Product type designation |
RUGGEDCOM RMC30 |
Product description |
2-Port Serial-to-Ethernet Converter, 128-bit Encryption |
|
RUGGEDCOM RMC30 2-PORT SERIAL-TO- ETHERNET SERVER 128-BIT ENCRYPTION; |
Transmission rate |
Transfer rate |
10 Mbit/s, 100 Mbit/s |
● acc. to RS 232 |
300 bit/s ... 115200 bit/s |
● acc. to RS 422/485 |
300 bit/s ... 115200 bit/s |
Interfaces |
Number of electrical/optical connections |
|
● for network components or terminal equipment / maximum |
2 |
Number of electrical connections |
|
● for network components or terminal equipment |
1 |
● for network components or terminal equipment / maximum |
1 |
● for serial interfaces / acc. to RS 232/RS 422/RS 485 / maximum |
2 |
● for power supply |
1 |
● for redundant voltage supply |
0 |
Design of the electrical connection |
|
● for network components or terminal equipment |
RJ45-Port, 7-pole terminal block |
● for power supply |
3-pole terminal block |
Number of optical interfaces |
|
● for fiber optic cable / at 10 Mbit/s |
1 |
Design of the optical interface / for fiber optic cable |
|
● at 10 Mbit/s |
ST-Port (BFOC-Port) |
Range / at the optical interface / depending on the optical fiber used |
|
● minimum |
2 km |
● maximum |
2 km |
Supply voltage, current consumption, power loss |
product options / wide range power supply |
Yes |
Supply voltage / 1 / Rated value |
24 V |
● Supply voltage / 1 / Rated value |
18 ... 36 V |
● Type of voltage / 1 / of the supply voltage |
DC |
Supply voltage / 2 / Rated value |
48 V |
● Supply voltage / 2 / Rated value |
36 ... 59 V |
● Type of voltage / 2 / of the supply voltage |
DC |
Supply voltage / 3 / Rated value |
110 V |
● Supply voltage / 3 / Rated value |
88 ... 300 V |
● Type of voltage / 3 / of the supply voltage |
DC |
Supply voltage / 4 / Rated value |
|
● Supply voltage / 4 / Rated value |
85 ... 265 V |
● Type of voltage / 4 / of the supply voltage |
AC |
Product component / fusing at power supply input |
Yes |
Active power loss |
|
● maximum |
2 W |
Permitted ambient conditions |
Ambient temperature |
|
● during operation |
-40 ... +85 °C |
● during storage |
-40 ... +85 °C |
● during transport |
-40 ... +85 °C |
● Note |
A maximum operating temperature of +85 °C is permissible for a duration of 16 hours |
Relative humidity / at 25 °C / without condensation / during operation / maximum |
95 % |
Coating |
conformal coating optional |
Operating condition / fanless operation |
Yes |
Protection class IP |
IP40 |
Design, dimensions and weight |
Design |
compact |
Width |
58 mm |
Height |
109 mm |
Depth |
94 mm |
Net weight |
0.68 kg |
Material / of the enclosure |
21 AWG galvanized steel enclosure |
Mounting type |
|
● 35 mm DIN rail mounting |
Yes |
● S7-300 rail mounting |
No |
● 19-inch installation |
No |
● wall mounting |
Yes |
Product properties, functions, components / general |
Product component / Integrated / Ethernet switch |
No |
Product function |
|
● Modbus RTU to Modbus TCP conversion |
Yes |
Protocol / is supported |
|
● DNP3 |
Yes |
● GVRP |
No |
● HTTP |
Yes |
● Modbus TCP |
Yes |
● TFTP |
Yes |
Operating mode |
|
● multi-point |
Yes |
● Point-to-point |
Yes |
Product component / RS 485 terminating resistor |
Yes |
Product function |
|
● support several modbus masters |
Yes |
Protocol / is supported |
|
● PPP |
Yes |
● TIN |
Yes |
Product functions / management, configuration |
Product function |
|
● CLI |
Yes |
● RMON |
No |
● web-based management |
Yes |
Protocol / is supported / Telnet |
Yes |
Product functions / Diagnosis |
Protocol / is supported |
|
● SNMP v1 |
Yes |
● SNMP v2c |
Yes |
● SNMP v3 |
Yes |
Product function |
|
● MIB support |
Yes |
Product functions / VLAN |
Product function / VLAN - port based |
No |
Product functions / DHCP |
Product function |
|
● DHCP client |
Yes |
● DHCP Option 82 |
No |
Product functions / Redundancy |
Product function |
|
● redundancy procedure MSTP |
No |
● redundancy procedure RSTP |
No |
● eRSTP |
No |
Protocol / is supported |
|
● MSTP |
No |
● RSTP |
No |
Product functions / Security |
Product function |
|
● IEEE 802.1x (radius) |
No |
● RADIUS client |
Yes |
Protocol / is supported |
|
● SSL |
Yes |
● RADIUS |
Yes |
● TACACS+ |
Yes |
Key length |
|
● with SSL |
128 bit |
Product functions / Time |
Protocol / is supported |
|
● NTP |
No |
● SNTP |
Yes |
Product component |
|
● Hardware real-time clock |
Yes |
Standards, specifications, approvals |
Standard |
|
● for EMC |
FCC Part 15 (Class A), EN55022 (CISPR22 Class A) |
● for safety / from CSA and UL |
UL 60950-1, CSA C22.2 no. 60950-7 |
● for hazardous zone / from CSA and UL |
Hazardous Locations: Class 1 Division 2 |
● for emitted interference |
EN 61000-6-4 (Class A) |
● for interference immunity |
EN 61000-6-2 |
Laser protection class |
Complies with 21 CFR Chapter 1, Subchapter J |
Certificate of suitability |
EN 61000-6-2, EN 61000-6-10 |
● relating to NEMA |
TS 2 |
● CE marking |
Yes |
● C-Tick |
No |
● IEC 61850-3 |
Yes |
● IEEE 1613 |
Yes |
|
|
● product conformity / acc. to IEEE 802.3-10BaseT |
Yes |
● product conformity / acc. to IEEE 802.3x-Flow Control |
Yes |
● product conformity / RFC768-UDP |
Yes |
● product conformity / RFC783-TFTP |
Yes |
● product conformity / RFC791-IP |
Yes |
● product conformity / RFC792-ICMP |
Yes |
● product conformity / RFC793-TCP |
Yes |
● product conformity / RFC826-ARP |
Yes |
● product conformity / RFC854-Telnet |
Yes |
● product conformity / RFC894-IP over Ethernet |
Yes |
● product conformity / RFC1519-CIDR |
Yes |
● product conformity / RFC2030-SNTP |
Yes |
● product conformity / RFC2068-HTTP |
Yes |
● product conformity / RFC1541-DHCP (client) |
Yes |
● Product function / Transmission of serial data via IP-Networks |
Yes |
Further Information / Internet Links |
Internet-Link |
|
● to website: Industry Mall/RUGGEDCOM selector |
http://ruggedcom-selector.automation.siemens.com |
● to website: Siemens RUGGEDCOM |
http://siemens.com/ruggedcom |
● to website: Selector for cables and connectors |
http://www.siemens.com/snst |
● to website: Industrial communication |
http://www.siemens.com/simatic-net |
● to website: Industry Mall |
http://www.siemens.com/industrial-controls/mall |
● to website: Information and Download Center |
http://www.siemens.com/automation/net/catalog |
● to website: Image database |
http://automation.siemens.com/bilddb |
● to website: CAx Download Manager |
http://www.siemens.com/cax |
● to website: Industry Online Support |
http://support.automation.siemens.com |
Security information |
Security information |
Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4) |
last modified: |
27.10.2014 |
Date 30.10.2014 |
Changes preserved © Copyright Siemens AG 2014 |