6ES7142-1BD22-0XB0 ET200X, BM142, 4DO, 24V DC, 2A

6ES7142-1BD22-0XB0 ET200X, BM142, 4DO, 24V DC, 2A

Product Code: 6ES7142-1BD22-0XB0

Availability: In Stock

Price: $256.19
Qty:
Add to Wish List
Add to Compare
  
 
Digital electronic modules 8DI and 4DQ

-
SIMATIC DP, BASIC MODULE BM142 FOR ET200X, 4DO 24V DC/2A 5-PIN M12, PROTECTION IP 66/67, INTEGR. PROFIBUS DP IF, 12 MBIT/S, INTEGR. PS INTERFACE
Supply voltage
Load voltage 1L+
Rated value (DC) 24 V
Short-circuit protection Yes; Electronic
Reverse polarity protection Yes
Load voltage 2L+
Rated value (DC) 24 V
Reverse polarity protection No
Input current
from load voltage 2L+ (without load), max. 12 mA
from supply voltage 1L+, max. 180 mA
Power losses
Power loss, typ. 4 W
Hardware configuration
Expansion modules
Number of expansion modules, max. 7
of which motor starters, max. 6
of which, pneumatic interfaces, max. 6
Digital inputs
Cable length
Cable length unshielded, max. 30 m
Digital outputs
Number of digital outputs 4
Short-circuit protection Yes; Electronic
Response threshold, typ. 3 A
Switching capacity of the outputs
Lamp load, max. 10 W
Output current
for signal "1" rated value 2 A; at 24 V DC
for signal "0" residual current, max. 0.5 mA
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 0.5 Hz
on lamp load, max. 1 Hz
Aggregate current of outputs (per group)
all mounting positions
up to 20 °C, max. 6 A
up to 55 °C, max. 4 A
Cable length
Cable length unshielded, max. 30 m
1st interface
Functionality
DP slave Yes
DP slave
Transmission rate, min. 9.6 kbit/s
Transmission rate, max. 12 Mbit/s; 9,6 / 19,2 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 3 / 6 / 12 Mbit/s
Services
Direct data exchange (slave-to-slave communication) Yes; Sender
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes
Diagnostics indication LED
Bus fault BF (red) Yes
Group error SF (red) Yes
Monitoring 24 V voltage supply ON (green) Yes
Galvanic isolation
between PROFIBUS DP and all other circuit components Yes
Galvanic isolation digital inputs
between the channels No
between the channels and the backplane bus Yes
Dimensions
Width 134 mm; Width module 107 mm
Height 110 mm
Depth 55 mm
Status May 23, 2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue