 |
|
| Supply voltage |
| Load voltage L+ |
| ● Rated value (DC) |
24 V |
| Input current |
| from load voltage L+ (without load), max. |
80 mA |
| from backplane bus 5 V DC, max. |
60 mA |
| Power loss |
| Power loss, typ. |
2 W |
| Analog inputs |
| Number of analog inputs |
4 |
| Number of analog inputs for voltage measurement |
2 |
| Number of analog inputs for resistance measurement |
4 |
| Cycle time (all channels) max. |
85 ms |
| Input ranges |
| ● Voltage |
Yes |
| ● Resistance thermometer |
Yes |
| ● Resistance |
Yes |
| Input ranges (rated values), voltages |
| ● 0 to +10 V |
Yes |
| ● Input resistance (0 to 10 V) |
100 kΩ |
| Input ranges (rated values), resistance thermometers |
| ● Pt 100 |
Yes; only climatic range |
| Input ranges (rated values), resistors |
| ● 0 to 10000 Ohm |
Yes |
| Analog outputs |
| Number of analog outputs |
2 |
| Voltage output, short-circuit protection |
Yes |
| Voltage output, short-circuit current, max. |
10 mA |
| Output ranges, voltage |
| ● 0 to 10 V |
Yes |
| Load impedance (in rated range of output) |
| ● with voltage outputs, min. |
2.5 kΩ |
| ● with voltage outputs, capacitive load, max. |
1 µF |
| Cable length |
| ● Cable length, shielded, max. |
100 m |
| Analog value generation |
| Integration and conversion time/resolution per channel |
| ● Resolution with overrange (bit including sign), max. |
12 bit |
| ● Integration time, ms |
85 ms |
| Settling time |
| ● for resistive load |
0.8 ms |
| ● for capacitive load |
0.8 ms |
| Encoder |
| Connection of signal encoders |
| ● for resistance measurement with two-wire connection |
Yes |
| ● for resistance measurement with three-wire connection |
Yes |
| ● for resistance measurement with four-wire connection |
Yes |
| Errors/accuracies |
| Operational error limit in overall temperature range |
| ● Voltage, relative to input area, (+/-) |
0.7 % |
| ● Resistance, relative to input area, (+/-) |
3.5 % |
| ● Resistance thermometer, relative to input area, (+/-) |
1 % |
| ● Voltage, relative to output area, (+/-) |
1 % |
| Basic error limit (operational limit at 25 °C) |
| ● Voltage, relative to input area, (+/-) |
0.5 % |
| ● Resistance, relative to input area, (+/-) |
2.8 % |
| ● Resistance thermometer, relative to input area, (+/-) |
0.8 % |
| ● Voltage, relative to output area, (+/-) |
0.85 % |
| Galvanic isolation |
| Galvanic isolation analog inputs |
| ● between the channels and the backplane bus |
Yes |
| Galvanic isolation analog outputs |
| ● between the channels and the backplane bus |
Yes |
| Isolation |
| Isolation tested with |
500 V DC |
| Connection method |
| required front connector |
20-pin |
| Dimensions |
| Width |
40 mm |
| Height |
125 mm |
| Depth |
120 mm |
| Weights |
| Weight, approx. |
200 g |
| last modified: |
31.07.2014 |
