6ES7144-4JF00-0AB0 ET200PRO, EM 4 AI-RTD HF

6ES7144-4JF00-0AB0 ET200PRO, EM 4 AI-RTD HF

Product Code: 6ES7144-4JF00-0AB0

Availability: In Stock

Price: $157.55
Qty:
Add to Wish List
Add to Compare
  
 
Digital output module 4DO

-
SIMATIC DP, ELECTRONIC MODULES FOR ET200PRO 4 AI RTD HIGH FEATURE, PT100; PT200; PT500; PT1000; NI100; NI200; NI500; NI1000; CHANNEL DIANOSTICS; INCLUSIVE BUS MODULE, CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY
Supply voltage
Load voltage L+
Rated value (DC) 24 V
Reverse polarity protection Yes; against destruction
Input current
from backplane bus 3.3 V DC, max. 10 mA; Typical
Power losses
Power loss, typ. 0.7 W
Address area
Address space per module
Address space per module, max. 8 byte
Analog inputs
Number of analog inputs 4
Cycle time (all channels) max. 83 ms; 83 ms at 50 Hz; 69 ms at 60 Hz
Technical unit for temperature measurement adjustable Yes
Input ranges
Voltage No
Current No
Thermocouple No
Resistance thermometer Yes
Resistance Yes
Input ranges (rated values), resistance thermometers
Cu 10 No
Ni 100 Yes
Input resistance (Ni 100) 10000 kΩ
Ni 1000 Yes
Input resistance (Ni 1000) 10000 kΩ
Ni 120 Yes
Input resistance (Ni 120) 10000 kΩ
Ni 200 Yes
Input resistance (Ni 200) 10000 kΩ
Ni 500 Yes
Input resistance (Ni 500) 10000 kΩ
Pt 100 Yes
Input resistance (Pt 100) 10000 kΩ
Pt 1000 Yes
Input resistance (Pt 1000) 10000 kΩ
Pt 200 Yes
Input resistance (Pt 200) 10000 kΩ
Pt 500 Yes
Input resistance (Pt 500) 10000 kΩ
Input ranges (rated values), resistors
0 to 150 ohms Yes
Input resistance (0 to 150 ohms) 10000 kΩ
0 to 300 ohms Yes
Input resistance (0 to 300 ohms) 10000 kΩ
0 to 600 ohms Yes
Input resistance (0 to 600 ohms) 10000 kΩ
0 to 3000 ohms Yes
Input resistance (0 to 3000 ohms) 10000 kΩ
Resistance thermometer (RTD)
Characteristic linearization
for resistance thermometer Ptxxx, Nixxx
Characteristic linearization
Parameterizable Yes
Cable length
Cable length, shielded, max. 30 m
Analog value creation
Measurement principle integrating
Integrations and conversion time/resolution per channel
Resolution with overrange (bit including sign), max. 15 bit
Integration time, ms 20 / 16,667
Interference voltage suppression for interference frequency f1 in Hz 50 / 60 Hz
Conversion time (per channel) 20.625 ms; 20.625 ms at 50 Hz; 17.25 ms at 60 Hz
Smoothing of measured values
Parameterizable Yes
Step: None Yes; 1 x cycle time
Step: low Yes; 4 x cycle time
Step: Medium Yes; 16 x cycle time
Step: High Yes; 64 x cycle time
Encoder
Connection of signal encoders
for resistance measurement with two-wire connection Yes; Line resistances are also measured
for resistance measurement with three-wire connection Yes
for resistance measurement with four-wire connection Yes
Errors/accuracies
Linearity error (relative to input range), (+/-) 0.05 %
Temperature error (relative to input range), (+/-) 0.0020 %/K
Crosstalk between the inputs, min. -50 dB
Repeat accuracy in steady state at 25 °C (relative to input area), (+/-) 0.015 %
Operational limit in overall temperature range
Resistance thermometer, relative to input area, (+/-) 0.175 %
Basic error limit (operational limit at 25 °C)
Resistance thermometer, relative to input area, (+/-) 0.125 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
Series mode interference (peak value of interference < rated value of input range), min. 50 dB
common mode voltage (USS < 2.5 V) , min. 70 dB; Interference voltage < 5 V
Interrupts/diagnostics/status information
Diagnostic messages
Wire break Yes
Group error Yes
Overflow/underflow Yes
Diagnostics indication LED
Group error SF (red) Yes
Parameter
Diagnosis: wire break Yes
Load voltage No
Measurement type/range R4L / R3L / R2L/ TR4L / TR3L / TR2L
Interference frequency suppression 50 / 60 Hz
Group diagnostics Yes
Overflow/underflow Yes
Unit Degrees C / Degrees F
Galvanic isolation
Galvanic isolation analog inputs
between the channels No
between the channels and the backplane bus Yes
Permissible potential difference
between the inputs (UCM) 5 Vpp AC
between MANA and M internally (UISO) 500 V DC
Isolation
Isolation checked with 500 V DC
Dimensions
Width 45 mm
Height 130 mm
Depth 35 mm
Weights
Weight, approx. 150 g
Status Jun 16, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue