 |
|
| Supply voltage |
| 24 V DC |
Yes |
| permissible range, lower limit (DC) |
20.4 V |
| permissible range, upper limit (DC) |
28.8 V |
| Load voltage L+ |
| ● Rated value (DC) |
24 V |
| ● Reverse polarity protection |
Yes |
| Digital outputs |
| Load voltage L+ |
| — Rated value (DC) |
24 V |
| — Reverse polarity protection |
No |
| Input current |
| Current consumption (in no-load operation), typ. |
200 mA |
| Inrush current, typ. |
2.5 A |
| I²t |
1 A²·s |
| Power losses |
| Power loss, typ. |
6 W |
| Memory |
| Work memory |
| ● Integrated |
256 kbyte |
| ● expandable |
No |
| Load memory |
| ● pluggable (MMC) |
Yes |
| ● pluggable (MMC), max. |
8 Mbyte |
| ● Data management on MMC (after last programming), min. |
10 y |
| Backup |
| ● present |
Yes |
| ● without battery |
Yes |
| CPU processing times |
| for bit operations, typ. |
0.1 µs |
| for bit operations, max. |
0.1 µs |
| for word operations, typ. |
0.2 µs |
| for fixed point arithmetic, typ. |
2 µs |
| for floating point arithmetic, typ. |
3 µs |
| CPU-blocks |
| Number of blocks (total) |
1 024 |
| DB |
| ● Number, max. |
1 023 |
| ● Size, max. |
64 kbyte |
| FB |
| ● Number, max. |
1 024 |
| ● Size, max. |
64 kbyte |
| FC |
| ● Number, max. |
1 024 |
| ● Size, max. |
64 kbyte |
| OB |
| ● Size, max. |
64 kbyte |
| ● Number of free cycle OBs |
1 |
| ● Number of time alarm OBs |
1 |
| ● Number of delay alarm OBs |
1 |
| ● Number of time interrupt OBs |
1 |
| ● Number of process alarm OBs |
1 |
| ● Number of DPV1 alarm OBs |
3 |
| ● Number isochronous mode OBs |
1 |
| ● Number of technology synchronous alarm OBs |
1 |
| ● Number of startup OBs |
1 |
| ● Number of asynchronous error OBs |
5 |
| ● Number of synchronous error OBs |
2 |
| Nesting depth |
| ● per priority class |
8 |
| ● additional within an error OB |
4 |
| Counters, timers and their retentivity |
| S7 counter |
| ● Number |
256 |
| Retentivity |
| — can be set |
Yes |
| Counting range |
| — can be set |
Yes |
| — lower limit |
0 |
| — upper limit |
999 |
| IEC counter |
| ● present |
Yes |
| S7 times |
| ● Number |
256 |
| of which retentive without battery |
| — can be set |
Yes |
| Retentivity |
| — can be set |
Yes |
| Time range |
| — lower limit |
10 ms |
| — upper limit |
9 990 s |
| IEC timer |
| ● present |
Yes |
| Data areas and their retentivity |
| Flag |
| ● Number, max. |
2 048 byte |
| ● Retentivity available |
Yes |
| ● Number of clock memories |
8 |
| Data blocks |
| ● Number, max. |
1 023 |
| ● Size, max. |
64 kbyte |
| ● Retentivity adjustable |
Yes |
| Local data |
| ● per priority class, max. |
1 024 byte |
| Address area |
| I/O address area |
| ● Inputs |
2 048 byte |
| ● Outputs |
2 048 byte |
| of which, distributed |
| — Inputs |
2 048 byte |
| — Outputs |
2 048 byte |
| Process image |
| ● Inputs, adjustable |
2 048 byte |
| ● Outputs, adjustable |
2 048 byte |
| ● Inputs, default |
128 byte |
| ● Outputs, default |
128 byte |
| Subprocess images |
| ● Number of subprocess images, max. |
1 |
| Digital channels |
| ● Inputs |
16 384 |
| ● Outputs |
16 384 |
| ● Inputs, of which central |
512 |
| ● Outputs, of which central |
512 |
| Analog channels |
| ● Inputs |
1 024 |
| ● Outputs |
1 024 |
| ● Inputs, of which central |
64 |
| ● Outputs, of which central |
64 |
| Hardware configuration |
| Expansion devices, max. |
0 |
| Number of DP masters |
| ● Integrated |
2 |
| ● Via CP |
2 |
| Number of operable FMs and CPs (recommended) |
| ● FM |
8 |
| ● CP, point-to-point |
8 |
| ● CP, LAN |
10 |
| Rack |
| ● Racks, max. |
1 |
| ● Modules per rack, max. |
8 |
| Time of day |
| Clock |
| ● Hardware clock (real-time clock) |
Yes |
| ● battery-backed and synchronizable |
Yes |
| ● Deviation per day, max. |
10 s |
| ● Backup time |
6 wk |
| Operating hours counter |
| ● Number |
1 |
| ● retentive |
Yes |
| Clock synchronization |
| ● supported |
Yes |
| ● to MPI, master |
Yes |
| ● to MPI, slave |
Yes |
| ● to DP, master |
Yes |
| ● to DP, slave |
Yes |
| ● in AS, master |
Yes |
| ● in AS, slave |
Yes |
| Digital inputs |
| Number of digital inputs |
4 |
| ● of which, inputs usable for technological functions |
4 |
| Input characteristic curve in accordance with IEC 61131, type 1 |
Yes |
| Number of simultaneously controllable inputs |
| horizontal installation |
| — up to 40 °C, max. |
4 |
| — up to 60 °C, max. |
4 |
| vertical installation |
| — up to 40 °C, max. |
4 |
| Input voltage |
| ● Rated value, DC |
24 V |
| Input current |
| ● for signal "1", typ. |
7 mA |
| Input delay (for rated value of input voltage) |
| for counter/technological functions |
| — at "0" to "1", max. |
10 µs |
| — at "1" to "0", max. |
10 µs |
| Cable length |
| ● Cable length, shielded, max. |
1 000 m |
| Digital outputs |
| Number of digital outputs |
8 |
| ● of which high-speed outputs |
8 |
| short-circuit protection |
Yes |
| Controlling a digital input |
No |
| Switching capacity of the outputs |
| ● Lamp load, max. |
5 W |
| Load resistance range |
| ● lower limit |
48 Ω |
| ● upper limit |
4 kΩ |
| Output voltage |
| ● for signal "0", max. |
3 V |
| Output current |
| ● for signal "1" rated value |
0.5 A |
| ● for signal "1" permissible range for 0 to 60 °C, min. |
5 mA |
| ● for signal "1" permissible range for 0 to 60 °C, max. |
0.6 A |
| ● for signal "0" residual current, max. |
0.3 mA |
| Parallel switching of 2 outputs |
| ● for increased power |
No |
| ● for redundant control of a load |
No |
| Switching frequency |
| ● with resistive load, max. |
100 Hz |
| ● with inductive load, max. |
0.2 Hz |
| ● on lamp load, max. |
100 Hz |
| Aggregate current of outputs (per group) |
| horizontal installation |
| — up to 40 °C, max. |
4 A |
| — up to 60 °C, max. |
3 A |
| all other mounting positions |
| — up to 40 °C, max. |
3 A |
| Cable length |
| ● Cable length, shielded, max. |
1 000 m |
| Analog inputs |
| Number of analog inputs |
0 |
| Analog outputs |
| Number of analog outputs |
0 |
| Encoder |
| Connectable encoders |
| ● 2-wire sensor |
No |
| Interfaces |
| Number of RS 422 interfaces |
0 |
| Number of other interfaces |
0 |
| 1st interface |
| Isolated |
Yes |
| Power supply to interface (15 to 30 V DC), max. |
200 mA |
| Functionality |
| ● MPI |
Yes |
| ● DP master |
Yes |
| ● DP slave |
Yes |
| ● Point-to-point connection |
No |
| MPI |
| ● Number of connections |
32 |
| ● Transmission rate, max. |
12 Mbit/s |
| Services |
| — PG/OP communication |
Yes |
| — Routing |
Yes |
| — Global data communication |
Yes |
| — S7 basic communication |
Yes |
| — S7 communication |
Yes |
| — S7 communication, as client |
No |
| — S7 communication, as server |
Yes |
| DP master |
| ● Transmission rate, max. |
12 Mbit/s |
| ● Number of DP slaves, max. |
124 |
| Services |
| — PG/OP communication |
Yes |
| — Routing |
Yes |
| — Global data communication |
No |
| — S7 basic communication |
Yes |
| — S7 communication |
Yes |
| — S7 communication, as client |
No |
| — S7 communication, as server |
Yes |
| — Equidistance mode support |
Yes |
| — Isochronous mode |
Yes |
| — SYNC/FREEZE |
Yes |
| — Activation/deactivation of DP slaves |
Yes |
| — DPV1 |
Yes |
| Address area |
| — Inputs, max. |
2 048 byte |
| — Outputs, max. |
2 048 byte |
| User data per DP slave |
| — Inputs, max. |
244 byte |
| — Outputs, max. |
244 byte |
| DP slave |
| ● Transmission rate, max. |
12 Mbit/s |
| ● Automatic baud rate search |
No |
| ● Address area, max. |
32 |
| ● User data per address area, max. |
32 byte |
| Services |
| — PG/OP communication |
Yes |
| — Routing |
Yes |
| — Global data communication |
No |
| — S7 basic communication |
No |
| — S7 communication |
Yes |
| — S7 communication, as client |
No |
| — S7 communication, as server |
Yes |
| — Direct data exchange (slave-to-slave communication) |
Yes |
| — DPV1 |
No |
| Transfer memory |
| — Inputs |
244 byte |
| — Outputs |
244 byte |
| 2nd interface |
| Isolated |
Yes |
| Power supply to interface (15 to 30 V DC), max. |
200 mA |
| Functionality |
| ● MPI |
No |
| ● DP master |
Yes |
| ● DP slave |
No |
| ● Point-to-point connection |
No |
| DP master |
| ● Transmission rate, max. |
12 Mbit/s |
| ● Number of DP slaves, max. |
64 |
| Services |
| — PG/OP communication |
No |
| — Routing |
No |
| — Global data communication |
No |
| — S7 basic communication |
No |
| — S7 communication |
No |
| — Equidistance mode support |
Yes |
| — Isochronous mode |
Yes |
| — SYNC/FREEZE |
No |
| — Activation/deactivation of DP slaves |
Yes |
| — DPV1 |
No |
| Address area |
| — Inputs, max. |
1 024 byte |
| — Outputs, max. |
1 024 byte |
| User data per DP slave |
| — Inputs, max. |
244 byte |
| — Outputs, max. |
244 byte |
| DP slave |
| ● Transmission rate, max. |
12 Mbit/s |
| Communication functions |
| PG/OP communication |
Yes |
| Global data communication |
| ● supported |
Yes |
| ● Number of GD loops, max. |
8 |
| ● Number of GD packets, max. |
8 |
| ● Number of GD packets, transmitter, max. |
8 |
| ● Number of GD packets, receiver, max. |
8 |
| ● Size of GD packets, max. |
22 byte |
| ● Size of GD packet (of which consistent), max. |
22 byte |
| S7 basic communication |
| ● supported |
Yes |
| ● User data per job, max. |
76 byte |
| ● User data per job (of which consistent), max. |
76 byte |
| S7 communication |
| ● supported |
Yes |
| ● as server |
Yes |
| ● As client |
Yes |
| S5-compatible communication |
| ● supported |
Yes |
| Number of connections |
| ● overall |
16 |
| ● usable for PG communication |
15 |
| — reserved for PG communication |
1 |
| — Adjustable for PG communication, min. |
1 |
| — Adjustable for PG communication, max. |
15 |
| ● usable for OP communication |
15 |
| — reserved for OP communication |
1 |
| — adjustable for OP communication, min. |
1 |
| — adjustable for OP communication, max. |
15 |
| ● usable for S7 basic communication |
12 |
| — Reserved for S7 basic communication |
0 |
| — adjustable for S7 basic communication, min. |
0 |
| — adjustable for S7 basic communication, max. |
12 |
| ● usable for routing |
8 |
| S7 message functions |
| Number of login stations for message functions, max. |
16 |
| Process diagnostic messages |
Yes |
| simultaneously active Alarm-S blocks, max. |
40 |
| Test commissioning functions |
| Status block |
Yes |
| Single step |
Yes |
| Number of breakpoints |
2 |
| Status/control |
| ● Status/control variable |
Yes |
| ● Number of variables, max. |
30 |
| ● of which status variables, max. |
30 |
| ● of which control variables, max. |
14 |
| Forcing |
| ● Forcing |
Yes |
| ● Number of variables, max. |
10 |
| Diagnostic buffer |
| ● present |
Yes |
| ● Number of entries, max. |
100 |
| — can be set |
No |
| Interrupts/diagnostics/status information |
| Alarms |
| ● Alarms |
No |
| Diagnostic messages |
| ● Diagnostic functions |
No |
| Diagnostics indication LED |
| ● Status indicator digital output (green) |
Yes |
| ● Status indicator digital input (green) |
Yes |
| Galvanic isolation |
| Galvanic isolation digital inputs |
| ● between the channels and the backplane bus |
Yes |
| Galvanic isolation digital outputs |
| ● between the channels and the backplane bus |
Yes |
| Ambient conditions |
| Operating temperature |
| ● Min. |
0 °C |
| ● max. |
60 °C |
| Configuration |
| Configuration software |
| ● STEP 7 |
Yes |
| programming |
| ● Nesting levels |
8 |
| Programming language |
| — LAD |
Yes |
| — FBD |
Yes |
| — STL |
Yes |
| — SCL |
Yes |
| — CFC |
Yes |
| — GRAPH |
Yes |
| — HiGraph® |
Yes |
| Know-how protection |
| ● User program protection/password protection |
Yes |
| Cycle time monitoring |
| ● lower limit |
1 ms |
| ● upper limit |
6 000 ms |
| ● can be set |
Yes |
| ● preset |
150 ms |
| Dimensions |
| Width |
160 mm |
| Height |
125 mm |
| Depth |
130 mm |
| Weights |
| Weight, approx. |
750 g |
| last modified: |
16.09.2014 |
