|
SIMATIC SC,ELECTRONIC SUBMODULE 1 AO, +/-10V, 1..5V |
|
| Supply voltage |
| Load voltage 1L+ |
| Rated value (DC) |
24 V |
| Reverse polarity protection |
Yes |
| Input current |
| from supply voltage L+, max. |
50 mA |
| Power losses |
| Power loss, max. |
1 W |
| Hardware configuration |
| Rack |
| Required terminal block |
TB 16SC |
| Slots |
| Required slots |
2; from 8 |
| Analog outputs |
| Number of analog outputs |
1 |
| Voltage output, short-circuit protection |
Yes |
| Voltage output, short-circuit current, max. |
30 mA |
| Output ranges, voltage |
| 1 to 5 V |
Yes |
| -10 to +10 V |
Yes |
| Connection of actuators |
| for voltage output 2-conductor connection |
Yes |
| for voltage output 4-conductor connection |
Yes |
| Load impedance (in rated range of output) |
|
1 µF |
| Destruction limits against externally applied voltages and currents |
| Voltages at the outputs towards MANA |
15 V; max. 15 V continuous; 75 V for max. 1 s (mark to space ratio 1:20) |
| Current, max. |
50 mA; DC |
| Cable length |
|
200 m |
| Analog value creation |
| Integrations and conversion time/resolution per channel |
| Resolution (incl. overrange) |
S7 representation: +/-10 V, 1 to 5 V; S5 representation: 12 bits, 11 bits |
| Resolution with overrange (bit including sign), max. |
12 bit |
| Conversion time (per channel) |
5 ms |
| Settling time |
| for resistive load |
0.1 ms |
| for capacitive load |
3.3 ms |
| Errors/accuracies |
| Linearity error (relative to output range), (+/-) |
0.06 % |
|
0.01 %/K |
| Repeat accuracy in steady state at 25 °C (relative to output area), (+/-) |
0.1 % |
| Operational limit in overall temperature range |
| Voltage, relative to output area, (+/-) |
0.9 % |
| Basic error limit (operational limit at 25 °C) |
| Voltage, relative to output area, (+/-) |
0.6 % |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency |
| Common mode interference (UCM < Vss AC (50 Hz)), min. |
30 dB |
| Interrupts/diagnostics/status information |
| Substitute values connectable |
No |
| Alarms |
| Alarms |
No |
| Diagnostic alarm |
No |
| Galvanic isolation |
| Galvanic isolation analog outputs |
| between the channels and the backplane bus |
No; Optocoupler |
| between the channels and the power supply of the electronics |
No |
| Permissible potential difference |
| between reference point of load and QV-(UCM) |
2 V DC / 2 Vpp AC |
| Dimensions |
| Width |
20 mm |
| Height |
64 mm |
| Depth |
51 mm |
| Weights |
| Weight, approx. |
25 g |
| Status |
May 9, 2014 |
