6ES7131-0HF00-0XB0 ET200B, EL-MOD., 16DI, AC 120/230V

0 reviews | Write a review

Product Code: 6ES7131-0HF00-0XB0

Availability: In Stock

Price: $455.53

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7131-0HF00-0XB0

		SIMATIC DP, DIGITAL ELECTRONIC SUBMODULE, FOR ET 200B, W=235MM, 16DI, 120/230V AC
Input current
Rated value at 120 V AC		6.5 mA; at 60 Hz
Rated value at 230 V AC		10.5 mA; at 50 Hz
from supply voltage L1, max.		60 mA
Power loss
Power loss, typ.		6 W; at 230 V; 4.5 W at 120 V
Hardware configuration
Rack
● required terminal block		TB6/AC
Digital inputs
Number of digital inputs		16
Input characteristic curve in accordance with IEC 61131, type 1		Yes
Input voltage
● Rated value, AC		120/230 V AC
● for signal "0"		0 to 40 V
● for signal "1"		79 to 264 V
Input current
● for signal "1", typ.		3 mA; 3 to 16 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", min.		0 ms
— at "0" to "1", max.		25 ms
Cable length
● Cable length unshielded, max.		600 m
Encoder
Connectable encoders
● 2-wire sensor		No
— permissible quiescent current (2-wire sensor), max.		2 mA
Interfaces
PROFIBUS DP
● Transmission rate, max.		12 Mbit/s
Communication functions
Bus protocol/transmission protocol		PROFIBUS DP
Interrupts/diagnostics/status information
Diagnostics indication LED
● Bus fault BF (red)		Yes
● Run mode RUN (green)		Yes
● Status indicator digital input (green)		Yes
Galvanic isolation
between electronic block and PROFIBUS DP		Yes; 500 V DC to the logic, 1500 V AC to connecting terminals
Galvanic isolation digital inputs
● Galvanic isolation digital inputs		Yes; Optocoupler
● between the channels, in groups of		4
Degree and class of protection
IP20		Yes
Ambient conditions
Operating temperature
● horizontal installation, min.		0 °C
● horizontal installation, max.		60 °C; 40°C for other mountings
Air pressure
● permissible range, min.		795 hPa
● permissible range, max.		1 080 hPa
Relative humidity
● Operation, min.		15 %
● Operation, max.		95 %; RH class 2 in accordance with IEC 1131-2
Vibrations
● Operation, tested according to IEC 60068-2-6		Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)
Shock test
● tested according to IEC 60068-2-27		Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms
Connection method
Inputs/outputs		Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection
Dimensions
Width		235 mm; EB and TB
Height		130 mm; EB and TB
Depth		60 mm; EB and TB
Weights
Weight, approx.		811 g; EB and TB
last modified:		21.08.2014