6ES7153-1AA03-0XB0 ET200M, INTERFACE MODULE IM153-1

0 reviews | Write a review

Product Code: 6ES7153-1AA03-0XB0

Availability: In Stock

Price: $161.66

Qty:

Add to Wish List

Add to Compare

Description
Reviews (0)

Artikelnummer

6ES7153-1AA03-0XB0

		SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
General information
Vendor identification (VendorID)		801Dh
Supply voltage
24 V DC		Yes
permissible range, lower limit (DC)		20.4 V
permissible range, upper limit (DC)		28.8 V
permissible range (ripple included), lower limit (DC)		20.4 V
permissible range (ripple included), upper limit (DC)		28.8 V
External protection for supply cables (recommendation)		not necessary
Mains buffering
● Mains/voltage failure stored energy time		5 ms
Input current
Current consumption, max.		350 mA; at 24 V DC
Rated value at 24 V DC		625 mA
Inrush current, typ.		2.5 A
I²t		0.1 A²·s
Output voltage
Rated value (DC)		5 V
Output current
for backplane bus (5 V DC), max.		1 A
Power losses
Power loss, typ.		3 W
Address area
Addressing volume
● Inputs		128 byte
● Outputs		128 byte
Hardware configuration
Number of modules per DP slave interface, max.		8
Interfaces
Interface physics, RS 485		Yes
Interface physics, FOC		No
PROFIBUS DP
● Node addresses		1 to 125 permitted
● Automatic detection of transmission speed		Yes
● PROFIBUS DP, output current, max.		90 mA
● Transmission rate, max.		12 Mbit/s
● Transmission procedure		RS 485
● SYNC capability		Yes
● FREEZE capability		Yes
● Direct data exchange (slave-to-slave communication)		Yes; Sender
● PROFIBUS DP		9-pin sub D socket
1st interface
DP slave
● GSD file		(for DPV1) SIEM801D.GSD; SI01801D.GSG
● Automatic baud rate search		Yes
Communication functions
Bus protocol/transmission protocol		PROFIBUS DP to EN 50170
Isolation
Isolation checked with		Isolation voltage 500 V
Degree and class of protection
Degree of protection to EN 60529
● IP20		Yes
Ambient conditions
Operating temperature
● Min.		0 °C
● max.		60 °C
Air pressure
● Operating altitude above sea level, max.		3 000 m
Configuration
Configuration software
● STEP 7		STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file
Dimensions
Width		40 mm
Height		125 mm
Depth		117 mm
Weights
Weight, approx.		360 g
last modified:		25.09.2014