6ES7153-2BA02-0XB0 ET200M, INTERFACE IM153-2 HF

0 reviews | Write a review

Product Code: 6ES7153-2BA02-0XB0

Availability: In Stock

Price: $245.92

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7153-2BA02-0XB0

		SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 12 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE NEW FEATURES: 12 MODULES / STATION SLAVE INITIATIVE FOR SWITCHES AND DRIVE ES EXTENDED DATA FOR HART SECON- DARY VARIABLES OPERATON WITH 64PT MODULES EXTENDES TIMESTAMPS WITH 32 SIGNALS / SLOT
General information
Vendor identification (VendorID)		801Eh
Supply voltage
24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
permissible range (ripple included), lower limit (DC)		20.4 V
permissible range (ripple included), upper limit (DC)		28.8 V
External protection for supply cables (recommendation)		2,5 A
Mains buffering
● Mains/voltage failure stored energy time		5 ms
Input current
Current consumption, max.		650 mA
Inrush current, typ.		3 A
I²t		0.1 A²·s
Output voltage
Rated value (DC)		5 V
Output current
for backplane bus (5 V DC), max.		1.5 A
Power losses
Power loss, typ.		5.5 W
Address area
Addressing volume
● Inputs		244 byte
● Outputs		244 byte
Hardware configuration
Number of modules per DP slave interface, max.		12
Time stamping
Accuracy		1 ms; 1ms at up to 8 modules; 10ms at up to 12 modules
Number of message buffers		15
Messages per message buffer		20
Number of stampable digital inputs, max.		128; Max. 128 signals/station; max. 32 signals/slot
Time format		RFC 1119
Time resolution		0.466 ns
Time interval for transmitting the message buffer if a message is present		1 000 ms
Time stamp on signal change		rising / falling edge as signal entering or exiting
Interfaces
Interface physics, RS 485		Yes
Interface physics, FOC		No
PROFIBUS DP
● Node addresses		1 to 125 permitted
● Automatic detection of transmission speed		Yes
● PROFIBUS DP, output current, max.		70 mA
● Transmission rate, max.		12 Mbit/s
● Transmission procedure		RS 485
● SYNC capability		Yes
● FREEZE capability		Yes
● Direct data exchange (slave-to-slave communication)		Yes; Sender
● PROFIBUS DP		9-pin sub D
1st interface
DP slave
● GSD file		SI04801.GSG
● Automatic baud rate search		Yes
Communication functions
Bus protocol/transmission protocol		PROFIBUS DP to EN 50170
Isolation
Isolation checked with		Isolation voltage 500 V
Degree and class of protection
Degree of protection to EN 60529
● IP20		Yes
Ambient conditions
Operating temperature
● Min.		0 °C
● max.		60 °C
Air pressure
● Operating altitude above sea level, max.		3 000 m
Configuration
Configuration software
● STEP 7		Yes; STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file
Dimensions
Width		40 mm
Height		125 mm
Depth		117 mm
Weights
Weight, approx.		360 g
last modified:		13.10.2014