6ES7132-4BD01-0AA0 ET200S, EL-MOD., 4DO ST,DC24V, 0.5A,5PCS

0 reviews | Write a review

Product Code: 6ES7132-4BD01-0AA0

Availability: In Stock

Price: $102.07

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7132-4BD01-0AA0

		SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DO STANDARD DC 24V/0.5A, 15 MM WIDTH, 5 PIECES PER PACKAGING UNIT
Supply voltage
Reverse voltage protection		Yes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC)		24 V; From power module
● Reverse polarity protection		Yes; polarity reversal can lead to the digital outputs being connected through
Input current
from load voltage L+ (without load), max.		5 mA; Per channel
from backplane bus 3.3 V DC, max.		10 mA
Power losses
Power loss, typ.		0.8 W
Address area
Address space per module
● with packing		4 bit
● without packing		1 byte
Digital outputs
Number of digital outputs		4
short-circuit protection
● Response threshold, typ.		0.7 to 1.5 A
Limitation of inductive shutdown voltage to		-55 to -60 V, L+( )
Controlling a digital input		Yes
Switching capacity of the outputs
● Lamp load, max.		5 W
Load resistance range
● lower limit		48 Ω
● upper limit		3 400 Ω
Output voltage
● for signal "1", min.		L+ (-1 V)
Output current
● for signal "1" rated value		0.5 A
● for signal "1" permissible range for 0 to 60 °C, min.		7 mA
● for signal "1" permissible range for 0 to 60 °C, max.		600 mA
● for signal "0" residual current, max.		0.3 mA
Output delay with resistive load
● "0" to "1", max.		100 µs
● "1" to "0", max.		300 µs
Parallel switching of 2 outputs
● for increased power		No
● for redundant control of a load		Yes; per module
Switching frequency
● with resistive load, max.		100 Hz
● with inductive load, max.		2 Hz
● on lamp load, max.		10 Hz
Aggregate current of outputs (per group)
all mounting positions
— up to 60 °C, max.		2 A
Cable length
● Cable length, shielded, max.		1 000 m
● Cable length unshielded, max.		600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes
Interrupts/diagnostics/status information
Diagnostic messages
● Diagnostic functions		No
Diagnostics indication LED
● Status indicator digital output (green)		Yes
Parameter
Remark		1 byte
Galvanic isolation
Galvanic isolation digital outputs
● between the channels		No
● between the channels and the backplane bus		Yes
Isolation
Isolation checked with		500 V DC
Dimensions
Width		15 mm
Height		81 mm
Depth		52 mm
Weights
Weight, approx.		40 g
last modified:		25.09.2014