6ES7132-4HB10-0AB0 ET200S, EL-MOD., 2RO,DC48V/AC230V,5A,5PC

Product Code: 6ES7132-4HB10-0AB0

Availability: In Stock

Price: $135.63
  
 
Artikelnummer 6ES7132-4HB10-0AB0
SIMATIC DP, 5 ELECTRON. MODULES ET200S: 2DO RELAY(FORM C CONT.) DC24V-48V/5A, AC24V-230V/5A, 15 MM WIDTH, FIRST-UP SIGNAL, 5 PIECES PER PACKAGING UNIT
Supply voltage
Load voltage L+
● Rated value (DC) 24 V; From power module
● Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 30 mA
from backplane bus 3.3 V DC, max. 10 mA
Power loss
Power loss, typ. 0.6 W
Address area
Address space per module
● with packing 2 bit
● without packing 1 byte
Digital outputs
Number of digital outputs 2
Short-circuit protection No
Limitation of inductive shutdown voltage to No
Controlling a digital input Yes
Output current
● for signal "1" rated value 5 A
● for signal "1" minimum load current 8 mA
Parallel switching of 2 outputs
● for uprating No
● for redundant control of a load No
Switching frequency
● with resistive load, max. 2 Hz
● with inductive load, max. 0.5 Hz
● on lamp load, max. 2 Hz
Relay outputs
Switching capacity of contacts
— Thermal continuous current, max. 5 A
Cable length
● Cable length, shielded, max. 1 000 m
● Cable length unshielded, max. 600 m
Isochronous mode
Isochronous mode (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Substitute values connectable Yes; 0/1
Diagnostic messages
● Diagnostic functions No
Diagnostics indication LED
● Status indicator digital output (green) Yes
Parameter
Remark 3 byte
Galvanic isolation
Galvanic isolation digital outputs
● between the channels Yes
● between the channels and the backplane bus Yes
● between the channels and the load voltage L+ Yes
Isolation
tested with
● Channels against backplane bus and load voltage L+ 2500 V DC
● Load voltage L+ against backplane bus 500 V DC
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 50 g
last modified: 21.08.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: