECTING BLOCK 6ES7194-3AA00-0.A0 MUST BE ORDERED SEPARTELY
General information
Vendor identification (VendorID)		80DBh
Supply voltage
Load voltage 1L+
● Rated value (DC)		24 V
● Reverse polarity protection		Yes
Input current
from supply voltage 1L+, max.		70 mA; Typical
Encoder supply
Number of outputs		8
Output voltage		24 V DC
short-circuit protection		Yes; Electronic
Output current
● Output current, rated value		1 A; Aggregate current up to 55 °C
Power losses
Power loss, typ.		2.4 W
Digital inputs
Number of digital inputs		8
Input characteristic curve in accordance with IEC 61131, type 1		Yes
Number of simultaneously controllable inputs
● Number of simultaneously controllable inputs		8; All mounting positions up to 55 °C
Input voltage
● Type of input voltage		DC
● Rated value, DC		24 V
● for signal "0"		-3 to +5V
● for signal "1"		13 to 30 V
Input current
● for signal "1", typ.		7 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max.		3 ms; Typical
— at "1" to "0", max.		3 ms; Typical
Cable length
● Cable length unshielded, max.		30 m
Encoder
Connectable encoders
● 2-wire sensor		Yes
— Permissible quiescent current (2-wire sensor), max.		1.5 mA
Interfaces
PROFIBUS DP
● Transmission rate, max.		12 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 3 / 6 / 12 Mbit/s
Protocols
PROFIBUS DP		Yes
Interrupts/diagnostics/status information
Status indicator		Yes
Alarms
● Alarms		No
Diagnostic messages
● Diagnostics		Yes; Diagnostic information readable
Diagnostics indication LED
● Group error SF (red)		Yes
● Status indicator digital input (green)		Yes
● Channel error indicator F (red)		No
Galvanic isolation
between PROFIBUS DP and all other circuit components		Yes
Galvanic isolation digital inputs
● between the channels		No
Permissible potential difference
between different circuits		75 VDC / 60 VAC
Isolation
Isolation checked with		500 V DC
Dimensions
Width		60 mm
Height		210 mm
Depth		28 mm
Weights
Weight, approx.		210 g
last modified:		08.09.2014