 |
|
| General information |
| Hardware product version |
02 |
| Firmware version |
V2.3.0 |
| Engineering with |
| ● Programming package |
STEP 7 V5.3 or higher |
| Supply voltage |
| external protection for power supply lines (recommendation) |
2 A min. |
| Memory |
| Backup |
| ● present |
Guaranteed by MMC (maintenance-free) |
| ● without battery |
Program and data |
| CPU-blocks |
| Number of blocks (total) |
(DBs, FCs, FBs OBs, SDBs); the maximum number of loadable blocks can be reduced by the MMC being used. |
| DB |
| ● Number, max. |
Number band: 1 to 2047 |
| FB |
| ● Number, max. |
Number range: 0 to 2047 |
| FC |
| ● Number, max. |
Number range: 0 to 2047 |
| OB |
| ● Number, max. |
see instruction list |
| ● Number of free cycle OBs |
OB 1 |
| ● Number of time alarm OBs |
OB 10 |
| ● Number of delay alarm OBs |
OB 20, 21 |
| ● Number of time interrupt OBs |
OB 32, 33, 34, 35 |
| ● Number of process alarm OBs |
OB 40 |
| ● Number of startup OBs |
OB 100 |
| ● Number of asynchronous error OBs |
OB 80 |
| ● Number of synchronous error OBs |
OB 121, 122 |
| Counters, timers and their retentivity |
| S7 counter |
| of which retentive without battery |
| — preset |
Z 0 to Z 7 |
| IEC counter |
| ● Type |
SFB |
| ● Number |
Unlimited (limited only by RAM capacity) |
| S7 times |
| Retentivity |
| — preset |
No retentivity |
| IEC timer |
| ● Type |
SFB |
| ● Number |
Unlimited (limited only by RAM capacity) |
| Data areas and their retentivity |
| retentive data area, total |
All, max. 256 KB |
| Flag |
| ● Retentivity available |
From MB 0 to MB 4095 |
| ● Retentivity preset |
MB 0 to MB 15 |
| ● Number of clock memories |
1 memory byte |
| Data blocks |
| ● Number, max. |
from DB 1 to DB 2047 |
| ● Retentivity adjustable |
via non-retain property on DB |
| ● Retentivity preset |
Yes |
| Time of day |
| Clock |
| ● Backup time |
At 40 °C ambient temperature |
| Operating hours counter |
| ● Number/Number range |
0 to 3 |
| ● Range of values |
0 to 2^31 hours (when using SFC 101) |
| ● Granularity |
1 hour |
| ● retentive |
Must be restarted at each restart |
| 1. Interface |
| Interface type |
Integrated RS 485 interface |
| Physics |
RS 485 |
| DP slave |
| ● automatic baud rate search |
only with passive interface |
| Services |
| — Routing |
with interface active |
| 2. Interface |
| Interface type |
PROFINET |
| Physics |
RJ45 |
| automatic detection of transmission rate |
10/100 Mbit/s |
| Functionality |
| ● PROFINET IO Controller |
Firmware Status V2.3 or higher |
| PROFINET IO Controller |
| ● Updating time |
1 to 512 ms (minimum value depends on communication share set for PROFINET I/O, on the number of I/O devices, and on the volume of configured user data) |
| Services |
| — S7 communication |
with loadable FBs, max. configurable connections: 16 |
| — Open IE communication |
via TCP/IP |
| Communication functions |
| S7 basic communication |
| ● User data per job (of which consistent), max. |
76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server) |
| S7 communication |
| ● as client |
via integrated PROFINET interface and loadable FB or via CP and loadable FB |
| ● User data per job, max. |
See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication) |
| S5 compatible communication |
| ● supported |
via CP and loadable FC |
| Open IE communication |
| ● TCP/IP |
via integrated PROFINET interface and loadable FBs |
| PROFINET CBA (at set setpoint communication load) |
| HMI variables via PROFINET (acyclic) |
| — Number of stations that can log on for HMI variables (PN OPC/iMap) |
2x PN OPC/1x iMap |
| PROFIBUS proxy functionality |
| — Data length per connection, max. |
Slave-dependent |
| S7 message functions |
| Number of login stations for message functions, max. |
Depending on the configured connections for PG/OP and S7 basic communication |
| Test commissioning functions |
| Status/control |
| ● Variables |
Inputs, outputs, memory bits, DB, times, counters |
| Forcing |
| ● Forcing, variables |
Inputs, outputs |
| Configuration |
| Configuration software |
| ● STEP 7 |
V5.3 or higher |
| Programming |
| ● Command set |
see instruction list |
| ● System functions (SFC) |
see instruction list |
| ● System function blocks (SFB) |
see instruction list |
| last modified: |
21.08.2014 |
