 |
SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 8 AE; +/-5/10V, 1-5 V, +/-20MA, 0/4 TO 20MA, 16 BIT (55 MS), 1 COMMON POINT(50 V COM.), 1 X 40 PIN |
Input current |
from backplane bus 5 V DC, max. |
130 mA |
Power losses |
Power loss, typ. |
0.6 W |
Analog inputs |
Number of analog inputs |
8 |
permissible input voltage for voltage input (destruction limit), max. |
50 V; Permanent |
permissible input current for current input (destruction limit), max. |
32 mA |
Input ranges |
● Voltage |
Yes |
● Current |
Yes |
● Thermocouple |
No |
● Resistance thermometer |
No |
● Resistance |
No |
Input ranges (rated values), voltages |
● 0 to +10 V |
No |
● 1 to 5 V |
Yes |
● Input resistance (1 to 5 V) |
2 MΩ |
● 1 to 10 V |
No |
● -1 V to +1 V |
No |
● -10 V to +10 V |
Yes |
● Input resistance (-10 V to +10 V) |
2 MΩ |
● -2.5 V to +2.5 V |
No |
● -250 mV to +250 mV |
No |
● -5 V to +5 V |
Yes |
● Input resistance (-5 V to +5 V) |
2 MΩ |
● -50 mV to +50 mV |
No |
● -500 mV to +500 mV |
No |
● -80 mV to +80 mV |
No |
Input ranges (rated values), currents |
● 0 to 20 mA |
Yes |
● Input resistance (0 to 20 mA) |
250 Ω |
● -10 to +10 mA |
No |
● -20 to +20 mA |
Yes |
● Input resistance (-20 to +20 mA) |
250 Ω |
● -3.2 to +3.2 mA |
No |
● 4 to 20 mA |
Yes |
● Input resistance (4 to 20 mA) |
250 Ω |
Input ranges (rated values), thermoelements |
● Type B |
No |
● Type E |
No |
● Type J |
No |
● Type K |
No |
● Type L |
No |
● Type N |
No |
● Type R |
No |
● Type S |
No |
● Type T |
No |
● Type U |
No |
● Type TXK/TXK(L) to GOST |
No |
Input ranges (rated values), resistance thermometer |
● Cu 10 |
No |
● Ni 100 |
No |
● Ni 1000 |
No |
● LG-Ni 1000 |
No |
● Ni 120 |
No |
● Ni 200 |
No |
● Ni 500 |
No |
● Pt 100 |
No |
● Pt 1000 |
No |
● Pt 200 |
No |
● Pt 500 |
No |
Input ranges (rated values), resistors |
● 0 to 150 ohms |
No |
● 0 to 300 ohms |
No |
● 0 to 600 ohms |
No |
● 0 to 6000 ohms |
No |
Cable length |
● Cable length, shielded, max. |
200 m |
Analog value creation |
Measurement principle |
integrating |
Integration and conversion time/resolution per channel |
● Resolution with overrange (bit including sign), max. |
16 bit; Unipolar: 15/15/15/15 bits; bipolar: 15 bits + sign/15 bits + sign/15 bits + sign/15 bits + sign |
● Integration time, parameterizable |
Yes; 10/ 16.67/ 20/ 100 ms |
● Interference voltage suppression for interference frequency f1 in Hz |
400 / 60 / 50 / 10 Hz |
Encoder |
Connection of signal encoders |
● for current measurement as 2-wire transducer |
Yes; with external transmitter; possible with separate supply for transmitter |
● for current measurement as 4-wire transducer |
Yes |
Errors/accuracies |
Operational limit in overall temperature range |
● Voltage, relative to input area, (+/-) |
0.1 %; At Ucm = 0 V or ±0.7 % at Ucm = 50 V |
● Current, relative to input area, (+/-) |
0.3 %; At Ucm = 0 V or ±0.9 % at Ucm = 50 V |
Basic error limit (operational limit at 25 °C) |
● Voltage, relative to input area, (+/-) |
0.05 % |
● Current, relative to input area, (+/-) |
0.05 % |
Isochronous mode |
Isochronous operation (application synchronized up to terminal) |
No |
Interrupts/diagnostics/status information |
Alarms |
● Diagnostic alarm |
Yes; Parameterizable |
● Limit value alarm |
Yes; Parameterizable, channels 0 and 2 |
Diagnostic messages |
● Diagnostic functions |
Yes; Parameterizable |
● Diagnostic information readable |
Yes |
● Diagnostics |
Yes |
Diagnostics indication LED |
● Group error SF (red) |
Yes |
Galvanic isolation |
Galvanic isolation analog inputs |
● between the channels |
No |
● between the channels, in groups of |
2 |
● between the channels and the backplane bus |
Yes |
Isolation |
Isolation checked with |
500 V DC |
Connection method |
required front connector |
40-pin |
Dimensions |
Width |
40 mm |
Height |
125 mm |
Depth |
120 mm |
Weights |
Weight, approx. |
272 g |
last modified: |
25.09.2014 |