 |
SIMATIC S7-300, CPU 315T-2 DP, CENTRAL PROCESSING UNIT FOR PLC AND TECHNOLOGY 128 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S 2. INTERFACE DP(DRIVE), INTEGRATED I/O FOR TECHNOLOGY FRONT CONNECTOR (1 X 40PIN) AND MICRO MEMORY CARD MIN. 4MB NECESSARY |
| General information |
| Hardware product version |
01 |
| Firmware version |
CPU: V2.3.1, integrated technology: V3.1.1 |
| Engineering with |
| ● Programming package |
STEP 7 V 5.3 SP1 or higher and S7-Technology option package V2.0 |
| Supply voltage |
| 24 V DC |
Yes |
| permissible range, lower limit (DC) |
20.4 V |
| permissible range, upper limit (DC) |
28.8 V |
| external protection for power supply lines (recommendation) |
2 A min. |
| Load voltage L+ |
| ● Rated value (DC) |
24 V |
| ● Reverse polarity protection |
No |
| Input current |
| Current consumption (in no-load operation), typ. |
200 mA |
| Inrush current, max. |
2.5 A |
| I²t |
1 A²·s |
| Power loss |
| Power loss, typ. |
6 W |
| Memory |
| Work memory |
| ● integrated |
128 kbyte |
| ● expandable |
No |
| Load memory |
| ● Plug-in (MMC) |
Yes |
| ● Plug-in (MMC), max. |
8 Mbyte |
| ● Data management on MMC (after last programming), min. |
10 y |
| Backup |
| ● present |
Yes; Guaranteed by MMC (maintenance-free) |
| Battery |
| Backup battery |
| ● Backup time, max. |
10 y; Data retention on the MMC (after last programming) |
| CPU processing times |
| for bit operations, typ. |
0.1 µs |
| for bit operations, max. |
0.1 µs |
| for word operations, typ. |
0.2 µs |
| for fixed point arithmetic, typ. |
2 µs |
| for floating point arithmetic, typ. |
3 µs |
| CPU-blocks |
| Number of blocks (total) |
1 024 |
| DB |
| ● Number, max. |
1 023; DB 0 reserved |
| ● Size, max. |
16 kbyte |
| FB |
| ● Number, max. |
2 048; see instruction list |
| ● Size, max. |
16 kbyte |
| FC |
| ● Number, max. |
2 048; see instruction list |
| ● Size, max. |
16 kbyte |
| OB |
| ● Number, max. |
see instruction list |
| ● Size, max. |
16 kbyte |
| ● Number of free cycle OBs |
1 |
| ● Number of time alarm OBs |
1 |
| ● Number of delay alarm OBs |
1 |
| ● Number of time interrupt OBs |
1 |
| ● Number of process alarm OBs |
1 |
| ● Number of startup OBs |
1 |
| ● Number of asynchronous error OBs |
1 |
| ● Number of synchronous error OBs |
2 |
| Nesting depth |
| ● per priority class |
8 |
| ● additional within an error OB |
4 |
| Counters, timers and their retentivity |
| S7 counter |
| ● Number |
256 |
| of which retentive without battery |
| — adjustable |
Yes |
| — preset |
Z 0 to Z 7 |
| Counting range |
| — adjustable |
Yes |
| — lower limit |
0 |
| — upper limit |
999 |
| IEC counter |
| ● present |
Yes |
| ● Type |
SFB |
| ● Number |
Unlimited (limited only by RAM capacity) |
| S7 times |
| ● Number |
256 |
| Retentivity |
| — adjustable |
Yes |
| — preset |
No retentivity |
| Time range |
| — lower limit |
10 ms |
| — upper limit |
9 990 s |
| IEC timer |
| ● present |
Yes |
| ● Type |
SFB |
| ● Number |
Unlimited (limited only by RAM capacity) |
| Data areas and their retentivity |
| retentive data area, total |
1024 (DBs, FCs, FBs). The maximum number of loadable blocks can be reduced by the MMC that you use. |
| Flag |
| ● Number, max. |
2 048 byte |
| ● Retentivity available |
Yes; MB 0 to MB 2047 |
| ● Retentivity preset |
MB 0 to MB 15 |
| ● Number of clock memories |
8; 1 memory byte |
| Data blocks |
| ● Number, max. |
1 023; DB 0 reserved |
| ● Size, max. |
16 kbyte |
| ● Retentivity adjustable |
Yes |
| Local data |
| ● per priority class, max. |
1 024 byte |
| Address area |
| I/O address area |
| ● Inputs |
2 kbyte |
| ● Outputs |
2 kbyte |
| of which distributed |
| — Inputs |
2 kbyte |
| — Outputs |
2 kbyte |
| Process image |
| ● Inputs |
128 byte |
| ● Outputs |
128 byte |
| Digital channels |
| ● Inputs |
16 384 |
| ● Outputs |
16 384 |
| ● Inputs, of which central |
256 |
| ● Outputs, of which central |
256 |
| Analog channels |
| ● Inputs |
1 024 |
| ● Outputs |
1 024 |
| ● Inputs, of which central |
64 |
| ● Outputs, of which central |
64 |
| Hardware configuration |
| Number of DP masters |
| ● integrated |
2; 1 DP and 1 DP (drive) |
| ● via CP |
2; for DP |
| Number of operable FMs and CPs (recommended) |
| ● FM |
8 |
| ● CP, point-to-point |
8 |
| ● CP, LAN |
10 |
| Rack |
| ● Racks, max. |
1 |
| ● Modules per rack, max. |
8 |
| Time of day |
| Clock |
| ● Hardware clock (real-time clock) |
Yes |
| ● battery-backed and synchronizable |
Yes |
| ● Deviation per day, max. |
10 s |
| ● Backup time |
6 wk; At 40 °C ambient temperature |
| Operating hours counter |
| ● Number |
1 |
| ● Number/Number range |
0 |
| ● Range of values |
0 to 2^31 hours (when using SFC 101) |
| ● Granularity |
1 hour |
| ● retentive |
Yes; Must be restarted at each restart |
| Clock synchronization |
| ● supported |
Yes |
| ● to MPI, master |
Yes |
| ● to MPI, slave |
Yes |
| ● in AS, master |
Yes |
| ● in AS, slave |
Yes |
| Digital inputs |
| Number of digital inputs |
4 |
| Functions |
technological functions, e.g. reference point detection (BERO); digital inputs can also be used (with restrictions) in STEP 7 user program. |
| Input characteristic curve in accordance with IEC 61131, type 1 |
Yes |
| Number of simultaneously controllable inputs |
| all mounting positions |
| — up to 40 °C, max. |
4 |
| — up to 60 °C, max. |
4 |
| Input voltage |
| ● Rated value, DC |
24 V |
| ● for signal "1" |
15 to 30 V |
| Input current |
| ● for signal "1", typ. |
7 mA |
| Input delay (for rated value of input voltage) |
| for counter/technological functions |
| — at "0" to "1", max. |
10 µs; Typical |
| — at "1" to "0", max. |
10 µs; Typical |
| Cable length |
| ● Cable length, shielded, max. |
1 000 m |
| ● Cable length unshielded, max. |
600 m |
| Digital outputs |
| Number of digital outputs |
8 |
| Functions |
For technology functions, e.g. high-speed cam switch signals |
| Short-circuit protection |
Yes |
| ● Response threshold, typ. |
1,0 A |
| Limitation of inductive shutdown voltage to |
2L+ (-48 V) |
| Controlling a digital input |
No |
| Switching capacity of the outputs |
| ● Lamp load, max. |
5 W |
| Load resistance range |
| ● lower limit |
48 Ω |
| ● upper limit |
4 kΩ |
| Output voltage |
| ● for signal "0", max. |
3 V |
| ● for signal "1", min. |
2L+ (-2,5 V) |
| Output current |
| ● for signal "1" rated value |
0.5 A |
| ● for signal "1" permissible range for 0 to 60 °C, min. |
5 mA |
| ● for signal "1" permissible range for 0 to 60 °C, max. |
0.6 A |
| ● for signal "0" residual current, max. |
0.3 mA |
| Parallel switching of 2 outputs |
| ● for uprating |
No |
| ● for redundant control of a load |
No |
| Switching frequency |
| ● with resistive load, max. |
100 Hz |
| ● with inductive load, max. |
0.2 Hz; to IEC 947-5-1, DC-13 |
| ● on lamp load, max. |
100 Hz |
| Total current of the outputs (per group) |
| horizontal installation |
| — up to 40 °C, max. |
4 A |
| — up to 60 °C, max. |
3 A |
| all other mounting positions |
| — up to 40 °C, max. |
3 A |
| Cable length |
| ● Cable length, shielded, max. |
1 000 m |
| ● Cable length unshielded, max. |
600 m |
| Encoder |
| Connectable encoders |
| ● 2-wire sensor |
No |
| 1. Interface |
| Interface type |
Integrated RS 485 interface |
| Physics |
RS 485 |
| isolated |
Yes |
| Power supply to interface (15 to 30 V DC), max. |
200 mA |
| Functionality |
| ● MPI |
Yes |
| ● DP master |
Yes |
| ● DP slave |
Yes |
| ● Point-to-point connection |
No |
| MPI |
| ● Transmission rate, max. |
12 Mbit/s |
| Services |
| — PG/OP communication |
Yes |
| — Routing |
Yes |
| — Global data communication |
Yes |
| — S7 basic communication |
Yes |
| — S7 communication |
Yes |
| — S7 communication, as client |
Yes; Via CP and loadable FB |
| — S7 communication, as server |
Yes |
| DP master |
| ● Transmission rate, max. |
12 Mbit/s |
| ● Number of DP slaves, max. |
124 |
| Services |
| — PG/OP communication |
Yes |
| — Routing |
Yes |
| — Global data communication |
No |
| — S7 basic communication |
No |
| — S7 communication |
No |
| — Equidistance mode support |
Yes |
| — SYNC/FREEZE |
Yes |
| — DPV1 |
Yes |
| Address area |
| — Inputs, max. |
244 kbyte; KB --> 244 bytes per DP slave |
| — Outputs, max. |
244 kbyte; KB --> 244 bytes per DP slave |
| DP slave |
| ● Transmission rate, max. |
12 Mbit/s |
| ● automatic baud rate search |
No |
| ● Address area, max. |
32 |
| ● User data per address area, max. |
32 byte |
| Services |
| — Routing |
Yes |
| — Global data communication |
No |
| — S7 basic communication |
No |
| — S7 communication |
No |
| — Direct data exchange (slave-to-slave communication) |
Yes |
| — DPV1 |
No |
| Transfer memory |
| — Inputs |
244 byte |
| — Outputs |
244 byte |
| 2. Interface |
| Interface type |
Integrated RS 485 interface |
| Physics |
RS 485 |
| isolated |
Yes |
| Power supply to interface (15 to 30 V DC), max. |
200 mA |
| Functionality |
| ● MPI |
No |
| ● DP master |
Yes; DP(DRIVE)-Master |
| ● DP slave |
No |
| ● Point-to-point connection |
No |
| DP master |
| ● Transmission rate, max. |
12 Mbit/s |
| ● Number of DP slaves, max. |
32 |
| Services |
| — PG/OP communication |
No |
| — Routing |
No |
| — Global data communication |
No |
| — S7 basic communication |
No |
| — S7 communication |
No |
| — Equidistance mode support |
Yes |
| — SYNC/FREEZE |
No |
| — Activation/deactivation of DP slaves |
No |
| — DPV1 |
No |
| Address area |
| — Inputs, max. |
244 kbyte; KB --> 244 bytes per DP slave |
| — Outputs, max. |
244 kbyte; KB --> 244 bytes per DP slave |
| Communication functions |
| PG/OP communication |
Yes |
| Global data communication |
| ● supported |
Yes |
| ● Number of GD loops, max. |
8 |
| ● Number of GD packets, max. |
8 |
| ● Number of GD packets, transmitter, max. |
8 |
| ● Number of GD packets, receiver, max. |
8 |
| ● Size of GD packets, max. |
22 byte |
| ● Size of GD packet (of which consistent), max. |
22 byte |
| S7 basic communication |
| ● supported |
Yes |
| ● User data per job, max. |
76 byte |
| ● User data per job (of which consistent), max. |
76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server) |
| S7 communication |
| ● supported |
Yes |
| ● as server |
Yes |
| ● as client |
Yes; Via CP and loadable FB |
| ● User data per job, max. |
180 byte; With PUT/GET |
| ● User data per job (of which consistent), max. |
64 byte; as server |
| S5 compatible communication |
| ● supported |
Yes; via CP and loadable FC |
| Number of connections |
| ● overall |
16 |
| ● usable for PG communication |
15 |
| — reserved for PG communication |
1 |
| — adjustable for PG communication, min. |
1 |
| — adjustable for PG communication, max. |
15 |
| ● usable for OP communication |
15 |
| — reserved for OP communication |
1 |
| — adjustable for OP communication, min. |
1 |
| — adjustable for OP communication, max. |
15 |
| ● usable for S7 basic communication |
12 |
| — reserved for S7 basic communication |
0 |
| — adjustable for S7 basic communication, min. |
0 |
| — adjustable for S7 basic communication, max. |
12 |
| S7 message functions |
| Number of login stations for message functions, max. |
16; Depending on the configured connections for PG/OP and S7 basic communication |
| Process diagnostic messages |
Yes |
| simultaneously active Alarm-S blocks, max. |
40 |
| Test commissioning functions |
| Status block |
Yes |
| Single step |
Yes |
| Number of breakpoints |
2 |
| Status/control |
| ● Status/control variable |
Yes |
| ● Variables |
Inputs, outputs, memory bits, DB, times, counters |
| ● Number of variables, max. |
30 |
| ● of which status variables, max. |
30 |
| ● of which control variables, max. |
14 |
| Forcing |
| ● Forcing |
Yes |
| ● Forcing, variables |
Inputs, outputs |
| ● Number of variables, max. |
10 |
| Diagnostic buffer |
| ● present |
Yes |
| ● Number of entries, max. |
100 |
| — adjustable |
No |
| Interrupts/diagnostics/status information |
| Alarms |
| ● Alarms |
No |
| Diagnostic messages |
| ● Diagnostic functions |
No |
| Diagnostics indication LED |
| ● Status indicator digital output (green) |
Yes |
| ● Status indicator digital input (green) |
Yes |
| Galvanic isolation |
| Galvanic isolation digital inputs |
| ● between the channels and the backplane bus |
Yes |
| Galvanic isolation digital outputs |
| ● between the channels and the backplane bus |
Yes |
| Permissible potential difference |
| between different circuits |
75 VDC / 60 VAC |
| Isolation |
| Isolation tested with |
500 V DC |
| Configuration |
| Configuration software |
| ● STEP 7 |
Yes; V5.2 SP1 or higher and S7 Technology option package |
| Programming |
| ● Command set |
see instruction list |
| ● Nesting levels |
8 |
| ● System functions (SFC) |
see instruction list |
| ● System function blocks (SFB) |
see instruction list |
| Programming language |
| — LAD |
Yes |
| — FBD |
Yes |
| — STL |
Yes |
| — SCL |
Yes |
| — CFC |
Yes |
| — GRAPH |
Yes |
| — HiGraph® |
Yes |
| Know-how protection |
| ● User program protection/password protection |
Yes |
| Cycle time monitoring |
| ● lower limit |
1 ms |
| ● upper limit |
6 000 ms |
| ● adjustable |
Yes |
| ● preset |
150 ms |
| Dimensions |
| Width |
160 mm |
| Height |
125 mm |
| Depth |
130 mm |
| Weights |
| Weight, approx. |
750 g |
| last modified: |
21.08.2014 |
