 |
SIMATIC S7, ANALOG INPUT SM336, 6 AI; 14 BIT; 40 PIN, FAILSAFE ANALOG INPUTS FOR SIMATIC S7F SYSTEMS WITH DIAGNOST. INTERRUPT |
| Supply voltage |
| Load voltage L+ |
| ● Rated value (DC) |
24 V |
| ● Reverse polarity protection |
Yes |
| Input current |
| from backplane bus 5 V DC, max. |
90 mA |
| from supply voltage L+, max. |
160 mA; Typical |
| Power losses |
| Power loss, typ. |
4.25 W |
| Analog inputs |
| Number of analog inputs |
6 |
| Number of analog inputs for voltage measurement |
4 |
| permissible input voltage for voltage input (destruction limit), max. |
30 V |
| permissible input current for current input (destruction limit), max. |
40 mA |
| Input ranges |
| ● Voltage |
Yes |
| ● Current |
Yes |
| Input ranges (rated values), voltages |
| ● 0 to +10 V |
Yes |
| ● Input resistance (0 to 10 V) |
59 kΩ |
| Input ranges (rated values), currents |
| ● 0 to 20 mA |
Yes |
| ● Input resistance (0 to 20 mA) |
107 Ω |
| ● 4 to 20 mA |
Yes |
| ● Input resistance (4 to 20 mA) |
107 Ω |
| Cable length |
| ● Cable length, shielded, max. |
200 m |
| Analog value creation |
| Integration and conversion time/resolution per channel |
| ● Resolution with overrange (bit including sign), max. |
14 bit |
| ● Integration time, ms |
20 ms (at 50 Hz); 16.66 ms (at 60 Hz) |
| ● Interference voltage suppression for interference frequency f1 in Hz |
38 dB |
| Encoder |
| Connection of signal encoders |
| ● for current measurement as 2-wire transducer |
Yes |
| ● for current measurement as 4-wire transducer |
Yes |
| Errors/accuracies |
| Operational limit in overall temperature range |
| ● Voltage, relative to input area, (+/-) |
0.48 % |
| ● Current, relative to input area, (+/-) |
0.48 % |
| Basic error limit (operational limit at 25 °C) |
| ● Voltage, relative to input area, (+/-) |
0.4 % |
| ● Current, relative to input area, (+/-) |
0.4 % |
| Interrupts/diagnostics/status information |
| Alarms |
| ● Diagnostic alarm |
Yes; Parameterizable |
| Diagnostic messages |
| ● Diagnostic functions |
Yes |
| ● Diagnostic information readable |
Yes |
| Diagnostics indication LED |
| ● Fail-safe operation |
Yes |
| ● Group error SF (red) |
Yes |
| ● Monitoring 24 V voltage supply ON (green) |
Yes; Encoder supply |
| Galvanic isolation |
| Galvanic isolation analog inputs |
| ● between the channels |
No |
| ● between the channels and the backplane bus |
Yes |
| ● between the channels and the power supply of the electronics |
Yes; only if sensors are externally supplied |
| Isolation |
| Isolation checked with |
500V DC/350V AC |
| Standards, approvals, certificates |
| Highest safety class achievable in safety mode |
| ● acc. to DIN V 19250 |
AK 6 |
| ● acc. to EN 954 |
Cat. 4 |
| ● acc. to IEC 61508 |
SIL 3 |
| Connection method |
| required front connector |
40-pin |
| Dimensions |
| Width |
80 mm |
| Height |
125 mm |
| Depth |
120 mm |
| Weights |
| Weight, approx. |
480 g |
| last modified: |
08.09.2014 |
