6ES7154-8AB00-0AB0 ET200PRO: IM 154-8 PN/DP CPU, 256KB

6ES7154-8AB00-0AB0 ET200PRO: IM 154-8 PN/DP CPU, 256KB

Product Code: 6ES7154-8AB00-0AB0

Availability: In Stock

Price: $753.50
Qty:
Add to Wish List
Add to Compare
  
 
Interface module IM 154-8 PN/DP CPU with connection module

-
SIMATIC DP, IM 154-8 PN/DP PLC FOR ET200PRO, 256KB WORK MEMORY, INT. PROFINET IF, INT.PROFIBUS DP MASTER/SLAVE IF PROT. IP65/67, MMC REQUIRED
General information
Hardware product version 01
Firmware version V2.5.0
Engineering with
Programming package STEP 7 V5.4 SP1 with HW update
Supply voltage
Rated value (DC) 24 V
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
External protection for supply cables (recommendation) MCB 24V DC / 16A with tripping characteristic Type B and C (see ET 200pro manual)
Load voltage L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption (rated value) 350 mA; Typical
Current consumption (in no-load operation), typ. 200 mA; Typical, current consumption for CPU in STOP state
Rated value at 24 V DC 200 mA; Typical, current consumption for CPU in STOP state
Inrush current, max. 2 A; Typical
Inrush current, typ. 2 A; Typical
Starting current inrush I²t 0.04 A²·s; Typical
I²t 0.04 A²·s; Typical
Power losses
Power loss, typ. 8.5 W; Typical
Memory
Work memory
integrated 256 kbyte
expandable No
Load memory
pluggable (MMC) Yes
pluggable (MMC), max. 8 Mbyte
Data management on MMC (after last programming), min. 10 a
Backup
present Yes
without battery Yes
CPU processing times
for bit operations, typ. 0.1 µs
for word operations, typ. 0.2 µs
for fixed point arithmetic, typ. 2 µs
for floating point arithmetic, typ. 3 µs
CPU-blocks
Number of blocks (total) 1024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
Number, max. 1023; Number band: 1 to 1023
Size, max. 16 kbyte
FB
Number, max. 1024; Number range: 0 to 2047
Size, max. 16 kbyte
FC
Number, max. 1024; Number range: 0 to 2047
Size, max. 16 kbyte
OB
Size, max. 16 kbyte
Number of free cycle OBs 1; OB 1
Number of time alarm OBs 1; OB 10
Number of delay alarm OBs 1; OB 20
Number of time interrupt OBs 1; OB 35
Number of process alarm OBs 1; OB 40
Number of DPV1 alarm OBs 3; OB 55, 56, 57
Number isochronous mode OBs 1; OB 61
Number of startup OBs 1; OB 100
Number of asynchronous error OBs 6; OB 80, 82, 83, 85, 86, 87 (OB83 only for PROFINET IO)
Number of synchronous error OBs 2; OB 121, 122
Nesting depth
per priority class 8
additional within an error OB 4
Counters, timers and their retentivity
S7 counter
Number 256
Retentivity
adjustable Yes
lower limit 0
upper limit 255
preset 8
Counting range
adjustable Yes
lower limit 0
upper limit 999
IEC counter
present Yes
Type SFB
S7 times
Number 256
Retentivity
adjustable Yes
lower limit 0
upper limit 255
preset No retentivity
Time range
lower limit 10 ms
upper limit 9990 s
IEC timer
present Yes
Type SFB
Data areas and their retentivity
retentive data area, total All, 128 KB max.
Flag
Number, max. 2048 byte
Retentivity available Yes; MB 0 to MB 2047
Retentivity preset MB 0 to MB 15
Number of clock memories 8
Data blocks
Number, max. 1023; From DB 1 to DB 1023
Size, max. 16 kbyte
Retentivity adjustable Yes; From DB 1 to DB 1023
Retentivity preset Yes
Local data
per priority class, max. 1024 byte; per block max. 510
Address area
I/O address area
Inputs 2048 byte
Outputs 2048 byte
of which, distributed
Inputs 2048 byte
Outputs 2048 byte
Process image
Inputs, adjustable 2048 byte
Outputs, adjustable 2048 byte
Inputs, default 128 byte
Outputs, default 128 byte
Subprocess images
Number of subprocess images, max. 1
Digital channels
Inputs 16384
Outputs 16384
Inputs, of which central 128
Outputs, of which central 64
Analog channels
Inputs 1024
Outputs 1024
Inputs, of which central 64
Outputs, of which central 64
Hardware configuration
Integrated power supply Yes; 24 V DC
Number of DP masters
integrated 1
Rack
Racks, max. 1
Modules per rack, max. 16; Expansion width max. 1 m
Time of day
Clock
Hardware clock (real-time clock) Yes
battery-backed and synchronizable Yes; on MPI: master/slave; on DP: when operated as DP master: master/slave; on PROFINET: via NTP (client only)
Deviation per day, max. 10 s
Backup time 6 wk; At 40 °C ambient temperature
Operating hours counter
Number 1
Range of values 0 to 2^31 hours (when using SFC 101)
Granularity 1 h
retentive Yes; Must be restarted at each restart
Clock synchronization
supported Yes
to MPI, master Yes
to MPI, slave Yes
to DP, master Yes
to DP, slave Yes; With DP slave only slave clock
in AS, master No
in AS, slave No
on Ethernet via NTP Yes; As client
Interfaces
Interfaces 1x MPI/PROFIBUS DP, 1x PROFINET (3 ports)
Number of USB interfaces 0
Number of parallel interfaces 0
Number of other interfaces 1; Ethernet (2 x M12 d-coded; 1 x RJ45)
Supports protocol for PROFINET IO
Number of PROFINET interfaces 1
WLAN
Number of wireless interfaces 0
1st interface
Interface type Integrated RS 485 interface
Physics RS 485
Isolated Yes
Functionality
MPI Yes
DP master Yes
DP slave Yes
Point-to-point connection No
MPI
Number of connections 16
Transmission rate, max. 12 Mbit/s
Services
PG/OP communication Yes
Routing Yes
Global data communication Yes
S7 basic communication Yes
S7 communication Yes
S7 communication, as client No
S7 communication, as server Yes
DP master
Transmission rate, max. 12 Mbit/s
Number of DP slaves, max. 124
Services
PG/OP communication Yes
Routing Yes
Global data communication No
S7 basic communication Yes
S7 communication Yes
S7 communication, as client No
S7 communication, as server Yes
Equidistance mode support Yes
Isochronous mode Yes; OB 61
SYNC/FREEZE Yes
Activation/deactivation of DP slaves Yes
DPV1 Yes
Address area
Inputs, max. 2048 byte
Outputs, max. 2048 byte
User data per DP slave
Inputs, max. 244 byte
Outputs, max. 244 byte
DP slave
Transmission rate, max. 12 Mbit/s
Automatic baud rate search Yes; only with passive interface
Address area, max. 32
User data per address area, max. 32 byte
Services
Routing Yes
Global data communication No
S7 basic communication No
S7 communication Yes
S7 communication, as client No
S7 communication, as server Yes
Direct data exchange (slave-to-slave communication) Yes
DPV1 No
Transfer memory
Inputs 244 byte
Outputs 244 byte
2nd interface
Interface type PROFINET
Physics Ethernet
Isolated Yes
Automatic detection of transmission speed Yes
Functionality
MPI No
DP master No
DP slave No
PROFINET IO Controller Yes
PROFINET CBA Yes
Point-to-point connection No
PROFINET IO Controller
Transmission rate, max. 100 Mbit/s
Number of connectable IO devices, max. 128
Max. number of connectable IO devices for RT
of which in line, max. 128
IRT, supported No
Prioritized startup supported No
Activation/deactivation of IO Devices Yes
IO Devices changing during operation (partner ports), supported No
Device replacement without swap medium No
Send cycles 250 µs, 500 µs, 1 ms
Updating time 250 µs - 128 ms (with send cycle of 250 µs); 500 µs - 256 ms (with send cycle of 500 µs); 1 ms - 512 ms (with send cycle 1 ms); minimum value of the send cycle is also dependent on the set communication share for PROFINET IO, on the number of IO Devices
Services
PG/OP communication Yes
Routing Yes
S7 communication Yes
Isochronous mode No
Open IE communication Yes; Via TCP/IP, ISO on TCP, and UDP
Address area
Inputs, max. 2048 byte
Outputs, max. 2048 byte
User data consistency, max. 254 byte
PROFINET CBA
acyclic transmission Yes
Cyclic transmission Yes
Isochronous mode
Isochronous operation (application synchronized up to terminal) Yes; For PROFIBUS only
Number of DP masters with isochronous mode 1
Communication functions
PG/OP communication Yes
Global data communication
supported Yes
Number of GD loops, max. 8
Number of GD packets, max. 8
Number of GD packets, transmitter, max. 8
Number of GD packets, receiver, max. 8
Size of GD packets, max. 22 byte
Size of GD packet (of which consistent), max. 22 byte
S7 basic communication
supported Yes
User data per job, max. 76 byte
User data per job (of which consistent), max. 76 byte
S7 communication
supported Yes
as server Yes
As client Yes
Open IE communication
TCP/IP Yes
Number of connections, max. 8
Data length, max. 8 kbyte; 8192 bytes with connection type 11h; 1460 bytes with connection type 01h
ISO-on-TCP (RFC1006) Yes
Number of connections, max. 8
Data length, max. 8 kbyte
UDP Yes
Number of connections, max. 8
Data length, max. 1472 byte
PROFINET CBA (at set setpoint communication load)
Setpoint for the CPU communication load 50 %
Number of remote interconnection partners 32
Number of functions, master/slave 30
Total of all Master/Slave connections 1000
Data length of all incoming connections master/slave, max. 4000 byte
Data length of all outgoing connections master/slave, max. 4000 byte
Number of device-internal and PROFIBUS interconnections 500
Data length of device-internal und PROFIBUS interconnections, max. 4000 byte
Data length per connection, max. 1400 byte
Remote interconnections with acyclic transmission
Sampling frequency: Sampling time, min. 500 ms
Number of incoming interconnections 100
Number of outgoing interconnections 100
Data length of all incoming interconnections, max. 2000 byte
Data length of all outgoing interconnections, max. 2000 byte
Data length per connection, max. 1400 byte
Remote interconnections with cyclic transmission
Transmission frequency: Transmission interval, min. 1 ms
Number of incoming interconnections 200
Number of outgoing interconnections 200
Data length of all incoming interconnections, max. 2000 byte
Data length of all outgoing interconnections, max. 2000 byte
Data length per connection, max. 250 byte
HMI variables via PROFINET (acyclic)
Number of stations that can log on for HMI variables (PN OPC/iMap) 3; 2x PN OPC/1x iMap
HMI variable updating 500 ms
Number of HMI variables 200
Data length of all HMI variables, max. 2000 byte
PROFIBUS proxy functionality
supported Yes
Number of linked PROFIBUS devices 16
Data length per connection, max. 240 byte
Number of connections
overall 16
usable for PG communication 15
reserved for PG communication 1
Adjustable for PG communication, min. 1
Adjustable for PG communication, max. 15
usable for OP communication 15
reserved for OP communication 1
adjustable for OP communication, min. 1
adjustable for OP communication, max. 15
usable for S7 basic communication 14
Reserved for S7 basic communication 0
adjustable for S7 basic communication, min. 0
adjustable for S7 basic communication, max. 14
usable for routing X1 as MPI: max. 10; X1 as DP master: max. 24; X1 as DP slave (active): max. 14; X2 as PROFINET: 24 max.
S7 message functions
Number of login stations for message functions, max. 16
Process diagnostic messages Yes
simultaneously active Alarm-S blocks, max. 40
Test commissioning functions
Status block Yes
Single step Yes
Number of breakpoints 2
Status/control
Status/control variable Yes
Variables Inputs, outputs, memory bits, DB, times, counters
Number of variables, max. 30
of which status variables, max. 30
of which control variables, max. 14
Forcing
Forcing Yes
Force, variables I/O
Number of variables, max. 10
Diagnostic buffer
present Yes
Number of entries, max. 500
adjustable No
Galvanic isolation
between backplane bus and electronics No
between backplane bus and all other circuit components Yes
between supply and all other circuits Yes
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
Isolation checked with In general 500 V DC, Ethernet interface 1500 V AC (for P1 and P2 on CM, for P3 on IM)
Degree and class of protection
IP (rear) IP65/67
Standards, approvals, certificates
CE mark Yes
CSA approval No
cULus Yes
RCM (former C-TICK) Yes
FM approval No
Configuration
Configuration software
STEP 7 Yes; From V 5.3 SP1 + HW-Support Package
programming
Command set see instruction list
Nesting levels 8
System functions (SFC) see instruction list
System function blocks (SFB) see instruction list
Programming language
LAD Yes
FBD Yes
STL Yes
SCL Yes
CFC Yes
GRAPH Yes
HiGraph® Yes
Know-how protection
User program protection/password protection Yes
Dimensions
Width 135 mm
Height 130 mm
Depth 65 mm; 60 mm without cover for RJ45 socket; 65 mm with cover for RJ45 socket
Weights
Weight, approx. 555 g
Status Jun 28, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue