6ES7132-7RD11-0AB0 ET200ISP, EL-MOD., 4DO, DC 17,4V, 27MA

6ES7132-7RD11-0AB0 ET200ISP, EL-MOD., 4DO, DC 17,4V, 27MA

Product Code: 6ES7132-7RD11-0AB0

Availability: In Stock

Price: $204.82
Qty:
Add to Wish List
Add to Compare
  
 
Digital output module 4DO 17.4 V DC

-
SIMATIC DP, ELECT. SUBMODULE FOR ET 200ISP, 4 DO, DC 17,4V/27MA, "H"-SHUT DOWN
Input current
from load voltage L+ (without load), max. 300 mA
from backplane bus 3.3 V DC, max. 10 mA
Power losses
Power loss, typ. 2.1 W
Address area
Address space per module
without packing 2 byte
Digital outputs
Number of digital outputs 4; additionally 1 intrinsically-safe input for H shutdown
Short-circuit protection Yes
No-load voltage Uao (DC) 17.4 V
Internal resistor Ri 150 Ω
Trend key points E
Voltage Ue (DC) 13.2 V
Current Ie 27 mA
Output current
for signal "1" rated value 0.027 A
Output delay with resistive load
"0" to "1", max. 2 ms
"1" to "0", max. 1.5 ms
Parallel switching of 2 outputs
for increased power Yes
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 2 Hz
Cable length
Cable length, shielded, max. 500 m
Cable length unshielded, max. 500 m
Interrupts/diagnostics/status information
Status indicator Yes
Alarms
Alarms No
Diagnostic alarm Yes; Parameterizable
Diagnostic messages
Diagnostic functions Yes
Diagnostic information readable Yes
Wire break Yes
Short circuit Yes
Diagnostics indication LED
Group error SF (red) Yes
Status indicator digital output (green) Yes
Parameter
Remark 14 byte
Diagnosis: wire break Yes
Diagnosis: short circuit Yes
Behavior on CPU/Master STOP, channel-wise Substitute a value/keep last value
Ex(i) characteristics
Max. values of output circuits (per channel)
Ta (permissible ambient temperature), max. 70 °C
Galvanic isolation
Galvanic isolation digital outputs
between the channels No
between the channels and the backplane bus Yes
between the channels and the load voltage L+ Yes
Standards, approvals, certificates
Use in hazardous areas
Type of protection acc. to EN 50020 (CENELEC) II2 G (1) GD Ex ib[ia] IIC T4 and I M2 Ex ib[ia] I
Type of protection acc. to KEMA 04 ATEX 1249
Dimensions
Width 30 mm
Height 129 mm
Depth 136.5 mm
Weights
Weight, approx. 255 g
Status Jun 9, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue