6ES7138-4FA04-0AB0 ET200S, EL-MOD., 4/8 F-DI, DC 24V

0 reviews | Write a review

Product Code: 6ES7138-4FA04-0AB0

Availability: In Stock

Price: $123.30

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7138-4FA04-0AB0

		SIMATIC DP, ELECTRON. MODULE F. ET200S, 4/8 F-DI PROFISAFE, 24V DC, 30 MM WIDTH UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849), ALSO USEABLE IN PROFINET- NETWORK WITH IM151-3 HF
Supply voltage
24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		No
Encoder supply
Number of outputs		2
Output voltage		min. L+ (-1.5 V)
short-circuit protection		Yes; Electronic (response threshold 0.7 A to 1.8 A)
Output current
● Rated value		300 mA
● permissible range		0 to 300 mA
Power losses
Power loss, typ.		4 W
Address area
Occupied address area
● Inputs		6 byte
● Outputs		4 byte
Digital inputs
Number of digital inputs		8; 8 single channel, 4 two-channel
Input characteristic curve in accordance with IEC 61131, type 1		Yes
Number of simultaneously controllable inputs
● Number of simultaneously controllable inputs		8
Input voltage
● Type of input voltage		DC
● Rated value, DC		24 V
● for signal "0"		-30 to +5 V
● for signal "1"		15 to 30 V
Input current
● for signal "1", typ.		3.7 mA
Input delay (for rated value of input voltage)
for standard inputs
— Parameterizable		Yes
— at "0" to "1", min.		0.3 ms
— at "0" to "1", max.		17 ms
— at "1" to "0", min.		0.3 ms
— at "1" to "0", max.		17 ms
Cable length
● Cable length, shielded, max.		200 m
● Cable length unshielded, max.		200 m
Encoder
Connectable encoders
● 2-wire sensor		No
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm		Yes
Diagnostic messages
● Diagnostic functions		Yes
● Diagnostic information readable		Yes
● Short circuit		Yes
Diagnostics indication LED
● Group error SF (red)		Yes
● Status indicator digital input (green)		Yes
Galvanic isolation
Galvanic isolation digital inputs
● between the channels		No
● between the channels and the backplane bus		Yes
● between the channels and the load voltage L+		No
Permissible potential difference
between M internally and the inputs		75 VDC / 60 VAC
Isolation
Isolation checked with		500 V DC
Standards, approvals, certificates
Highest safety class achievable in safety mode
● acc. to EN 954		4
● acc. to IEC 61508		SIL 2 (single-channel), SIL 3 (two-channel)
Dimensions
Width		30 mm
Height		81 mm
Depth		52 mm
Weights
Weight, approx.		78 g
last modified:		25.09.2014