6ES7135-4FB01-0AB0 ET200S, EL-MOD., 2AO U, +/-10V, 1-5V

6ES7135-4FB01-0AB0 ET200S, EL-MOD., 2AO U, +/-10V, 1-5V

Product Code: 6ES7135-4FB01-0AB0

Availability: In Stock

Price: $76.38
Qty:
Add to Wish List
Add to Compare
  
 
Artikelnummer 6ES7135-4FB01-0AB0
SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 2 AO U, 15 MM WIDTH, +/-10 V; 13 BIT + SIGN, 1..5V; 12BIT, CYCLE TIME < 1 MS WITH LED SF (GROUP FAULT)
Supply voltage
Load voltage L+
● Rated value (DC) 24 V; From power module
● Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 130 mA
from backplane bus 3.3 V DC, max. 10 mA
Power losses
Power loss, max. 2 W
Address area
Address space per module
● Address space per module, max. 4 byte
Analog outputs
Number of analog outputs 2
Voltage output, short-circuit protection Yes
Voltage output, short-circuit current, max. 25 mA
Cycle time (all channels) max. 1.5 ms
Output ranges, voltage
● 1 to 5 V Yes
● -10 to +10 V Yes
Connection of actuators
● for voltage output two-wire connection Yes; Without compensation of the line resistances
● for voltage output four-wire connection Yes
Load impedance (in rated range of output)
● with voltage outputs, min. 1 kΩ
● with voltage outputs, capacitive load, max. 1 µF
Destruction limits against externally applied voltages and currents
● Voltages at the outputs towards MANA 15 V; max. 15 V continuous; 75 V for max. 1 s (mark to space ratio 1:20)
● Current, max. 50 mA; DC
Cable length
● Cable length, shielded, max. 200 m
Analog value creation
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 14 bit; 1 to 5 V: 12 bits, +/-10 V: 13 bits + sign
Settling time
● for resistive load 0.1 ms
● for capacitive load 0.5 ms
● for inductive load 0.5 ms
Errors/accuracies
Output ripple (based on output area, bandwidth 0 to 50 kHz), (+/-) 0.02 %
Linearity error (relative to output range), (+/-) 0.02 %
Temperature error (relative to output range), (+/-) 0.01 %/K
Repeat accuracy in steady state at 25 °C (relative to output area), (+/-) 0.05 %
Operational limit in overall temperature range
● Voltage, relative to output area, (+/-) 0.4 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to output area, (+/-) 0.2 %
Interrupts/diagnostics/status information
Substitute values connectable Yes; 0 to 65535 (range of values must be within the rated range)
Diagnostic messages
● Short circuit Yes
● Group error Yes
Diagnostics indication LED
● Group error SF (red) Yes
Parameter
Remark 7 byte
Output type/range deactivated / 1 to 5 V / +/ -10 V
Diagnosis: short circuit Disable / enable
Group diagnostics Disable / enable
Behavior on CPU/Master STOP Output current and de-energized/substitute a value/keep last value
Galvanic isolation
Galvanic isolation analog outputs
● between the channels No
● between the channels and the backplane bus Yes
● between the channels and the load voltage L+ Yes
Permissible potential difference
between MANA and M internally (UISO) 75 VDC / 60 VAC
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 40 g
last modified: 18.09.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue