6ES7132-4BF50-0AA0 ET200S, 8DO SINK OUTPUT DC24V/0,5A

6ES7132-4BF50-0AA0 ET200S, 8DO SINK OUTPUT DC24V/0,5A

Product Code: 6ES7132-4BF50-0AA0

Availability: In Stock

Price: $29.73
Qty:
Add to Wish List
Add to Compare
  
 
Artikelnummer 6ES7132-4BF50-0AA0
SIMATIC DP, 1 ELECTRON. MODULES FOR ET 200S, 8 DO SINK OUTPUT, DC24V/0,5A, 15 MM WIDTH, 1 PIECES PER PACKAGING UNIT
Supply voltage
Reverse voltage protection Yes; when using the same correctly polarized load voltage as on the power module
Load voltage L+
● Rated value (DC) 24 V; From power module
● Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 5 mA
from backplane bus 3.3 V DC, max. 10 mA
Power losses
Power loss, typ. 1.5 W
Address area
Address space per module
● without packing 1 byte
Digital outputs
Number of digital outputs 8
short-circuit protection Yes
● Response threshold, typ. 1,5 A
Limitation of inductive shutdown voltage to Typ. 47 V
Controlling a digital input Yes
Switching capacity of the outputs
● Lamp load, max. 5 W
Load resistance range
● lower limit 48 Ω
● upper limit 3 400 Ω
Output voltage
● for signal "1", min. Max. 1 V
Output current
● for signal "1" rated value 0.5 A
● for signal "1" permissible range for 0 to 60 °C, min. 5 mA
● for signal "1" permissible range for 0 to 60 °C, max. 700 mA
● for signal "0" residual current, max. 5 µA
Output delay with resistive load
● "0" to "1", max. 300 µs
● "1" to "0", max. 600 µs
Parallel switching of 2 outputs
● for increased power No
● for redundant control of a load Yes; per module
Switching frequency
● with resistive load, max. 100 Hz
● with inductive load, max. 0.5 Hz
● on lamp load, max. 10 Hz
Aggregate current of outputs (per group)
all mounting positions
— up to 60 °C, max. 4 A
Cable length
● Cable length, shielded, max. 1 000 m
● Cable length unshielded, max. 600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal) Yes
Interrupts/diagnostics/status information
Diagnostic messages
● Diagnostic functions No
Diagnostics indication LED
● Status indicator digital output (green) Yes
Parameter
Remark 3 byte
Galvanic isolation
Galvanic isolation digital outputs
● between the channels No
● between the channels and the backplane bus Yes
Isolation
Isolation checked with 500 V DC
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 40 g
last modified: 30.09.2014

Write a review

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue