6ES7122-1BB10-0AA0 ET200L-SC, EL-MOD., 2DO, DC 24V/2A, 2PCS

Product Code: 6ES7122-1BB10-0AA0

Availability: In Stock

Price: $44.18
Qty:
Add to Wish List
Add to Compare
  
 
SIMATIC SC,ELECTRONIC SUBMODULE 2 DO, 24 V DC / 2 A 2 PIECES PER PACKAGING UNIT
Supply voltage
Load voltage L+
Rated value (DC) 24 V
Input current
from supply voltage L+, max. 6 mA
Power losses
Power loss, typ. 0.9 W
Hardware configuration
Rack
Required terminal block TB 16SC
Digital outputs
Number of digital outputs 2
Product function / at the digital outputs / short-circuit protection Yes; Electronic
Response threshold, typ. 2.8 to 7.2 A
Limitation of inductive shutdown voltage to typ. (L+) -48 V
Controlling a digital input Yes
Switching capacity of the outputs
Lamp load, max. 10 W
Load resistance range
lower limit 12 Ω
upper limit 4800 Ω
Output voltage
for signal "1", min. L+ (-0.5 V)
Output current
for signal "1" rated value 2 A
for signal "1" permissible range for 0 to 40 °C, min. 5 mA
for signal "1" permissible range for 0 to 40 °C, max. 2.4 A
for signal "1" permissible range for 40 to 60 °C, min. 5 mA
for signal "1" permissible range for 40 to 60 °C, max. 1.8 A
for signal "0" residual current, max. 0.6 mA
Output delay with resistive load
"0" to "1", max. 200 µs
"1" to "0", max. 1.3 ms
Parallel switching of 2 outputs
for increased power Yes
for redundant control of a load No
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 0.2 Hz; with inductive load to IEC 947-5-1, 13 DC /15 AC: 0.2 Hz at 1 A, 0.1 Hz at 2 A
on lamp load, max. 1 Hz
Total current of the outputs (per module)
horizontal installation
up to 40 °C, max. 3 A
up to 60 °C, max. 2 A
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Interrupts/diagnostics/status information
Alarms
Alarms No
Diagnostic messages
Diagnostic functions No
Diagnostics indication LED
Status indicator digital output (green) Yes
Galvanic isolation
Galvanic isolation digital outputs
between the channels No
between the channels and the backplane bus No; Optocoupler
Isolation
Isolation checked with 1500 V AC
Dimensions
Width 10 mm
Height 64 mm
Depth 51 mm
Required slots 1; from 8
Weights
Weight, approx. 15 g
Status Dec 2, 2013

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue