6ES7131-4RD00-0AB0 ET200S, EL-MOD., 4DI DC 24V NAMUR

6ES7131-4RD00-0AB0 ET200S, EL-MOD., 4DI DC 24V NAMUR

Product Code: 6ES7131-4RD00-0AB0

Availability: In Stock

Price: $76.72
Qty:
Add to Wish List
Add to Compare
  
 
Digitalausgabemodul 2DO

-
SIMATIC DP, 1 ELECTRON. MODULE ET 200S: 4DI DC 24V NAMUR, 15 MM WIDTH, WITH LED SF (GROUP FAULT),
Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
from supply voltage L+, max. Dependent on encoder
Encoder supply
Number of outputs 1
Output voltage min. 8.2 V, loaded
short-circuit protection Yes; Electronic
Output current
Output current, rated value 45 mA
Power losses
Power loss, typ. 1.6 W
Address area
Address space per module
with packing 4 bit
without packing 1 byte
Digital inputs
Number of digital inputs 4
Number of NAMUR inputs 4
Parallel switching of inputs No
Number of simultaneously controllable inputs 4
Input voltage
Type of input voltage DC
Input current
for 10 k switched contact
for signal "0" 0.35 to 1.2 mA
for signal "1" 2.1 to 7 mA
for unswitched contact
for signal "0", max. (permissible quiescent current) 0.5 mA
for signal "1" typ. 8 mA
for NAMUR encoders
for signal "0" 0.35 to 1.2 mA
for signal "1" 2.1 to 7 mA
Input delay (for rated value of input voltage)
for standard inputs
at "0" to "1", max. 4.6 µs
at "1" to "0", max. 4.6 µs
Cable length
Cable length, shielded, max. 200 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes; can be set
Hardware interrupt No
Diagnostic messages
Diagnostic functions Yes; Diagnostic alarm
Diagnostic information readable Yes
Diagnostics indication LED
Group error SF (red) Yes
Status indicator digital input (green) Yes; per channel
Parameter
Remark 12 byte
Galvanic isolation
Galvanic isolation digital inputs
between the channels No
between the channels and the backplane bus Yes
between the channels and the load voltage L+ Yes
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
Isolation checked with 500 V DC
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 35 g
Status Jun 16, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue