| Product type designation |
SCALANCE X112-2 |
| Product description |
|
|
SCALANCE X112-2, UNMANAGED IE SWITCH, 12 X 10/100MBIT/S RJ45 PORTS, 2 X 100MBIT/S MULTIMODE BFOC, LED-DIAGNOSIS, FAULT SIGNAL CONTACT WITH SET BUTTON, REDUNDAND POWER SUPPLY |
| Transmission rate |
| Transfer rate |
10 Mbit/s, 100 Mbit/s |
| Interfaces |
| Number of electrical/optical connections |
|
| ● for network components or terminal equipment / maximum |
14 |
| Number of electrical connections |
|
| ● for network components or terminal equipment |
12 |
| ● for signaling contact |
1 |
| ● for power supply |
1 |
| ● for redundant voltage supply |
1 |
| Design of the electrical connection |
|
| ● for network components or terminal equipment |
RJ45 port |
| ● for signaling contact |
2-pole terminal block |
| ● for power supply |
4-pole terminal block |
| Number of optical interfaces |
|
| ● for fiber optic cable / at 100 Mbit/s |
2 |
| Design of the optical interface |
|
| ● for fiber optic cable / at 100 Mbit/s |
BFOC sockets (multimode up to 5 km) |
| Connectable optical power relative to 1 mW |
|
| ● of the transmitter output / minimum |
-19 dB |
| ● of the transmitter output / maximum |
-14 dB |
| ● of the receiver input / maximum |
-14 dB |
| Optical sensitivity relating to 1 mW / of the receiver input / minimum |
-32 dB |
| Damping ratio / of the FOC transmission link / minimum necessary |
0 dB |
| Range / at the optical interface / depending on the optical fiber used |
0 ... 5 km |
| Signal-Inputs/outputs |
| Operating voltage / of the signaling contacts |
|
| ● for DC / Rated value |
24 V |
| Operating current / of the signaling contacts |
|
| ● for DC / maximum |
0.1 A |
| Supply voltage, current consumption, power loss |
| Type of voltage / of the supply voltage |
DC |
| Supply voltage |
|
| ● external |
24 V |
| ● external |
18 ... 32 V |
| Product component / fusing at power supply input |
No |
| Consumed current / maximum |
0.45 A |
| Active power loss |
|
| ● for DC / at 24 V |
5.16 W |
| Permitted ambient conditions |
| Ambient temperature |
|
| ● during operation |
-10 ... +70 °C |
| ● during storage |
-40 ... +80 °C |
| ● during transport |
-40 ... +80 °C |
| Relative humidity |
|
| ● at 25 °C / without condensation / during operation / maximum |
95 % |
| Protection class IP |
IP30 |
| Design, dimensions and weight |
| Design |
compact |
| Width |
120 mm |
| Height |
125 mm |
| Depth |
124 mm |
| Net weight |
1.1 kg |
| Mounting type |
|
| ● 35 mm DIN rail mounting |
Yes |
| ● wall mounting |
Yes |
| ● S7-300 rail mounting |
Yes |
| ● S7-1500 rail mounting |
No |
| Product functions / management, configuration |
| Product function |
|
| ● multiport mirroring |
No |
| ● switch-managed |
No |
| Standards, specifications, approvals |
| Standard |
|
| ● for FM |
FM3611: Class 1, Divison 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4 |
| ● for hazardous zone |
EN 60079-0:2009, EN60079-15:2010, II 3 G Ex nA IIC T4 Gc, KEMA 07ATEX0145 X |
| ● for safety / from CSA and UL |
UL 60950-1, CSA C22.2 No. 60950-1 |
| ● for hazardous zone / from CSA and UL |
UL 1604 and UL 2279-15 (Hazardous Location), Class 1 / Division 2 / Group A, B, C, D / T.., Class 1 / Zone 2 / Group IIC / T.. |
| ● for emitted interference |
EN 61000-6-4:2001 |
| ● for interference immunity |
EN 61000-6-2:2001 |
| Certificate of suitability |
EN 61000-6-2:2001, EN 61000-6-4:2001 |
| ● CE marking |
Yes |
| ● C-Tick |
Yes |
| ● KC approval |
Yes |
| Marine classification association |
|
| ● American Bureau of Shipping Europe Ltd. (ABS) |
Yes |
| ● Bureau Veritas (BV) |
Yes |
| ● Det Norske Veritas (DNV) |
Yes |
| ● Germanische Lloyd (GL) |
Yes |
| ● Lloyds Register of Shipping (LRS) |
Yes |
| ● Nippon Kaiji Kyokai (NK) |
Yes |
| ● Polski Rejestr Statkow (PRS) |
Yes |
| ● Royal Institution of Naval Architects (RINA) |
Yes |
| MTBF / at 40 °C |
61.3 y |
| Further Information / Internet Links |
| Internet-Link |
|
| ● to website: Selector SIMATIC NET SELECTION TOOL |
http://www.siemens.com/snst |
| ● to website: Industrial communication |
http://www.siemens.com/simatic-net |
| ● to website: Information and Download Center |
http://www.siemens.com/automation/net/catalog |
| ● to website: Image database |
http://automation.siemens.com/bilddb |
| ● to website: CAx Download Manager |
http://www.siemens.com/cax |
| ● to website: Industry Online Support |
http://support.automation.siemens.com |
| Security information |
| Security information |
Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit http://www.siemens.com/industrialsecurity. To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit http://support.automation.siemens.com. (V3.4) |
| last modified: |
23.10.2014 |
Date
31.10.2014 |
Changes preserved
© Copyright Siemens AG 2014 |
