| Product type designation |
SCALANCE X101-1FL |
| Product description |
|
|
SCALANCE X101-1FL IE MEDIA CONVERTER UNMANAGED 1 X 10MBIT/S RJ45 PORT, 1 X 10MBIT/S MULTIMODE BFOC, LED DIAGNOSIS, FAULT SIGNAL. CONTACT WITH SET BUTTON, REDUNDANT POWER SUPPLY, PROFINET COMPLIANT SLEEVE, INCL. ELECTRONIC MANUAL ON CD |
| Transmission rate |
| Transfer rate |
10 Mbit/s |
| Interfaces |
| Number of electrical/optical connections / for network components or terminal equipment / maximum |
2 |
| Number of electrical connections |
|
| ● for network components or terminal equipment |
1 |
| ● for signaling contact |
1 |
| ● for power supply |
1 |
| ● for redundant voltage supply |
1 |
| Design of the electrical connection |
|
| ● for network components or terminal equipment |
RJ45 port |
| ● for signaling contact |
2-pole terminal block |
| ● for power supply |
4-pole terminal block |
| Number of optical interfaces |
|
| ● for fiber optic cable / at 10 Mbit/s |
1 |
| Design of the optical interface |
|
| ● for fiber optic cable / at 10 Mbit/s |
BFOC port (multimode up to 5 km) |
| Connectable optical power relative to 1 mW |
|
| ● of the transmitter output / minimum |
-16 dB |
| ● of the transmitter output / maximum |
-9 dB |
| ● of the receiver input / maximum |
-8.2 dB |
| Optical sensitivity relating to 1 mW / of the receiver input / minimum |
-30.6 dB |
| Damping ratio / of the FOC transmission link / minimum necessary |
0 dB |
| Range / at the optical interface / depending on the optical fiber used |
0 ... 5 km |
| Signal-Inputs/outputs |
| Operating voltage / of the signaling contacts |
|
| ● for DC / Rated value |
24 V |
| Operating current / of the signaling contacts |
|
| ● for DC / maximum |
0.1 A |
| Supply voltage, current consumption, power loss |
| Supply voltage |
|
| ● external |
24 V |
| ● external |
18 ... 32 V |
| Type of voltage / of the supply voltage |
DC |
| Product component / fusing at power supply input |
Yes |
| Fuse protection type / at input for supply voltage |
0.5 A / 60 V |
| Consumed current |
|
| ● maximum |
0.12 A |
| Active power loss |
|
| ● for DC / at 24 V |
3 W |
| Permitted ambient conditions |
| Ambient temperature |
|
| ● during operation |
-10 ... +60 °C |
| ● during storage |
-40 ... +80 °C |
| ● during transport |
-40 ... +80 °C |
| Relative humidity / at 25 °C / without condensation / during operation / maximum |
95 % |
| Protection class IP |
IP30 |
| Design, dimensions and weight |
| Design |
Compact |
| Width |
40 mm |
| Height |
125 mm |
| Depth |
124 mm |
| Net weight |
0.55 kg |
| Mounting type |
|
| ● 35 mm DIN rail mounting |
Yes |
| ● S7-300 rail mounting |
Yes |
| ● wall mounting |
Yes |
| Product properties, functions, components / general |
| Product function / Parallel Redundancy Protocol (PRP) |
No |
| Standards, specifications, approvals |
| Standard |
|
| ● for FM |
FM3611: Class 1, Divison 2, Group A, B, C, D / T.., Class 1, Zone 2, Group IIC, T.. |
| ● for hazardous zone |
EN 600079-15 II 3 G EEx nA II T.. KEMA 06 ATEX 0021 X |
| ● for safety / from CSA and UL |
UL 60950-1, CSA C22.2 No. 60950-1 |
| ● for hazardous zone / from CSA and UL |
UL 1604 and UL 2279-15 (Hazardous Location), Class 1 / Division 2 / Group A, B, C, D / T.., Class 1 / Zone 2 / Group IIC / T.. |
| ● for emitted interference |
EN 61000-6-3 |
| ● for interference immunity |
EN 61000-6-4:2001 |
| Certificate of suitability |
EN 61000-6-2:2001, EN 61000-6-4:2001 |
| ● CE marking |
Yes |
| ● C-Tick |
Yes |
| ● KC approval |
Yes |
| Marine classification association |
|
| ● American Bureau of Shipping Europe Ltd. (ABS) |
Yes |
| ● Bureau Veritas (BV) |
Yes |
| ● Det Norske Veritas (DNV) |
Yes |
| ● Germanische Lloyd (GL) |
Yes |
| ● Lloyds Register of Shipping (LRS) |
Yes |
| ● Nippon Kaiji Kyokai (NK) |
Yes |
| ● Polski Rejestr Statkow (PRS) |
No |
| MTBF / at 40 °C |
134 y |
| Further Information / Internet Links |
| Internet-Link |
|
| ● to website: Selector SIMATIC NET SELECTION TOOL |
http://www.siemens.com/snst |
| ● to website: Industrial communication |
http://www.siemens.com/simatic-net |
| ● to website: Information and Download Center |
http://www.siemens.com/automation/net/catalog |
| ● to website: Image database |
http://automation.siemens.com/bilddb |
| ● to website: CAx Download Manager |
http://www.siemens.com/cax |
| ● to website: Industry Online Support |
http://support.automation.siemens.com |
| Security information |
| Security information |
Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action(e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4) |
| last modified: |
23.10.2014 |
Date
01.11.2014 |
Changes preserved
© Copyright Siemens AG 2014 |
