6ES7132-7RD01-0AB0 ET200ISP, EL-MOD., 4DO, DC 23,1V, 20MA

0 reviews | Write a review

Product Code: 6ES7132-7RD01-0AB0

Availability: In Stock

Price: $184.27

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7132-7RD01-0AB0

		SIMATIC DP, ELECTRONIC SUBMODULE FOR ET 200ISP, 4 DO, DC 23,1V/20MA, "H"-SHUT DOWN
Input current
from load voltage L+ (without load), max.		340 mA; with actuator supply
from backplane bus 3.3 V DC, max.		10 mA
Power losses
Power loss, typ.		2.5 W
Address area
Address space per module
● without packing		2 byte
Digital outputs
Number of digital outputs		4; additionally 1 intrinsically-safe input for H shutdown
short-circuit protection		Yes
No-load voltage Uao (DC)		23.1 V
Internal resistor Ri		275 Ω
Trend key points E
● Voltage Ue (DC)		17.1 V
● Current Ie		20 mA
Output current
● for signal "1" rated value		0.02 A
Output delay with resistive load
● "0" to "1", max.		2 ms
● "1" to "0", max.		1.5 ms
Parallel switching of 2 outputs
● for increased power		No; for Ex reasons not possible; nor for predecessor
Switching frequency
● with resistive load, max.		100 Hz
● with inductive load, max.		2 Hz
Cable length
● Cable length, shielded, max.		500 m
● Cable length unshielded, max.		500 m
Interrupts/diagnostics/status information
Status indicator		Yes
Alarms
● Diagnostic alarm		Yes; Parameterizable
Diagnostic messages
● Diagnostic functions		Yes
● Diagnostic information readable		Yes
● Wire break		Yes; R > 10 kohms, I < 100 µA
● Short circuit		Yes; R< 800 ohms (one output), R< 40 ohms (outputs connected in parallel)
Diagnostics indication LED
● Group error SF (red)		Yes
● Status indicator digital output (green)		Yes
Parameter
Diagnosis: wire break		Yes
Diagnosis: short circuit		Yes
Behavior on CPU/Master STOP, channel-wise		Substitute a value/keep last value
Ex(i) characteristics
Max. values of output circuits (per channel)
● Ta (permissible ambient temperature), max.		70 °C
Galvanic isolation
Galvanic isolation digital outputs
● between the channels		No
● between the channels and the backplane bus		Yes
● between the channels and the load voltage L+		Yes
Standards, approvals, certificates
Use in hazardous areas
● Type of protection acc. to EN 50020 (CENELEC)		II2 G (1) GD Ex ib[ia] IIC T4 and I M2 Ex ib[ia] I
● Type of protection acc. to KEMA		04 ATEX 1249
Dimensions
Width		30 mm
Height		129 mm
Depth		136.5 mm
Weights
Weight, approx.		255 g
last modified:		25.09.2014