6ES7132-7RD10-0AB0 ET200ISP, EL-MOD., 4DO, DC 17,4V, 27MA

6ES7132-7RD10-0AB0 ET200ISP, EL-MOD., 4DO, DC 17,4V, 27MA

Product Code: 6ES7132-7RD10-0AB0

Availability: In Stock

Price: $245.92
Qty:
Add to Wish List
Add to Compare
  
 
Digital output module 4DO DC 17.4V

-
SIMATIC DP, ELECT. SUBMODULE FOR ET 200ISP, 4 DO, DC 17,4V/27MA
Input current
from load voltage L+ (without load), max. 300 mA
Power losses
Power loss, typ. 2.1 W
Digital outputs
Number of digital outputs 4
No-load voltage Uao (DC) 17.4 V
Internal resistor Ri 150 Ω
Trend key points E
Voltage Ue (DC) 13.2 V
Current Ie 27 mA; 54 mA when outputs connected in parallel
Output delay with resistive load
"0" to "1", max. 2 ms
"1" to "0", max. 1.5 ms
Parallel switching of 2 outputs
for increased power Yes
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 2 Hz
Cable length
Cable length, shielded, max. 200 m
Cable length unshielded, max. 200 m
Interrupts/diagnostics/status information
Alarms
Alarms No
Diagnostic alarm Yes; Parameterizable
Diagnostic messages
Diagnostic information readable Yes
Wire break Yes; R > 10 kohms, I < 100 µA
Short circuit Yes; R< 800 ohms (one output), R< 40 ohms (outputs connected in parallel)
Diagnostics indication LED
Group error SF (red) Yes
Status indicator digital output (green) Yes; Per channel
Galvanic isolation
Galvanic isolation digital outputs
between the channels No
between the channels and the backplane bus Yes
between the channels and the load voltage L+ Yes
Permissible potential difference
between different circuits 60V DC/30V AC
Standards, approvals, certificates
CE mark Yes
Use in hazardous areas
Type of protection acc. to EN 50020 (CENELEC) II2 G (1) GD EEx ib[ia] IIC T4
Type of protection acc. to KEMA 04 ATEX 1249
Dimensions
Width 30 mm
Height 129 mm
Depth 136.5 mm
Weights
Weight, approx. 255 g
Status Jun 9, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue