 |
|
| Supply voltage |
| Load voltage L+ |
| ● Rated value (DC) |
24 V |
| ● permissible range, lower limit (DC) |
20.4 V |
| ● permissible range, upper limit (DC) |
28.8 V |
| Input current |
| from backplane bus 5 V DC, max. |
240 mA |
| from sensor current supply or external current supply (24 V DC), max. |
128 mA |
| Power losses |
| Power loss, typ. |
9 W |
| Digital inputs |
| Number of digital inputs |
32 |
| Input voltage |
| ● Rated value, DC |
24 V |
| Input current |
| ● for signal "1", typ. |
4 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — at "0" to "1", max. |
4.5 ms |
| Digital outputs |
| Number of digital outputs |
32 |
| short-circuit protection |
No |
| Output voltage |
| ● for signal "0", max. |
0.1 V |
| Output current |
| ● for signal "1" rated value |
750 mA |
| Aggregate current of outputs (per group) |
| all mounting positions |
| — maximum current per conductor/group |
0.75 A |
| Relay outputs |
| Switching capacity of contacts |
| — with inductive load, max. |
0.75 A |
| — on lamp load, max. |
5 W |
| — with resistive load, max. |
0.75 A |
| Cable length |
| ● Cable length, shielded, max. |
500 m |
| ● Cable length unshielded, max. |
150 m |
| Encoder |
| Connectable encoders |
| ● 2-wire sensor |
Yes |
| — Permissible quiescent current (2-wire sensor), max. |
1 mA |
| Galvanic isolation |
| Galvanic isolation digital inputs |
| ● Galvanic isolation digital inputs |
Yes |
| ● between the channels, in groups of |
16 |
| Galvanic isolation digital outputs |
| ● Galvanic isolation digital outputs |
Yes |
| ● between the channels, in groups of |
16 |
| Connection method |
| Plug-in I/O terminals |
Yes |
| Dimensions |
| Width |
196 mm |
| Height |
80 mm |
| Depth |
62 mm |
| Weights |
| Weight, approx. |
500 g |
| last modified: |
16.09.2014 |
