 |
SIMATIC DP, HART ANALOG OUTPUT SM 332, 8AO, 0/4 - 20MA HART, FOR ET200M WITH IM153-2, 20 PIN FEATURES: FW UPDATE, HART SECONDARY VARIABLES, REDUNDANCY, LOCAL DIAGNOSTIC BUFFER WITH TIMESTAMP, |
| Supply voltage |
| Load voltage L+ |
| ● Rated value (DC) |
24 V |
| ● Reverse polarity protection |
Yes |
| Input current |
| from load voltage L+ (without load), max. |
350 mA |
| from backplane bus 5 V DC, max. |
110 mA |
| Power loss |
| Power loss, typ. |
6 W |
| Analog outputs |
| Number of analog outputs |
8 |
| Current output, no-load voltage, max. |
24 V |
| Output ranges, current |
| ● 0 to 20 mA |
Yes |
| ● -20 to +20 mA |
No |
| ● 4 to 20 mA |
Yes |
| Connection of actuators |
| ● for current output two-wire connection |
Yes |
| Load impedance (in rated range of output) |
| ● with current outputs, max. |
750 Ω |
| ● with current outputs, inductive load, max. |
10 mH |
| Destruction limits against externally applied voltages and currents |
| ● Voltages at the outputs towards MANA |
+60/-0.5 V |
| Cable length |
| ● Cable length, shielded, max. |
800 m |
| Analog value generation |
| Integration and conversion time/resolution per channel |
| ● Resolution with overrange (bit including sign), max. |
16 bit |
| Settling time |
| ● for resistive load |
0.1 ms |
| ● for inductive load |
0.5 ms |
| Errors/accuracies |
| Output ripple (based on output area, bandwidth 0 to 50 kHz), (+/-) |
0.02 % |
| Linearity error (relative to output range), (+/-) |
0.01 % |
| Temperature error (relative to output range), (+/-) |
0.002 %/K |
| Crosstalk between the outputs, min. |
70 dB |
| Repeat accuracy in steady state at 25 °C (relative to output area), (+/-) |
0.05 % |
| Operational error limit in overall temperature range |
| ● Current, relative to output area, (+/-) |
0.2 % |
| Basic error limit (operational limit at 25 °C) |
| ● Current, relative to output area, (+/-) |
0.1 % |
| Interrupts/diagnostics/status information |
| Substitute values connectable |
Yes |
| Alarms |
| ● Diagnostic alarm |
Yes |
| Diagnostic messages |
| ● Diagnostic functions |
Yes |
| ● Diagnostic information readable |
Yes |
| ● Diagnostics |
Yes |
| Diagnostics indication LED |
| ● Group error SF (red) |
Yes |
| Galvanic isolation |
| Galvanic isolation analog outputs |
| ● between the channels |
No |
| ● between the channels and the backplane bus |
Yes |
| ● between the channels and the load voltage L+ |
Yes |
| Isolation |
| Isolation tested with |
500 V DC |
| Connection method |
| required front connector |
20-pin |
| Dimensions |
| Width |
40 mm |
| Height |
125 mm |
| Depth |
117 mm |
| Weights |
| Weight, approx. |
220 g |
| last modified: |
21.08.2014 |
