6ES7223-1PM22-0XA0 EM223, 32DI DC24V/32DA RELAY, 2A/POINT

0 reviews | Write a review

Product Code: 6ES7223-1PM22-0XA0

Availability: In Stock

Price: $339.08

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7223-1PM22-0XA0

		SIMATIC S7-200, DIGITAL I/O EM 223, FOR S7-22X CPU ONLY, 32 DI 24 V DC, SINK/SOURCE 32 DO RELAY, 2A/POINT
Supply voltage
Load voltage L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		5 V
● permissible range, upper limit (DC)		30 V
Load voltage L1
● Rated value (AC)		230 V; 24 V AC to 230 V AC
● permissible range, lower limit (AC)		5 V
● permissible range, upper limit (AC)		250 V
Input current
from backplane bus 5 V DC, max.		205 mA
from coil current, max.		9 mA; for each output on signal "1"
from sensor current supply or external current supply (24 V DC), max.		128 mA
Power loss
Power loss, typ.		13 W
Digital inputs
Number of digital inputs		32
Input voltage
● Type of input voltage		AC/DC
● Rated value, DC		24 V
● for signal "0"		0 to 5 V
● for signal "1"		15 to 30 VDC
Input current
● for signal "1", typ.		4 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max.		4.5 ms
Digital outputs
Number of digital outputs		32; Relays
Short-circuit protection		No
Output voltage
● for signal "0", max.		0.1 V; with 10 kOhm load
● for signal "1", min.		L+/L1
Output current
● for signal "1" rated value		2 000 mA
Total current of the outputs (per group)
all mounting positions
— maximum current per conductor/group		2 A; 10 A per group
Relay outputs
● Number of operating cycles, max.		10 000 000; mechanically 10 million, at rated load voltage 100,000
Switching capacity of contacts
— with inductive load, max.		0.75 A; per output
— on lamp load, max.		200 W; 30 W with DC, 200 W with AC
— with resistive load, max.		2 A; per output
Cable length
● Cable length, shielded, max.		500 m
● Cable length unshielded, max.		150 m
Encoder
Connectable encoders
● 2-wire sensor		Yes
— permissible quiescent current (2-wire sensor), max.		1 mA
Galvanic isolation
Galvanic isolation digital inputs
● Galvanic isolation digital inputs		Yes; Optocoupler
● between the channels, in groups of		16
Galvanic isolation digital outputs
● Galvanic isolation digital outputs		Yes; Relays
● between the channels, in groups of		11; 11/11/10
Isolation
Isolation tested with		500 V AC
Connection method
Plug-in I/O terminals		Yes
Dimensions
Width		196 mm
Height		80 mm
Depth		62 mm
Weights
Weight, approx.		580 g
last modified:		31.07.2014