6ES7151-1CA00-3BL0 ET 200S COMPACT, 16DI/16DO STD

6ES7151-1CA00-3BL0 ET 200S COMPACT, 16DI/16DO STD

Product Code: 6ES7151-1CA00-3BL0

Availability: In Stock

Price: $236.33
Qty:
Add to Wish List
Add to Compare
  
 
Artikelnummer 6ES7151-1CA00-3BL0
ET 200S COMPACT, 16DI/16DO STD DC24V, 3MS; DC24V, 0.5A EXPANDABLE WITH UP TO 12 ET 200S MODULES (NO F-MODULES) ELECTRONICBLOCK
General information
Vendor identification (VendorID) 8200H
Supply voltage
Load voltage 1L+
● Rated value (DC) 24 V
● Reverse polarity protection Yes
Input current
from supply voltage 1L+, max. 100 mA
Address area
Addressing volume
● Inputs 100 byte
● Outputs 100 byte
Digital inputs
Number of digital inputs 16
Input voltage
● Type of input voltage DC
● Rated value (DC) 24 V
● for signal "0" -30 to +5 V
● for signal "1" 13 to 30 V
Input current
● for signal "1", typ. 3 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", min. 3 ms
— at "0" to "1", max. 3 ms
Cable length
● Cable length unshielded, max. 1 000 m
Digital outputs
Number of digital outputs 16
short-circuit protection Yes
Limitation of inductive shutdown voltage to L+ (-55 to -60 V)
Controlling a digital input Yes
Switching capacity of the outputs
● Lamp load, max. 5 W
Output current
● for signal "1" permissible range for 0 to 60 °C, min. 7 mA
● for signal "0" residual current, max. 0.5 mA
Output delay with resistive load
● "0" to "1", max. 0.5 ms
● "1" to "0", max. 1.3 ms
Switching frequency
● with resistive load, max. 100 Hz
● with inductive load, max. 2 Hz
● on lamp load, max. 10 Hz
Aggregate current of outputs (per group)
all mounting positions
— up to 60 °C, max. 2 A
Cable length
● Cable length unshielded, max. 1 000 m
Encoder
Connectable encoders
● 2-wire sensor Yes
— Permissible quiescent current (2-wire sensor), max. 1.5 mA
Interfaces
Interface physics, RS 485 Yes
Interface physics, FOC No
With optical interface No
PROFINET IO
● Transmission rate, max. 12 Mbit/s
PROFIBUS DP
● PROFIBUS DP, output current, max. 80 mA
● Transmission procedure RS 485
● Direct data exchange (slave-to-slave communication) Yes
Cable length
— Cable length, max. 1 200 m
Protocols
PROFINET IO No
PROFIBUS DP Yes
Protocols (Ethernet)
● TCP/IP No
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Alarms
● Alarms No
Diagnostic messages
● Diagnostic functions Yes
Diagnostics indication LED
● Run mode RUN (green) Yes
● Group error SF (red) Yes
● Status indicator digital output (green) Yes
● Status indicator digital input (green) Yes
● Monitoring 24 V voltage supply ON (green) Yes
● Connection to network LINK (green) No
● Transmit/receive RX/TX (yellow) No
Galvanic isolation
between backplane bus and electronics No
between supply voltage and electronics No
Galvanic isolation digital inputs
● Galvanic isolation digital inputs No
Galvanic isolation digital outputs
● Galvanic isolation digital outputs Yes
Isolation
Isolation checked with 500 V DC
Degree and class of protection
Degree of protection to EN 60529
● IP20 Yes
Connection method
Inputs/outputs Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection
Dimensions
Width 120 mm
Height 81 mm
Depth 58 mm
Weights
Weight, approx. 230 g; EB only
last modified: 14.10.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue